Fabricante:
(Categoria: 106)
: neu : ca. 10 Wochen ab Auftrags : Türkei : 8300 €: 160.19 €: 1 : 100 to: horizontal verschiebbar : 300 mm: 1070 mm: 5 mm/s: 10 mm/s: 2110 mm: 1000 mm: 2430 mm: 1500 kgdemo machine / mint conditionnet price (price for new machine € 9.000,00)horizontally displaceable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Not tested; Auction-ID: A7-43908-115
Not tested; Auction-ID: A7-43908-246
Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-43970-224
Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-43970-176
Manufacturer: Carl Müller Maschinenfabrik Manufacturer's location: Solingen-Kotten, Germany Machine Type: Mechanical Eccentric Press / Stamping & Forming Press Model: EPS Year of Make: 1967 Design & Area of Application • Stationary C-frame press in solid cast design • Application: Metal processing, industry, workshops, series and small series production • Typical applications: stamping, punching, cutting, bending, embossing and simple forming work Drive • Mechanical drive via electric motor • Power transmission by means of flywheel and eccentric mechanism • High repeatability with constant stroke movement Pressing force • Nominal pressing force: approx. 16 tons • Maximum pressing force: approx. 20 tons Pestle • Slide stroke: approx. 10–70 mm • Adjustability of the plunger: approx. 45 mm • Vertically guided press ram for precise power transmission Frame • R ...
Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-43971-224
hydraulic press. With hydraulic power unit, 380/420 V. 50 Hz. 22A. 1450 rpm. Auction-ID: A7-43477-5
manual pendulum press/forging press 28T Auction-ID: A1-42356-21
Upgrading of the electrical system carried out in 2019. Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Quadro dimensions: 1400 x 500 x 2400 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-44316-728
Auction-ID: A7-43697-4
Redevelopment of the electrical system carried out in 2017. Press table dimensions: 530 × 540 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-44316-723
Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-43970-136
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-44316-726
As good as new machine Operating hours in motion: 29.5 Hour meter: 2244 Strokes: 159328 incl. interchangeable decoiling device, strip straightener and Scrap ejection. Mains voltage: 3LNPE/400V/50Hz Control: Beckhoff/PNOZ multi Electrical wiring diagram: E$-M02070 Pre-fuse: 160 A Nominal power: 37 KW Nominal force: 2000 KN Working capacity: 16000 J Stroke rate in continuous stroke: 30-150 min-1 Max. stroke rate in single stroke: 30 min-1 Max. clutch cycles in single stroke: 20 per min Runtime: 0.158 s Min. safety distance: 317 mm Clutch pressure: 5.0 bar System pressure: 6.0 bar Stroke length: 20-220 mm Max. plunger adjustment: 150 mm Usual stopping point of the ram: OU Table dimensions: 1800x1100 Plunger dimension, max. tool dimension (WxD): 1800x1100 mm Max. weight tool top: 1700 kg Mass without additional equipment: 29000 kg Auction-ID: A7-43697-7
Sold with letter presage kit. Auction-ID: A1-43691-85
Sold with 3 tool cabinets (2 x 50/100/190 cm and 1 x 90/100/190 cm) with contents. Auction-ID: A1-43691-189
Upgrading of the electrical system carried out in the 90s by BRUDERER. Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Dimensions of the Painting: 600 x 700 x 2400 approx. mm Capacity: 25 Ton Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-44316-731
To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-7
Raster 50 Hydraulic Press Machine Type: Hydraulic Press / Deep Drawing & Forming Press Manufacturer: Raster GmbH, Germany Model: Raster 50 Pressing force: 50 tons Drive type: Hydraulic with continuously variable PIV transmission (W. Reimers KG, Homburg) Construction: Compact, closed steel frame with high rigidity Drive motor: approx. 4–7.5 kW Operating voltage: 400 V / 50 Hz Control: Electric control panel with two-hand safety control Time and pressure regulators for precise control of the pressing process Pressure display and hour meter integrated Hydraulic: Hydraulic power unit with oil cooler and filter system Oil level indicator with sight glass Pressure relief valve for system protection Recommended hydraulic oils: Renolin MR15, Energol GR XP, Mobilgear 626 Specifications: Operating pressure: up to 250 bar Stroke: approx. 200–300 mm Installation height: approx. 500–600 mm ...
Pressure kg/cm2º 185 kg To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-9
Serial number: 2066. Manual control lever Dual analog pressure gauges. Capacity: 60,000 lbs. Compression press manufactured by Louis Small. Designed for material strength testing or sample failure analysis in laboratory or quality control environments. Safety protection for the test area. Auction-ID: A7-43820-10
pressure: 1000 tdistance between columns: 4150 mmstroke: 1200 mmdistance table/blankh.,max. stroke up,adjustm. up: 2100 mmtable surface area: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 300 mmdie-cushion pressure in pusher: 100 tstroke of drawing cushion in pusher: 150 mmram surface: 4000 x 2200 mmcolumn travel -side: 1300 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic Control: Siemens S7 height over floor: 7,7 mtotal power requirement: 300 kWweight of the machine ca.: 280 tdimensions of the machine ca.: 5,75 x 4,3 x 9,55 mYear of construction 1973Modernization 2005with oil-hydraulic drive, hydraulically controlled drawing cushion in the table andRam, hydraulic cutting impact dampingstored dismantled - short video available from the seller before dismantli ...
pressure: 4000 kNtable length: 2500 mmtable width: 2000 mmdayligth: 2500 mmstroke: 2600 mmtank capacity: 1000 ltotal power requirement: 56 kVAweight of the machine ca.: 85 tdimensions of the machine ca.: 9,2 x 3,1 x 8,2 mintegrated wax-injection unit with 0-5 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HESSE+CO GesmbH
300 € 