Fabricante:
(Categoria: 102)
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113620 €: 2147.42 €: 800 mm: 2000 mm: 400 mm: 260 mm: 560 mm: 560 mm: 318 MK: 12 : 8 - 400 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 11 kW: 6000 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type C, system like Multifix i ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 138800 €: 2623.32 €: 1020 mm: 2000 mm: 510 mm: 358 mm: 770 mm: 560 mm: 361 MK: 12 : 6,3 - 315 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 505 mm: 270 mm: 105 mm: 6 MK: 225 mm: 18.5 kW: 6400 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type D1, system like Mult ...
: gebraucht : 2015 : 1686 : prompt, Zwischenverkauf v : England : 14800 €: 1 : 330 mm: 1000 mm: 167 mm: 38 mm: 210 mm: 12 : 40 - 2500 1/min: 16 : 0.03 - 1 mm/U: 0.2 - 14 mm: 2 - 56 TPI Gänge/: 190 mm: 92 mm: 42 mm: 3 MK: 110 mm: 2.2 kW: 1940 mm: 1000 mm: 1550 mm: 685 kg3-axis digital read out Newall4-jaw chuck Bison diameter 160mm with inside and outside jawsQuick-change tool post with 1 holdCoolant deviceChuck protectionSteel holder protectionLead screw coverMachine lightManual brakeOperating manual in German with EC declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• R ...
turning diameter: 500 mmturning length: 1000 mmcontrol: Heidenhain total power requirement: kWweight of the machine ca.: 3200 kg tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: - mmturning length: - mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc - - -: - - - - - -- - -: - - - - - -Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant systemThe machine is in a well-maintained condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL4 | VL-4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc - - -: - - - - - -- - -: - - - - - -Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant systemThe machine is in a well-maintained condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL4 | VL-4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc - - -: - - - - - -- - -: - - - - - -Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant systemThe machine is in a well-maintained condition and can be inspected at any time under power.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL4 | VL-4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : Bulgarien : 128710 €: 2432.62 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 MK: 5 - 1000 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 8550 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 113860,00 turning length 2.000 mm € 118510,00 turning length4.000 mm € 137250,00 turning length5.000 mm € 148550,00 turning length ...
: neu : Bulgarien : 114970 €: 2172.93 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 MK: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 100120,00 turning length2.000 mm € 103850,00 turning length4.000 mm € 123510,00 turning length5.000 mm € 134810,00 turning length6.000 ...
OPTIMUM TH 4610 Lead and Pull Spindle Lathe (2018) Serial Number: J0517120461 Tip width: 1060 mm Tip height: 230 mm Circulation over bed: 460 mm Circulation over slide: 270 mm Turning length: 240 mm Bore main spindle: 58 mm Max. workpiece weight: 300 kg Morse taper of main spindle: MK6 Spindle speed range: 25 – 2000 rpm Facing slide travel 285 mm Upper slide travel: 125 mm Quill diameter: 60 mm Quill path 130 mm Cone in the quill: MK4 Diameter of three-jaw chuck: approx. 200 mm Feel free to take a look at the videos about this machine Auction-ID: A7-47533-118
G.D.W. 360 Z CNC lathe (2002) Serial Number: 2104025 Control: HEIDENHAIN MANUALplus M Tip height: 175 mm Circumferential diameter over bed: 355 mm Circumferential diameter over face slide: 195 mm Turning length: 750 mm Bed width: 260 mm Travels: X-axis: 180 mm Z-axis: 800 mm Quill stroke: 110 mm Quill diameter: 50 mm Recording: MK3 Auction-ID: A7-47533-150
WEILER Matador VS2 Lead and Pull Spindle Lathe Serial Number: 7351 Center width: 500 mm Tip height: 140 mm Circulation over bed: 295 mm Circulation over bed slide: 280 mm Circulation via face slide: 160 mm Turning length: 470 mm Spindle bore: 36 mm Max. workpiece weight: 80 kg Spindle speed range: 15 – 3550 rpm Quill diameter: 40 mm Quill stroke: 85 mm Auction-ID: A7-47533-124
WEILER primus LZ-G Lead and Pull Spindle Lathe (1978) Serial Number: 722 Center width: approx. 500 mm Tip height: approx. 125 mm Circulation over bed: approx. 250 mm Speed range: 90 – 3000 rpm Feel free to take a look at the videos about this machine Auction-ID: A7-47533-121
Technical data Manufacturer: HAMLET Machine type: Lead and pull spindle lathe 3-jaw chuck mounted Lead screw and pull screw available Threading device available Interchangeable wheel arch available Configuration Collet set included in the base Extensive accessory package with interchangeable wheels Tailstock available Upper slide available Longitudinal and plane feed Compact precision lathe in heavy-duty casting design Auction-ID: A7-47277-3011
Technical data Manufacturer: WEILER Model No.: Intern 140 Machine No.: 85140112 Operating voltage: 380 V Control voltage: 220 V Connected load: 2.2 kW Frequency: 50 Hz Speeds: 630 / 1000 / 1600 / 2500 rpm Center width approx. 800mm Configuration 3-jaw chuck Tailstock available Multifix tool holder HEIDENHAIN Digital Display Coolant Setup Base frame with storage space Accessories and interchangeable wheels in the base cabinet Machine in used condition Auction-ID: A7-47277-3056
Technical data Manufacturer: HAMLET Model: Primus Machine Type: Precision guide and pull spindle lathe Type: Conventional lathe Center height: approx. 125 mm (Source: online) Circumferential diameter over bed: approx. 250 mm (Source: online) Circumferential diameter over support: approx. 130 mm (Source: online) Center width: approx. 500 mm (Source: online) Spindle bore: approx. 28 mm (Source: online) Speed range: 60–3000 rpm (source: online, rev plate visible) Motor power: approx. 1.5–2.2 kW (Source: online) Configuration 3-jaw chuck Multifix quick-change steel holder Tailstock Machine Light Base frame with switching unit Various tool holders and drill chuck holders Accessory kit according to photos Note There are no original documents or technical documentation available for the machine. The technical data provided have been researched from several independent online sources an ...
Technical data Manufacturer: MATRA Type: MD 22 Machine type: Lead and pull spindle lathe Voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 17 A Fuse: 25 A Main motor: AEG AM 132 MR4 Motor speed: 1445 rpm Degree of protection: IP54 Speed range: approx. 100 – 2000 rpm Turning length: approx. 1500 mm Configuration 3-jaw chuck available Tailstock available Steel holder available Guide and pull spindle available Heidenhain digital displacement measuring system available Machine mounted on machine foot Used condition Auction-ID: A7-47277-3000
Technical data Manufacturer: WEILER Model No.: Matador Turning diameter over bed: 260 mm Speed range: 15 - 3550 rpm 34 speed levels Dimensions approx. 1500 x 800 x 1650 mm Configuration 3-jaw chuck HEIDENHAIN Digital Display MULTI SUISSE quick-change steel holder Tailstock available Collet set in the base cabinet Accessories with tips, clamping devices and tool holders Machine in used condition Auction-ID: A7-47277-3060
Technical data Manufacturer: HAMLET Type: UD 24 CNC Year of Make: 1993 Machine No.: 327 Control: Siemens Sinumerik 820 T GA3 Voltage: 380 V Connected load: 11.25 kW Max. circumferential Ø over bed: 190 mm Max. turning length between tips: 190 mm Spindle passage: 36 mm Max. spindle speed: 8000 rpm Operating hours: approx. 21909.8 h Configuration 2-axis path control Siemens 820 T GA3 8-fold tool system Tool wheel Ø 185 mm VDI 3425 Tool holder Ø20 mm Pneumatic-hydraulic tailstock Quill stroke 80 mm Quill Cone MK2 Hand Pneumatic Hydraulic Clamping Device Röhm Chuck Type 27/40 Pressure collet device Ø24 mm Prepared for bar feeding Workpiece collection and universal interface available Auction-ID: A7-47277-3045
turning diameter: 570 mmturning length: 1000 mmcontrol: WEILER D3 swing diameter over slide rest: 325 mmSwing in gap: 600 mmlength of gap: 140 mmspindle bore: 83 mmspindle diameter in front bearing: 120 mmface stroke: 340 mmlongitudinal stroke: 1100 mmworkpiece weight max.: 1200 kgspindle turning speed - stepless: 1 - 2500 U/mintransmission ratio: 2 rapid travel - longitudinal/face: 10 / 5 m/minmain drive motor: (60/100 % ED) 20 / 17 kWtailstock quill diameter: 80 mmtailstock quill stroke: 200 mmtailstock quill taper MT: 5 weight of the machine ca.: 3,8 tdimensions of the machine ca.: 2,95 x 1,90 x 1,82 mSwitch-on hours (date 18. May 2026): 28.970 h Control WEILER D3 Chip conveyor 4-station toolholder PARAT with several inserts 3-jaw chuck SCHUNK ROTA-S plus 315-92The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data Manufacturer: KNUTH Model: Basic 170 Super Machine Type: Lead and pull spindle lathe Center width: approx. 700 mm Dimensions: approx. H1300 x W700 x L1700 mm Configuration Three-jaw chuck mounted Tailstock available 4-fold tool holder available Machine light available Additional three-jaw chuck available Lathe chisel set available Dial gauge with magnetic base available Rotating centering tip available Various clamping devices and tool accessories available Auction-ID: A7-47277-3109
Technical data Manufacturer: WEILER Model: Matador VS1 Speed range: 30 - 3550 rpm 16 speed levels Electrical connection: 380 V Dimensions approx. 1500 x 700 x 1550 mm Configuration 3-jaw chuck HEIDENHAIN Digital Display Tailstock with drill chuck Quick-change steel holder Collet set in the base cabinet Accessories with tips, jaws and tool holders Protective cover on the chuck Machine in used condition Auction-ID: A7-47277-3058
Lead and pull spindle lathe - 3-jaw chuck 200mm - Quick-change steel holder - Bezel - Machine light - Chip tray - Grain tip Turning diameter over bed 480 mm Turning diameter over support 260 mm Turning length 1500 mm Turning diameter in the offset - mm Speed 90 - 1120 rpm Tip height 240 mm Spindle bore 52 mm Total power requirement 7.5 KW Machine weight approx. 2.3 t Space requirement approx. 3.0 x 1.3 x 1.5 m Auction-ID: A7-47818-734
ManufacturerSEIGER Präzisions-Maschinenbau TypeSLZ 570 E Year of manufacture2004 Series NR4330 Cycle lathe / CNC high-performance lathe with Siemens SINUMERIK control. Description with scope of delivery and condition description Used cycle lathe for chuck and shaft machining. The machine has a controlled main drive, servo-driven feed axes and a Siemens SINUMERIK control system with cycle rotation function. The machine comes from industrial use and is in well-maintained used condition. Signs of wear due to age and use present. Scope of delivery according to existing equipment: • 3-jaw chuck Ø 250 mm • Quick-change steel holder with tool holders • Coolant device • Machine light • Fixed and moving centering tip MK5 • Fixed bezel (12-150 mm) • Rotating bezel (12-125 mm) • Various tool holders and accessories • Documentation if available Technical data • Center ...
Technical data Lead and pull spindle lathe Manufacturer: NARDINI Type: ND 220 AE Speed range: 25 - 2000 rpm Electrical connection: 380 V / 50 Hz Connected load: 6.3 kW 3-jaw chuck Ø approx. 250 mm Configuration With guide and pull spindle With tailstock With quick-change steel holder Tapping device available Feed and thread tables on the machine Integrated machine substructure Emergency stop switch available Machine with splash guard Auction-ID: A7-47277-3016
Technical data Manufacturer: GUILD MASTER Model: CTX 400 Machine Type: CNC Lathe Control: Gildemeister CNC / ElektroPilot Operating hours: approx. 18,462 h Max. turning diameter: 400 mm (Source: online) Max. turning length: 640 mm (Source: online) Circumferential diameter over bed: 500 mm (Source: online) Spindle bore: 72 mm (Source: online) Speed range: 25 - 5,000 rpm (Source: online) X-travel: 212 mm (Source: online) Z-travel: 640 mm (Source: online) Tool turret: 12-speed (Source: online) Tool holder: VDI 30 (Source: online) Machine weight: approx. 5.1 - 5.5 t (Source: online) Configuration 3-jaw chuck Berg KH200 12-speed tool turret Powered tools available Tool turret prepared for powered tool holders Chip conveyor available Coolant equipment available Closed work area cladding CNC controller with screen Note No original technical documentation available. The technical data was r ...
turning diameter: 500 mmturning length: 1200 mmcontrol: Siemens 840D greates pass round over bed: 700 mmMain spindle:: turning speed range - main spindle: 20 - 5000 min/-1power capacity - main spindel: 25 /34 kWC-Axis: 0,0001 °spindle diameter: 65 mmmilling spindle: milling spindle motor: 23 / 13 kWmilling head speed: 12000 U/minb-axis: +/- 120 °axis stroke:: x-axis: 490 mmy-axis: +/- 100 mmz-axis: 1300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/minfeed power: 5,6 / 5,6 / 7,4 kNnumber of toolpositions: 24 pos.tool taper: HSK A 63 total power requirement: - kWweight of the machine ca.: 15 tdimensions of the machine ca.: 6 x 3 x 2,3 mCNC turning and milling center - 5 axes simultaneous- CNC control Siemens 840D Ergo Line with ShopTurn- C-axis (0.0001°)- Milling head with B-axis- Y-axis- Coolant device/paper belt filter (through Spindle)- Chip conveyor- Tailstock- SMW A ...
max. turning diameter: 580 mmturning length: 1500 mmcontrol: OSP 7000 L greates pass round over bed: 610 mmswing diameter over slide rest: 580 mmMain spindle:: turning speed range - main spindle: 12 - 2.800 min/-1spindle bearing diameter: 150 mmspindle bore: 110 mmspindle nose: JIS A2-11 power capacity - main spindel: 37 (30) kWC-Axis: 0,001 °axis stroke:: x-axis: 598 mmy-axis: 230 (+110 / -120) mmz-axis: 1.660 mmfeeds:: rapid traverse: X / Y: 12.000 mm/minrapid traverse: Z: 20.000 mm/minrapid traverse: C: 100 min/-1cutting feed speed: X / Z / Y: 0,001 - 1.000 mm/Uturret:: type: H2 ATC number of toolpositions: 2 (1x L-Tool / 1x M-Tool) pos.driven statition: stufenlos / stepless Spindle speed - driven tool stations: 40 - 3.000 min -1tool shank height: 25 mmBoring bar shank diameter: 50 mmTailstock:: diameter of quill: 120 mmquill stroke: 170 mmtaper of center: MT 5 tool magazin:: n ...
2.400 € 
