Fabricante:
(Categoria: 102)
number of spindles:6 spindle passage:22 mm?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU.The complete energy supply of all 6 main spindles was replaced in April 25.No socket for powered tools!
BLIN BL-CAK6140 CNC Lathe Type: CNC lathe Manufacturer: Ningbo Blin Machinery Co., Ltd. Model: BL-CAK6140 / CAK6140B Year of manufacture: 2020 Control: GSK CNC 980TDb Machine configuration: Flat bed CNC lathe with tailstock Swing over bed: approx. 400 mm Distance between centres: approx. 1000 mm Spindle speed range: 100–2000 rpm Main motor power: 7.5 kW Total power: 10 kVA Voltage: 380 V Phase: 3 phase Frequency: 50 Hz Total current: 40 A, to be confirmed Chuck type: 3-jaw chuck Tailstock: Included Tool post: 4-position turret / tool holder, to be confirmed X-axis ball screw pitch: 5 mm Z-axis ball screw pitch: 8 mm Rapid traverse X-axis: 3 m/min Rapid traverse Z-axis: 4 m/min Positioning accuracy X-axis: 0.02 mm Positioning accuracy Z-axis: 0.022 mm Repositioning accuracy X-axis: 0.01 mm Repositioning accuracy Z-axis: 0.011 mm Minimum input unit X-axis: 0.001 mm on diameter Minimum i ...
weight of the machine ca.:18 tcentre distance:700 mmmax. swing diameter:200 mmLathe with 4 tools only for 3-cylinder crank shaft
weight of the machine ca.:18 tcentre distance:700 mmmax. swing diameter:200 mmLathe with 4 tools only for 3-cylinder crank shaft
max. workpiece diameter:29 mmmin. workpiece diameter:26 mmworkpiece length:66 mmthe system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mmChanging parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mmTotal length will probably be almost 400 mm possible with a few conversions.Also dependent on tool lengths, machining lengths on the component, etc.Workpiece: Piston pin Drawing number: WHT 000 718, WHT 000 718 A Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65 Length: 66 or 65 mm Material: 17Cr3Quantity: xxx parts / year Cycle time: 5 sec. However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing the clampi ...
Conventional centre lathe with DRO EXCEL Distance Between Centres 2200 mm Centre Height 250 mm Swing Over Bed 500 mm / approx. 20 in Swing in Gap 700 mm Gap Length 315 mm Swing Over Cross Slide 300 mm Bed Width 400 mm Cross Slide Travel 315 mm Top Slide Travel 130 mm Spindle / Headstock Item Specification Spindle Nose DIN 55027 C8 Spindle Taper Metric 80 Spindle Bore 78 mm Number of Spindle Speeds 21 Spindle Speed Range 20–2000 rpm Main Spindle Motor 11 kW / 15 HP This item is delivered loaded on truck or container. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-47114-3
turning diameter:250 mmswing diameter:250 mmturning height:200 mmtotal power requirement:37,7 kWchuck diameter:315 mmspindle speed max.:5500 1/mintravel -x axis:625 mmtravel -y axis:+100/-80 mmtravel -z axis:250 mmworktool system:VDI 30+40 weight of the machine ca.:8 tThe synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm.Typical components are ball cages, ball hubs, gear wheels, sliding sleeves,pump wheels, flanges, synchronizer rings, bearing rings and pivot pins.The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.
Manufacturer: TRAUB Model: TNS 30/42 CNC lathe Year of construction: 1989 Control: TRAUB System TX-8D Operating hours: approx. 24,600 h Electrical connection: 380 V / 50 Hz Motor power: approx. 34 kW Coolant facility available Original documentation available Programming instructions included Schematics included Spare parts documents included Machine starts, control active Auction-ID: A1-47153-8011
number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:8,6 tspindle drive motor:11 kW
turning diameter:200 mmturning height:120 mmweight of the machine ca.:18 tAvailable from 01.08.2024
turning diameter:1000 mmswing diameter:1000 mmMachine type: Vertical latheManufacturer: HessappType: DV 62Serial no.: 14.2308Working range of the spindleLargest diameter 1000 mmLargest swing diameter 1000 mmCross slide travelStroke of the vertical slide 900 mmStroke of the horizontal slide 1810 mmTotal travel 2315 mmTurning spindleSpindle head with centering cone according to DIN 55021 A15Spindle diameter in the front bearing 203 mmMain driveVia a controlled asynchronous motor and gear transmissionwith range switching.Spindle speedsSpeed range I: 5 - 350 rpm.Speed range II: 30 - 1000 rpm.Travel speedX/Z axis: 10 m/min.W1 axis: 8 rpmNo C-AxisTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser ...
faceplate diameter:800 mmpower requirement:110 kWweight of the machine ca.:37.000 / total 52.000 ttransport measurements machine:5,07 x 2,98 x 3,90 mclamping diameter:800 mm:Ø 800 x 720 mmTool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis
faceplate diameter:1600 mmpower requirement:80 kWweight of the machine ca.:25 tdimensions of the machine ca.:4,4 x 4,62 mmax. workpiece diameter:2000 mmmax. diameter of face turning:1800 mmtool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis
turning diameter:270 -300 mmturning length:710 mmtotal power requirement:43 kWweight of the machine ca.:8,5 tdimensions of the machine ca.:3,16 x 2,15 x 2,15 mThe machine does not include a chuck or tools ? the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one.
turning diameter:250 mmswing diameter:260 mmAvailable from October 10, 2025 The system consists of two individual systems that are linked together.No driven tools!
turning diameter:220 mmturning length:310 mmtotal power requirement:17 kWweight of the machine ca.:3,3 tdimensions of the machine ca.:2,25 x 1,63 x 1940 mgreates pass round over bed:430 mmbore diameter:45 mmcentre distance:687 mmslide travel radial ( X-axis ):160 mmslide travel axial ( Z-axis ):310 mmspindle turning speed range:0-6.300 U/min
turning diameter:220 mmturning length:700 / 665 mmtotal power requirement:17 kWweight of the machine ca.:2,6 tdimensions of the machine ca.:2,63 x 1,98 x 1,94 mgreates pass round over bed:430 mmPart length max.:510 slide travel radial ( X-axis ):160 mmbore diameter:45 mmTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.
turning diameter:360 mmturning length:520 mmtotal power requirement:20 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3 x 2 x 2 m
turning diameter:360 mmturning length:520 mmtotal power requirement:20 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3 x 2 x 2 m
turning diameter: 570 mmturning length: 2000 mmcontrol: num + CNC Keller centre height: 280 mmturning dia. over face-slide: 365 mmspindle bore: 62 mmspindle turning speed range: 3 - 2500 U/minspindle head: DIN 55 027 Gr. 8 cutting speed: Konstant 1 - 9999 m/minfeed in x - axis: 0,01 - 50 mm/Ufeed range Z-direction: 0,01 - 50 mm/Urapid travel - longitudinal/face: 10 / 5 m/minfeed power: x-Achse 7100 Nfeed power: z-Achse 12.500 Ntravel of cross-slide: 345 mmupper slide travel: 125 mmbed width: 360 mmtailstock quill diameter: 80 mmtailstock quill stroke: 190 mmtailstock taper MT: 5 max. workpiece weight -without tailstock: 400 kgmax. workpiece weight between centres: 1000 kgmax.workpiece weight:each extra steadyrest: 300 kgthreading metric: 0,1 - 400 mm/Stg.dimensions of machine L x W x H: 3,98 x 1,87 x 1,81 mtotal power requirement: kWweight of the machine ca.: tAccessories: 3-jaw ch ...
turning diameter: 65 mmturning length: 150 mmcontrol: Siemens 840D spindle passage: 75 mmturning length: 150 mmc-axis: 2x 0,001 °gripping station: 65 mmspeeds: 5000 U/minrapid traverse: 30 m/minturret (x-stations): 3x12 Number of working hours: hNumber of axles: 10 St.number of toolholder-holes: 36 chip conveyor: ja / yes kWcoolant filtering unit: ja / yes kWtotal power requirement: 22 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 4,4 x 2 x 2,3 + Iemca mbar loader: Iemca Master 880 DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles,3 turrets with Iemca Master 880 loading magazineAccessories:a large number of tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock versionThe machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith live tools:VDI40 Live tooling VDI40with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock versionChip conveyor, belt filter press, hydraulic unit, as well as infeed and outfeed chain conveyor EWAP, with 33 pallets. The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith automatic loading and unloading system, chip conveyorG300 with "spindle bore clamping capacity 90mm" in tailstock versionThe machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:250 mmswing diameter:260 mmAvailable from October 10, 2025 The system consists of two individual systems that are linked together.No driven tools!
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 46970 €: 897.13 €: 500 mm: 1500 mm: 250 mm: 80 mm: 300 mm: 400 mm: 8 : 80 MK: 21 : 20-2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 240 - 1 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7.5 kW: 3100 mm: 1250 mm: 1400 mm: 2820 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 250 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm € 49010,00 turning length3.000 mm € 53 ...
Manufacturer: Herrez Sculfort Model No.: MaxiCap Numerical control: Fagor 8025-TGI Control: Fagor 8025 12-position turret Hydraulic Plate Hydraulic tailstock Diameter on bed: 500 mm Diameter on trolley: 400 mm Distance between points: 1200 mm original machine (expandable to 2000 mm) Spindle speed: 0 - 1156 rpm CNC lathe supplied with hydraulic unit, 3-jaw self-centering plate, tool holder, clamping blocks and various accessories visible in the photographs. The machine has a work area protected by enclosure and Fagor CNC control. Includes: Self-centering 3-jaw plate Hydraulic unit Tool holder and lashing block set Accessories and tooling shown in the images Sold in the condition it is in. Auction-ID: A7-47344-32
10.000 € 
