Fabricante:
(Categoria: 102)
Working space: Max. swing diameter: 300 mm Max. turning diameter: 160 mm Max. turning length: 250 mm Main spindle: Speed range: 60 – 6,000 rpm Main drive power: 5.5 KW Spindle nose: A2 – 5 inches Spindle bore: 50 mm Bar work up to a diameter of max. 40 mm Tool turret: Special version: 12-speed Travels: Turret travel: x – axis: 100 mm z – axis: 290 mm Travel speed: Rapid traverse: x/z – axis: 30 m/min Feed range: 0 – 5,000 mm/min Tailstock: Tailstock travel: 364 mm Quill tip: MK 4 Quill stroke: 75 mm Auction-ID: A7-45768-10
turning diameter: 570 mmturning length: 2000 mmcontrol: Heidenhain turning diameter over bed slide: 340 spindle turning speed range: 1 - 2500 U/mintotal power requirement: kWweight of the machine ca.: 3,6 tdimensions of the machine ca.: mFeatures:2 steady restsManual chuck with jawsTool holder with insertsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 47390 €: 905.15 €: 1 : 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 21 : 20 - 2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7.5 kW: 3600 mm: 1250 mm: 1400 mm: 3110 kgdriven by conventional gearbox3-axes digital readout Fagor 40iquick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round)3-jaw chuck Bison3204/DIN6350, Ø 250 mmspindle dead centerfour way rapid traverse deviceelectromagnetic brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS (PRICES ON ...
MAHO MH 500 E2 CNC universal milling machine with dialog control Manufacturer: MAHO AG, Pfronten (Germany) Model: MH 500 E2 Serial Number: 53855 Control: Philips / Heidenhain Dialog (older version) Design: Vertical milling machine with cross table Cladding: Machine enclosure with front door, plexiglass Table size: approx. 700 x 400 mm (estimated) Travels: X/Y/Z estimated approx. 500 x 350 x 400 mm Spindle holder: ISO/SK40 (common for this type) Connection: 3 x 400 V, coolant connection available Condition: • Used, functionally complete • Screen, emergency stop, controls available • Control not tested • Spindle & table mechanically complete Auction-ID: 038-WFW-5
Spindle diameter 255 mm SMW autoblok 250 BB 12-place motorized turret tailstock and bezel Auction-ID: A7-44885-38
maximum spindle rotation speed 3500 RPM control Takisawa TURN-i FANUC Kitagawa B212 chuck, diameter 300 mm 10-place tool turret tailstock Auction-ID: A7-44885-39
Center height 165 mm, center width 635 mm, spindle bore approx. 40 mm, power 2.2 kW Auction-ID: A1-45714-32
Complete with counter spindle, motorized turret, Y axis, chip conveyor, manuals present Auction-ID: A7-44885-31
Top High-Performance Magic Bar Loader Automations Technical features: Bar Diameter Capacity: from 8 mm to 100 mm (depending on the specific version of the cylinder head) Bar length about 1500 Driving System: Self-adjusting half-shell channel (managed by servomotor) Diameter Change: Fully automatic in less than 60 seconds via CNC keypad Bar retraction: Managed by bar feeder with integrated lubrication system Feed Speed: Up to 600 mm/sec (adjustable) Compatibility: Interfaceable with any CNC lathe (Fanuc, Mitsubishi, Siemens) Total dimensions: 1,700 x 1,100 mm Spindle Line Height: Adjustable (usually 900 - 1,250 mm) Approximate weight: 1,800 kg Auction-ID: A7-44885-29
Machine description of the Monforts, model KNC 5 1500 Machine description of the Monforts KNC 5 1500 Working range / Arbeitsbereich ▪ Distance between centers / Spitzenweite : 1500 mm ▪ Turning diameter over cross support / Umlaufdurchm. über Shelf Slits: Ø 290 mm ▪ Turning diameter over bed / Circlaufdurchmesser über Bett : Ø 500 mm ▪ Travel of the transverse carriage / Transporting distance of the Planschlittens : 265 mm ▪ Bed width / Bed width : 360 mm Spindle head / Spindle stock ▪ Spindle diameter in the front bearing / Spindle diameter. am progressing Bearing : Ø 100 mm ▪ Spindle mount / Spindle depth nach : DIN 55027 Size 8 ▪ Spindle drilling 71 mm ▪ Inner cone of the spindle metric 80 Hauptantrieb ▪ Stufenlos adjustable current flow system (100%/40% ED) 11/16.5 kW ▪ Gesamtdrehzahlbereich 2 – 2,800 min-1 ▪ Getriebestufe I 2 - 280 min-1 ▪ Getrieb ...
Weisser Heilbronn \"Senior\" Machine Type: Lead & Pull Spindle Lathe / Precision Lathe Manufacturer: Weisser Maschinenfabrik GmbH, Heilbronn, Germany Model No.: Senior Year of Make: 1974 Type: Conventional universal lathe Supply: Operating voltage: 380 V / 50 Hz Control voltage: 220 V Rated current: 32.5 A Main fuse: 50 A slow blow Bed: Solid cast iron bed, hardened and ground Center width: approx. 1500–2000 mm Center height: approx. 220–250 mm Turning diameter over bed: approx. 450–500 mm Turning diameter over support: approx. 250 mm Spindle bore: approx. 50 mm Speed range: 25–2000 rpm (multi-stage transmission) Feeds: Longitudinal and transverse feed via guide and pull spindle Infinitely variable selectable via feed gear Tapping: Metric, imperial, modulus, and diametrical pitch threads Switchable via manual transmission Tailstock: Quill diameter approx. 60 mm Quill path app ...
FANUC control, complete with Cartesian gantry, chip conveyor, manuals present Auction-ID: A7-44885-41
Lathe Schaerer, model UD632 Working shöhe über Flur : 1120 mm Spitzenhöhe über Flachbahn : 320 mm Diameter over Bett : Ø 660 mm Diameter over shelf slits: Ø 450 mm Diameter over shelf length : Ø 420 mm Extension via extension: Ø 710 mm Antriebsleistung : 15 – 22 kW Max. working support weight between the Spitzen without Setzstock: 1500 kg Max. working support weight between the S. with a set stock: 2200 kg Width : 460 mm Arbeitsspindle Spindle head with Zentrier cone: 55022 , gr. 8 Spindle in advance bearing : Ø 120 mm Spindle bohrung, continuous : Ø 72 mm Vorn Cone 1:20 : 80 mm Inner cone : Morse 5 Drehzahlen : 1,8 – 2240 rpm Details: Machine is in very neat condition Double prism underlying bed, so very accurate Digital readout HEIDENHAIN , model ND 780 Infinitely adjustable speed! Forkardt chuck Ø 400 mm Automatic lubrication system Automatic chisel support R ...
Equipped with various turning parts, spindles, and clamps for lathes Auction-ID: A1-41992-79
A deposit of €1500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Bar Diameter 80 2 mm Max size of tools for external use 25 mm Max internal tool size 40 mm Travel X axis 225 (220+5) mm Z axis travel 1125 (1120+5) mm Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-1
Motorized turret, self-centering collet holder, tailstock, manuals present Auction-ID: A7-44885-32
X1 axis travel = 230 mm Z1 axis travel = 680 mm X2 axis travel = 205 mm Z2 axis travel = 498 mm Y-axis travel = +40/0/-40 mm Maximum turning diameter with upper turret 295 mm Maximum turning diameter with lower turret 390 mm Maximum permissible cylindrical workpiece size Ø250 x 800 mm 3-jaw chuck Ø210 mm, bar capacity 65 mm 3-jaw self-centering counter-spindle Ø210 mm, bar capacity 52 mm Upper and lower turret VDI40 - 12+12 seats Auction-ID: A7-44984-10
: neu : Bulgarien : 40850 €: 780.24 €: 400 mm: 750 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 4 : 18-98, 48-265, 144-790, 3 U/Min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 7.5 kW: 1530 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 41.580,-The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...
: neu : Bulgarien : 133520 €: 2523.53 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 118 670,00 turning length4.000 mm € 141 700,00 turni ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 131720 €: 2489.51 €: 1020 mm: 2000 mm: 510 mm: 358 mm: 770 mm: 560 mm: 361 MK: 12 : 6,3 - 315 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 505 mm: 270 mm: 105 mm: 6 MK: 225 mm: 18,5 kW: 6400 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type D1, system like Mult ...
turning diameter over bed: 1420 mmturning diameter over slide rest: 1000 mmturning length: 15000 mmturning dia. in gap: 2050 mmspindle diameter: 160 mmspeed: 1 - 400 U/minfaceplate diameter: mmspindle motor: 30 kWtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 4-jaw face plate- 4 Steady rest- 4-way toolpost- Rapid traverse- tailstock- Taper turning attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Graziano SAG180 Lathe Type: Lathe Manufacturer: Graziano Model: SAG180 Year of manufacture: 1987 Turning length: 1500 mm Turning Ø: 450 mm Speed range: up to 1500 rpm Engine power: 7.5 kW Electric connection: 380 V Distance between centers: up to 1500 mm, allowing work on medium-length parts Approx. machine weight: 1700 kg Approx. dimensions (L x W x H): 2800 x 1300 x 1400 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-32
Collection by Appointment Only. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45162-5
: neu : Bulgarien : 55100 €: 1041.39 €: 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 3 : 20 - 100, 80 - 400, 400 - U/Min: 120 : 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3600 mm: 1500 mm: 1650 mm: 3110 kgIn contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.driven by variable speed control (3 steps)3-axes digital readout Fagor with CSS (constant surface speed)quick change toolp ...
Swing over bed: 500 mm Swing over carriage: 280 mm Distance between centers: 1,500 mm Auction-ID: A1-45225-37
24-position tool changer HAAS HRT310 Rotary Table - 4 Axis Table diameter: 310 mm Bore diameter: 82 mm RENISHAW 40-2 Probe With accessories Assorted quantities and types, as shown in the photo. The total availability of individual visible elements is not guaranteed. Auction-ID: A7-45181-30
max. workpiece diameter: 40 mmthreading length: 300 mmpressure: 2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2.000 € 
