Fabricante:
(Categoria: 102)
Weiler Turret Lathe Manufacturer: Weiler Machine type: Turret Lathe Industrial turret lathe designed for metal turning operations. Equipped with a turret tool system for performing multiple machining operations with different cutting tools. Suitable for metalworking, component manufacturing and mechanical engineering applications. Reported to be in good condition and currently under power. Technical specifications: Machining process: Turning Tool system: Turret Operating status: Under power Approx. dimensions (L × W × H): 1,800 × 1,000 × 1,600 mm Approx. weight: 1,000 kg Condition: Used, good condition. All descriptions, technical specifications, dimensions, weights and other information are indicative only. Auction-ID: A7-50842-8
Equipped with:, Chip conveyor, maximum turning diameter Ø320 mm, maximum turning length 420 mm, maximum turning diameter above bed Ø520 mm, rod bore Ø56 mm, ASA-6 spindle cone, maximum spindle speed 4,000 rpm, 8 tool positions, chip conveyor and electrical connection 380 V, 3-phase, 50 Hz, 65 A. Auction-ID: A1-47365-8
control: FAGOR 8055 TC workpiece weight: 10.000 kghandwheel: inkl. Chip coveyor: inkl. centre height: 500 mmgreates pass round over bed: 1300 mmSwing diameter face slide: 1000 mmcentre distance: 5000 mmtravel of cross-slide: 680 mmrapid traverse x + z axis: 8 m/minbed width: 900 mmspindle nose: DIN 55026-11 number of spindle speeds: 0-800 U/min/rpmspindle bore: 104 mmspindle diameter in front bearing: 180 mmturning speed range:: Anzahl 4 main drive: 37 kWTorque: 10.000 Nm: Sauter 300 x 300 diameter of quill: 180 mmquill stroke: 300 mmHeight: BIS ZUR FLACHFÜHRUNG 805 mmtotal power requirement: 45 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mEquipment-4-jaw faceplate (independent jaws) Ø 800 mm -3-jaw faceplate (independent jaws) Ø 400 mm -Steady rest (4-point support) Ø 750 mm -Chuck guard -Full rear enclosure The data for this ad was created with ...
turning diameter: 660/275 mmturning length: 1498 mmcontrol: Fanuc/Mori Seiki MSX 701 total power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mm9-axis CNC turning and milling centre Fanuc MSX-701 CNC control Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. 40-position tool magazine 10-position turret at bottom, all positions driven 2 x 3-jaw quick-change chuck KNCS-N 315/91 KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system Chip conveyor Drain system for main spindle chuck (controlled via M function) Drain system for tool cutting edge (controlled via M function) Coolant gun incl. accessories Oil mist extraction Direct measuring system X1, X2, Y-axis Bar loader interface Double foot switch for both spindles Islands and pocket program ...
turning diameter: 570 mmturning length: 1000 mmcontrol: MANUALplus 620 swing diameter over face slide: 340 mmspindle bore: 93 mmspindle turning speed range: 1 - 3000 U/mintransmission ratio: 2 rapid power traverse in X-and Z direction: 7 / 10 m/minmax. workpiece weight -without tailstock: 500 kgmax. workpiece weight between centres: 1000 kgworkpiece weight in steadies max.: 1250 kgmain drive motor: (100/60% ED) 20 / 25 kWDimensions (LxWxH): 2,94 x 2,20 x 1,96 mmax. torque on the spindle: ca. 1400 Nmweight of the machine ca.: 3,4 t HEIDENHAIN MANUALplus 620 control system- Control system expansion for ICP and DIN programs, incl. thread repair Automatic 8-station SAUTER turret with driven stations, VDI shank D=30 mm,mounted in front of the turning center (limits achievable turning diameterand tailstock operations, reduces turning length) 2-speed planetary gearbox, automatic shifting Main s ...
turning diameter: 260 mmcontrol: Fanuc Oi-TC x-axis: 170 mmz-axis: 335 mm- path correction: turning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc Oi-TC12-fold revolverdriven toolsC-axischip conveyortail stockcoolant deviceTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 550 mmmax. Drehdurchmesser / max. turning diameter 260 mmX-Weg / X-travel 170 mmZ-Weg / Z-travel 335 mmmax. Stangendurchlass / max. bar diameter 51 mmDrehzahl / spindle speed 4500 UpM /rpmDrehzahl angetr. WKZ /speed of driven tools 5000 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesEilgang X / rapid feed X 36 m/minEilgang Z / rapid feed Z 36 m/min.Gewicht der Maschine ca. / weight ca. 3280 kgTechnische Daten, Zubehör und Beschreibung ...
: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC lathe with bar feeder Dimensions: lathe: l - 3.2m, w - 1.6m, h - 1.7m bar feeder: l - 2m, w - 0.7m, h - 1.2m Auction-ID: A1-50595-65
Manufacturer: GILDEMEISTERModel: CTX 400 Series 2Year: 1998German-made 2-axis CNC lathe, robust and precise, suitable for turning single parts and small to medium series. CNC : HEIDENHAIN TURN PLUSAxes: 2 axes (X, Z)Turning capacities:Diameter above bed: Ø 570 mmDiameter above carriage: Ø 420 mmX-axis stroke: 220 mmZ-axis stroke: 635 mmSpindle:Bore: 79 mmChuck diameter: Ø 250 mmSpindle speed: 25 – 5000 rpmMotor power: 21 kWFast feeds:X-axis: 20 m/minZ-axis: 24 m/minTurret: 12 positions VDI 30Equipment: automatic tailstock (Ø 80 mm), chip conveyor, parts collectorCountry of origin: GermanyCondition: used Auction-ID: A1-50714-4035
Technical details Type: CNC turning center Control system: ZIT Sistema 500T Configuration: - Horizontal CNC lathe - Semi-enclosed machining area - Hydraulic power chuck - 6-station hydraulic indexing turret - CNC-controlled longitudinal and cross axes - Electrical control cabinet - Hydraulic unit - Coolant enclosure Application: - CNC turning - Facing - Boring - Thread cutting - Precision machining of rotational components Construction: - Heavy-duty cast-iron machine bed - Early-generation CNC control system - Automatic turret indexing Dimensions: - Length: Approx. 3200 mm - Width: Approx. 1800 mm - Height: Approx. 2000 mm Weight: Approx. 3800 kg Condition: Used Observed condition: - Machine appears mechanically complete - Hydraulic chuck and 6-station turret installed - CNC electronics and electrical cabinet present - Hydraulic unit installed - Heavy dust accumulation and long-term stor ...
General Description Universal horizontal centre lathe manufactured by TOS, model E3N. Designed for precision turning, facing, boring, drilling and threading of cylindrical metal workpieces in toolrooms, maintenance workshops and general machining applications. Technical Details Manufacturer: TOS Model: E3N Machine type: Universal horizontal centre lathe 3-jaw self-centering chuck installed Tailstock Four-way toolpost Leadscrew Quick-change threading gearbox Flexible coolant nozzle Condition Used industrial condition. The machine appears complete with chuck, tailstock, four-way toolpost, leadscrew, quick-change gearbox and coolant system. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-33
Doosan Lynx 220A CNC Lathe – 2 X/Z Axis – Year 2007 DOOSAN Infracore Co., Ltd. CNC lathe LYNX 220A, manufactured in South Korea in July 2007. This used machine is configured in 2 X and Z axes and equipped with a tool turret. It is suitable for CNC turning operations, general mechanics, and CNC machine tool part production. Sales category: CNC lathe/CNC lathe. Technical data checked: X-axis stroke: 175 mm; Z-axis stroke: 330 mm; maximum spindle speed: 6,000 rpm; power supply: AC 200/220 V, three-phase 3Ø, PE, 50/60 Hz; rated capacity: 23.68 kVA; maximum load indicated on the manufacturer's plate: 11.0 kW; full load current: 62.15 A; breaking current: 17000 A. Machine identification: manufacturer DOOSAN Infracore Co., Ltd.; model LYNX 220A; serial number L2202101; year 2007; manufacturer marking \"MADE IN KOREA\". Connection diagram reference: L22H01CA01. The machine has a full fairin ...
AC power supply 220 V, 3PH, 50/60 Hz; control voltage AC 110 V / DC 24 V; rated current 75 A; installed power 35 kVA; spindle speed up to 6000 rpm; spindle nose ASA A2#5; spindle passage 53 mm; turret 12 VDI tools; tool dimensions 25 x 25 mm; boring bar Ø 40 mm; strokes X 242 mm / Z 440 mm; fast feeds X 20 m/min, Z 25 m/min; spindle motor 11 kW; axle motors X 1.4 kW / Z 2.8 kW; lubricating tank capacity 100 L; Max turning Ø 350 mm; Max turning length 425 mm Auction-ID: A1-50714-4033
CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AAMax. turning diameter: 165 mmTurning length: 100 – 340 mmDiameter above bed: 220 mmMain spindle speed: 50 – 5,000 rpmMain spindle power: 5.5 / 7.5 kWMain spindle bar passing: 65 mmSub-spindle speed: 50 – 5,000 rpmSub-spindle power: 3.7 / 5.5 kWSub-spindle bar passage: 42 mmC-axis: 0.001° Turrets: 2Tool positions: 2 × 16Motorized tools: 2 × 16 positionsStrokes: X 175 mm / Z 240 – 680 mmTotal power: 41 kVADimensions (mm): 3,500 × 2,800 × 2,000Weight (kg): 5,500 Auction-ID: A1-50714-4045
CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AAMax. turning diameter: 165 mmTurning length: 100 – 340 mmDiameter above bed: 220 mmMain spindle speed: 50 – 5,000 rpmMain spindle power: 5.5 / 7.5 kWMain spindle bar passing: 65 mmSub-spindle speed: 50 – 5,000 rpmSub-spindle power: 3.7 / 5.5 kWSub-spindle bar passage: 42 mmC-axis: 0.001° Turrets: 2Tool positions: 2 × 16Motorized tools: 2 × 16 positionsStrokes: X 175 mm / Z 240 – 680 mmTotal power: 41 kVADimensions (mm): 3,500 × 2,800 × 2,000Weight (kg): 5,500 Auction-ID: A1-50714-4043
HITACHI SEIKI - HiTec-Turn HT 20 RIII Stock number 1039-9425 Country of origin Germany Technical details: Turning diameter 450 mm Turning length 380 mm Seico 40L Multi Control Max. machining diameter 340 mm Bar passage 51 mm Speed range - spindle 30 ~ 5,000 rpm Drive power - spindle motor 11 / 7.5 kW Spindle nose A2-6 Spindle bore 59 mm Bearing diameter 100 mm Travel - x 215 mm Travel - z 400 mm Turret head (x-fold) 16 Feed rate 0.001 ~ 500 mm/min Rapid traverse X/Z: 30 m/min Shaft diameter 25 x 25 mm Shaft diameter of the drills 40 mm Tailstock: Tailstock mount MK 5 Tailstock Shift 300 mm Total power requirement 23 kVA Space requirements approx. 5.5 x 2.8 x 2.2 m Accessories: Documentation Chip conveyor Tailstock Signal Lamp Parts removal Tool measuring arm Workspace lighting Tool holder (turret) Auction-ID: A7-50708-20
GILDEMEISTER - CTX 310 V3 Stock number 1039-9126 CNC Turning and Milling Center Manufacturer: GILDEMEISTER Type CTX 310 V3 Year of construction 2003 Control 840 D Siemens Country of origin Italy Additional information: - Incl. 2x reducing tubes Technical details: Turning diameter 210 mm Turning length 580 mm Control 840 D Siemens Center height 190 mm Turning diameter over bed 330 mm Turning diameter above the face slide 260 mm Main spindle: Speed range - main spindle max. 4,000 rpm/-1 Drive power - main spindle 10 / 7.5 kW Max. torque 115 / 86 Nm Spindle bore 68.5 mm Usable rod diameter 51 mm C - Axis 0.001 ° Travels: Travel - x 185 mm Travel - z 455 mm Tool turret: Number of tool positions 12 pos. Tool holder VDI 30 Driven tool stations: 6 pos. Tailstock: Tailstock displacement 400 mm Suction pressure max. 4,000 N Feeds: Rapid traverse X: 20 / Z: 30 m/min Feed force ...
GILDEMEISTER - Sprint 20-8 linear Technical details: Turning diameter max. 20 mm Turning length max. 80 mm Control Fanuc 310is Main spindle: max. usable rod diameter 20 (25) mm Inner drawbar diameter 28.5 mm Max. speed main spindle 10,000 min/-1 Drive power - main spindle 3.7 kW Max. torque 9.4 Nm C-axis C1: 360° Sub-spindle: Inner drawbar diameter 28.5 mm Max. speed main spindle 10,000 min/-1 Drive power - main spindle 3.7 kW Max. torque 9.4 Nm C-axis C2: 360° Travels: x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm Tool carrier slide 1: Number of tool positions 17 pos. Collet Diameter ESX / ER 16 Speed driven tools 3x 3,450 / 2x 6,000 min/-1 Drive power - operated Tool stations 5x 0.98 kW Max. torque 3x 4 / 2x 2.3 Nm Tool carrier slide 2: Number of tool positions 13 pos. Interior Machining 4 Exterior machining 4 powered stations 5 pos Shaft diamet ...
turning diameter: 320 mmturning length: 305 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 3500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 4000 mmturning diameter over slide rest: 3500 mmturning length: 30000 mmcentre height: 2000 mmworkpiece weight: 160 tbed width: - mmbed height over floor: - spindle turning speed range: 0,5 - 80 U/minmain drive motor: - kWfaceplate diameter: - mmControl: Siemens 840D total power requirement: - kVAweight of the machine ca.: 160 t2006 modernized/Overhauled and equipped with:- 4-guides bedway- CNC Control Siemens 840D- Face Plate- Counter StayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 385 mmmax. turning diameter: 620 mmturning length: 958 mmcontrol: MSD 501 II Mori Seikigreates pass round over bed: 710 mmSwing dia. over traverse guideway: 738 mmcentre distance: 1.125 mmMain spindle:: turning speed range - main spindle: 10 - 1.600 min/-1power capacity - main spindel: 30 / 22 kWspindle bearing diameter: 180 mmspindle bore: 130 mmspindle nose: JIS A2-11 axis stroke:: x-axis: 345 (310+35) mmz-axis: 995 mmturret:: number of toolpositions: 12 pos.Shank height for square tool: 32 mmDrill shank diameter: max. 60 mmturret change time: 0,4 sec.Tailstock:: tailstock adjustment: 850 mmdia. of quill: 110 mmtaper of center: MK 5 quill stroke: 150 mmfeeds:: rapid traverse: X: 20 / Z: 24 m/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 64 kVAweight of the machine ca.: 11,5 tdimensions of the machine ca.: 5,0 x 2,5 x 2,5 mDocuments: Chip conveyor: Tail ...
turning diameter: 620 mmturning length: 2000 mmcontrol: MSX 501 total power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 510 mmturning diameter over slide rest: 310 mmcentre distance: 2000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mturning length: mm3-jaw chuck (diameter 250mm)tool holder devicetail stock 3x steady restTechnische Daten / technical details:Spitzenweite / center to center 2000 mmUmlaufdurchmesser über Bett / rotary diameter over bed 510 mmUmlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mmSpindelbohrung / spindle hole 52 mmDrehzahlbereich / spindle speed 44-2240 UpM /rpmGewicht der Maschine ca. / weight ca. 2500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2500 mmswing diameter: 3300 mmturning height: 2200 mmworkpiece weight: 15000 kgvertical adjustment of the crossrail: 1600 mmturning speed range - faceplate: 1 - 90 U/minmain drive motor: 60 kWram head swiveling: +/- 35 °ram head - cross travel: 1200 mmram head - vertical travel: 720 mmfeed range: 1 - 3000 mm/minControl: FANUC 0i-TF total power requirement: ca 70 kWweight of the machine ca.: 41 tdimensions of the machine ca.: 4,8 x 4,8 x 5 mComplete overhaul in 2026- CNC FANUC 0i-TF- 1 ram on crossbeam- 4 clamping jaws for face plate- CE-- mechanical overhaul of all components (adjustment of the geometricalparameters of the machine according to ISO 3655)-- Grinding of the guides-- New telescopic covers-- FANUC main motor-- new electrics and CNC control-- new Fanuc servomotors-- ball screws dia. 50mm-- new hydraulicsThe data for this ad was created with ModulMWS - the ...
faceplate diameter: 5000 mmswing diameter: 8000 mmturning height: 4000 mmram head dimension: 360 x 360 mmfaceplate turning speed range: 0,6 - 60 U/minworkpiece weight: 160 tmain drive motor: 2x 70 kWcontrol: FANUC total power requirement: - kWweight of the machine ca.: 85 tdimensions of the machine ca.: -- mThe machine will be overhauled and modernised (upon order) and fitted with:- Fanuc CNC control system (latest model)- New electrical system- New hydraulic components: pumps, lubrication systems, hoses, valves, etc.- All assemblies and sub-assemblies will be cleaned, inspected and replaced where necessary.- 2 rams supports on the crossbeamCROSS-RAIL TOOL HEAD (ARM TOOL CARRIAGE)- Axial ram travel (Ram stroke) — 2500 mm- Horizontal carriage travel — 3400 mm- Swivel angle / Tiltability — 15 - 45°- Cross-rail travel (Arm travel) — 3600 mm- Saddle travel — 6500 mmSIDE TOOL HEAD- ...
faceplate diameter: 4000 mmswing diameter: 4300 mmturning height: 2060 mmworkpiece weight max.: 18000 kgfaceplate turning speed range -stepless-: 1,02 - 92 U/minrapid traverse of cross-rail: 2500 mm/minslide adjustment: 2400 mmmain drive motor: 60 kWControl: Fanuc 0iTF total power requirement: 75 kWweight of the machine ca.: 62,8 tdimensions of the machine ca.: 6,6 x 5,8 x 5,4 mOverhauled/modernized in 2026- Complete replace of hydraulic & lubrication installation- New ball screws installed- Replace of electric installation and of command- Mechanical elements retrofitted and grinding of guideways(adjustment of the geometrical parameters of the machine according to ISO 3655)equipped with:- CNC control FANUC 0iTF- FANUC Drives and MotorsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
700 € 
