Fabricante:
(Categoria: 101)
travel -x axis: 1.000 mmtravel -y axis: 510 mmtravel -z axis: 480 mmtravel of - x axis (rotary-tilting table): 420 mmtravel - x axis (fixed machine table): 450 mmcontrol: HEIDENHAIN iTNC 530 turning speed range: 50 - 12.000 U/minnumbers of positions in the tool changer: 20 tool taper: SK40 table surface area: 650 x 510 mmworkpiece weight: 300 kgClamping surface of rotary-tilting table: 420 mmworkpiece weight: 200 kgspeeds of rotary table: 30 U/min5-axis machining center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, ITC, zero-point clamping system and chip conveyor. In addition, the machine features a full enclosure and an extraction system with filter unit.With only 9,787 spindle hours, the unit shows low operating time.The machine is in a well-maintained condition and can be inspected at any time under power.A machine video can be provided on request.Please refe ...
x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmtable surface area: 790 x 560 mmspindle taper: SK 40 spindle turning speed - stepless: 20 - 12.000 U/minspindle drive: 13 kWmax. torque on the spindle: 83 Nmfeeds x/y/z -stepless: bis 20.000 mm/minrapid traverse: 30 m/minATC: 20 Pos.tool diameter if 2 vacant positions: 130 mmtool diametre at full load: 80 mmtool length - max.: 300 mmweight of tools max.: 6 kginternal coolant system feed: 12 barcontrol: HEIDENHAIN, TNC 620 total power requirement: 17 kVAweight of the machine ca.: 3,9 tdimensions of machine L x W x H: 3,0 x 1,92 x 2,35 mAccessories: probe HEIDENHAIN, TS 460, electron. hand panel, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mmy-travel: 600 mmz-travel: 510 mmtotal power requirement: 30 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4400 x 2250 x 2920 mmWorking area:X-axis travel: 1100 mmY-axis travel: 600 mmZ-axis travel: 510 mmRapid traverse: 32 m/minWorktable: 1300 x 600 mmT-slots: 6, size 18, 100 mm spacingMax. table load: 1000 kgDistance from column to spindle center: 600 mmSpindle: 60 - 12000 rpmDrive power: 10/17 kWSpindle taper: ISO 40 / DIN 69871AMagazine: 32 positionsMax. tool weight 8 kgMax. tool length 300 mmMax. tool diameter 76/127 mmTool change time 2.5 secSpace requirements:Length x Width x Height 4400 x 2250 x 2920 mmWeight 8500 kgEquipment and accessories:Heidehain iTNC 530 CNC controlInternal coolant system (IKZ): 20 barCoolant tank: 480 lChip conveyorHeidenhain glass scales in X/Y/ZThe data for this ad was created with ModulMWS - the software solution of Lo ...
x-travel: 2800 mmy-travel: 2200 mmz-travel: 800 mmControl: Heidenhain iTNC 530 table surface area: 3000 x 1200 mmtool taper: HSK-A-63 spindle turning speed range: 12000 U/minpower capacity: 18 kWfeed range: 35000 mm/mintotal power requirement: 68,7 kWweight of the machine ca.: tdimensions of the machine ca.: 12,4 x 3,5 x 4,6 mThe FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components.With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing.Heidenhain iTNC 530 CNC path controlNumber of controlled axes (simultaneously): X/Y/Z/C/BTravels:X-axis (longitudinal travel) 2800 mmY-axis (cross travel) 2200 mmZ-axis (vertical travel) 800 mmMachine length: 12,434 mmMachine width: 3,597 mmMachine height: 4,622 mmCoolant equipment (no coolant through spindle)C ...
spindle diameter: 160 mmx-travel: 10500 mmy-travel: 4000 mmspindle taper: ISO 50 z-travel: 950 mmturning speeds: 3,15-1000 U/mintransmission ratio: 4 spindle power: 58 kWSupport sleeve: 340x400 mmw-travel: 900 mmFeed: x 0,12-9600 mm/UFeed: y/z/w 0,1-5600 mm/UPlate area: 39,5 m²Plate: 5400x3500 mmPlate: 5900x3500 mmT-slot - distance: 365 mmT-slots: 35/75 mmThickness of the plate: 360 Control: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, p ...
x-travel: 1270 mmy-travel: 670 mmz-travel: 625 mmCNC-control: SIEMENS 828 D table-size: 1300 x 670 mmmax. table load: 1000 kgspindle taper ISO: SK 40 spindle turning speed range: 12000 U/minfeed stepless: 8000 mm/minrapid traverse: 36 / 36 / 30 m/mindrive capacity - spindle motor: 18,5 kWtool change unit: 30 Pos.total power requirement: 40 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3,20 x 2,45 x 2,40 mchip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m- Siemens 828D CNC control- Direct drive spindle: 12,000 rpm- Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper)- Oil cooling of the spindle head- Thermal compensation system (software)- Tool magazine: 30 tools- RENISHAW tool and workpiece probe- Internal cooling via the spindle centre: 12 bar- External cooling with air and cooling lubricant- Internal thread spindles + chip conveyor b ...
arm length: 1600 mmtool adaptor: ja fabric-no.: 9787 weight: 4,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 150 mmx-travel: 9000 mmy-travel: 5000 mmControl: FANUC 31i-B spindle taper ISO: 50 dimension of the ram: 400 x 400 mmz-travel: 1200 mmw-axis: 1000 mmnumber of spindle speeds: 1 - 3000 U/minmain drive motor: 71 kWrotary table:: table surface area: 2500 x 3000 mmtable load: 30 tV-axis: 2500 mmb-axis: 0,0001 / 360 °feeds x/y/z -stepless: 0,5 -20000 / 15000 mm/mintotal power requirement: - kVAweight of the machine ca.: - tEquipped with:- FANUC 31i-B CNC control- 2-axis milling head 0-360° / +/- 95°- 60-position tool changer (ISO 50)- Skoda TDV 30 NC boring mill table (2500 x 3000 mm, 30 t)- Coolant system with paper belt filter- Hydrostatic guides on all axes- Tool management- Renishaw RMP 60 workpiece measurement- AAC station for 4+1 heads-- IFW 12 C-E angle milling head, 1° head rotation, external cooling, 25kW, 3000rpm-- IFVW 101 C-E angle milling head, 1° head rot ...
spindle diameter: 150 mmx-travel: 14000 mmy-travel: 5000 mmControl: FANUC 31i-B spindle taper ISO: 50 dimension of the ram: 400 x 400 mmz-travel: 1200 mmw-axis: 1000 mmnumber of spindle speeds: 1 - 3000 U/minmain drive motor: 71 kWrotary table:: 2 Stcktable surface area: 4000 x 4000 mmtable load: 70 tV-axis: 2500 mmb-axis: 0,0001 / 360 °feeds x/y/z -stepless: 0,5 -20000 / 15000 mm/mintotal power requirement: - kVAweight of the machine ca.: - tEquipped with:- FANUC 31i-B CNC control- 2-axis milling head 0-360° / +/- 95°- 60-position tool changer (ISO 50)- 2x pcs Skoda TDV 70L NC boring mill table (4000 x 4000 mm, 70t)- Coolant system with paper belt filter- Hydrostatic guides on all axes- Tool management- Renishaw RMP 60 workpiece measurement- AAC station for 4+1 heads-- IFW 12 C-E angle milling head, 1° head rotation, external cooling, 25kW,3000rpm-- IFVW 101 C-E angle milling head, ...
x-travel: 3.400 mmy-travel: 3.400 mmz-travel: 1.600 mmControl: CELOS 840D sl Op SiemensMain spindle:: max. spindle speed: 20 - 15.000 min/-1power capacity - main spindel: 52 / 42 kWtool taper: HSK-A100 max. Torque: 404 / 280 Nmswivellable: B: -30° / +180 °NC-Rotary table:: table diameter: 2.500 x 2.000 mmmax. table load: 10.000 kgtable speed: 5 min/-1distance spindle center to table: hor.: 130 - 1.730 mmdistance spindle center to table: vert.: 230 - 1.830 mmdistance spindle nose and table: hor.: -1.500 - 1.900 mmdistance spindle nose and table: vert.: -1.600 - 1.800 mmTool-Presetter:: type: 5x Rad- / Wheel number of toolpositions: 303 pos.max. tool diameter: 110 mmmax. tool-dia with free toolbox: 280 mmmax. tool length: 900 mmmax. tool weight: 45 kgtool changing time: 7,5 sectool taper: HSK-A100 feeds:: rapid traverse: 60 / 30 / 40 m/mintotal power requirement: 140 kVAweight of the ...
x-travel: 4500 mmy-travel: 800 mmz-travel: 600 mmcontrol: HEIDENHAIN iTNC 530rapid traverse: 30/40/40 m/mintable surface area: 5300 x 750 mmtable load: 4,5 ttool taper: DIN 69871-A40 turning speeds: 30 - 6000 U/minspindle motor: 29 kWspindle distance: 325 - 925 mmtool piece magazine with: 30 Plätzentotal power requirement: kWweight of the machine ca.: ca. 20 tdimensions of the machine ca.: mequipped with:- CNC-Control Heidenhain iTNC 530- IKZ 20 bar- NC Swivable Table- Chip Conveyor- Coolant- Tool Changer 30-fold (SK 40)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 730 mmy-travel: 850 mmz-travel: 560 mmcontrol: Mazatrol Matrix Main spindle:: turning speed range - main spindle: 35 - 10.000 min/-1power capacity - main spindel: 30 / 22 kWtool taper: SK 50 Tool changer: 30 pos.size of pallet: 630 x 500 mmworkpiece weight max.: 500 kgA-Axis: -120 ~ +30 °C-Axis: 360 °rapid traverse ( X / Y / Z ): 42 m/mintotal power requirement: 64 kVAweight of the machine ca.: 19 tdimensions of the machine ca.: 5,5 x 2,69 x 3,5 m5-axis simultaneous machining centre:- 5-axis CNC control Mazatrol Matrix & handwheel- NC Rotary Table swivable- 30-fold tool changer (SK 50)- IKZ 20 bar- Chip conveyor- Renishaw RMP 600Operating/switch-on hours:The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 385 mmbore stroke: 200 mmspindle taper MT: 4 turning speed range: 61-1169 U/mintable:: 470 x 560 mmtotal power requirement: - kWweight of the machine ca.: 700 kgdimensions of the machine ca.: 900x800x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -x axis: 1.200 mmtravel -y axis: 900 mmtravel -z axis: 500 mmcontrol: HEIDENHAIN tool taper: SK 40 milling spindle dia. in forward position: 70 mmtable surface area: 1.400 x 900 mmMilling machining centers - vertical | HERMLE - C 1200 V equipped with tool changer.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C1200 V | C-1200 V | C 1200-V | C1200VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1.050 mmy-travel: 610 mmz-travel: 610 mmcontrol: HEIDENHAIN iTNC 530 Distance between table and spindle: 100-710 mmtable-size: 1.200 x 600 mmtable weight: 1.200 Kgrapid travel x/y/z: 30.000/20.000 mm/minfeed: 12.000 m/minspindle taper: BT-40 spindle turning speed range: 60 - 10.000 U/minspindle drive: 7,5/11 kWTools changer: 20 pos.Internal cooling system: 20 barChip coveyor: 2 handwheel: HEIDENHAIN HR-410 tool diameter: 100 mmtool length - max.: 320 mmweight of tools max.: 10 kgtotal power requirement: kWweight of the machine ca.: 7 tdimensions of the machine ca.: 2.900 x 3.420 x 2.888 mComplete installation 4th axis - Rotary table Golden Sun CNCT 321 (4th/5th axis)- Rotary table diameter 200 mm. - Rotary table tailstock - ZF box -Electrical cabinet air conditioningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmthroat: 295 mmbore stroke: 120 mm: 3 speeds: 125 - 3000 U/mintable-size: 300 x 300 mmcolumn diameter: 115 mmtotal power requirement: 0,75 kWweight: 225 kgdimensions: 900 x 600 x 1800 mmEquipment:- V-belt driven pillar drill- Adjustable drilling depth stop- height-adjustable work table with T-slots- drill chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2134 mmy-travel: 1016 mmz-travel: 762 mmCNC-control: HAAS CNC Table dimensions: 2134 x 914 mmmax. table load: 1814 kgspindle taper: SK 50 spindle turning speed range: 7500 U/minspindle motor: 22,4 kWfeed range: 1270 mm/minrapid traverse: 15,2 m/mintool change unit: 30 Pos.coolant: IKZ voltage: 400 Vtotal power requirement: kWweight of the machine ca.: 13,2 tdimensions of the machine ca.: 4,70 x 2,95 x 2,99 mchip conveyor: - Serial No.:1099476- Year of manufacture 11/2012- Through spindle coolant TSC- 5-Axis pivotable rotary table HAAS TR310 (as new condition)PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mmx-travel: 1600 mmy-travel: 1120 mmz-travel: 1250 mmtable surface area: 1250 x 1250 mmspindle taper: ISO 50 spindle turning speed range: 7,1 - 1120 U/minfaceplate turning speed range: 7,1 - 224 U/minfaceplate diameter: 600 mmtable load: 4000 kgmain drive motor: 11 kWmax. travel of spindle: 900 mmtotal power requirement: 15 kVAweight of the machine ca.: 14,5 tdimensions of the machine ca.: 6 x 3,1 x 3,1 mOverhauled/Modernized in 2003- DRo Heidenhain- Faceplate with slideThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mmx-travel: 1600 mmy-travel: 1120 mmz-travel: 1250 mmtable surface area: 1250 x 1250 mmspindle taper: ISO 50 spindle turning speed range: 7,1 - 1120 U/minfaceplate turning speed range: 7,1 - 224 U/minfaceplate diameter: 600 mmtable load: 4000 kgmain drive motor: 11 kWmax. travel of spindle: 900 mmtotal power requirement: 15 kVAweight of the machine ca.: 14,5 tdimensions of the machine ca.: 6 x 3,1 x 3,1 m- DRo Heidenhain - Faceplate with slideThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mmthroat: 300 mmbore stroke: 200 mmspindle taper: MK 4 spindle turning speed range: 55 - 600 U/mintable diameter: 500 mmcolumn diameter: 180 mmfeeds: 0,07/0,11/0,16/0,22 mm/Utotal power requirement: 1,47 / 1,84 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: 1,3 x 0,65 x 2,17 mCondition: ready for operation: Electric 380 Volt: Heavy-duty pillar drill with a 2-speed motor and speed adjustment via a pulley. This machine is available at a special price!Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1016 mmy-travel: 660 mmz-travel: 635 mmcontrol: Haas table surface area: 1.372 x 610 mmtable load: 1.814 kgrapid traverse: 18 m/minturning speed range: 7.500 U/minpower capacity - milling spindle: 22,4 kWtool taper: SK 50 |no. of tools in the magazine: 30 Stückweight of the machine ca.: 7,5 tdimensions: 3,5 x 2,47 x 2,98 mVertical Machining Center with 4th axis- chipconveyor- external handwheel- Dual tool change arm- internal coolant- filter- 4th axis, HRT 210 A- prepared for cableless 3D touch probe- oil dust collector- tool measuringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 610 mmy-travel: 510 mmz-travel: 610 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- ULTIMAX 4 control- toolchanger for 24 tools- coolant through spindle- chip tank- electronical hand wheelTechnische Daten / technical details:Verfahrweg X / X-Travel 610 mmVerfahrweg Y / Y-Travel 510 mmVerfahrweg Z / Z-Travel 610 mmTischgröße / table size 760x510 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 24 fachEilgang / rapid feed 30 m/minGewicht der Maschine ca. / weight 4700 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of L ...
control: FANUC Professional 6 Number of axles: 4 St.x-travel: 900 mmy-travel: 900 mmz-travel: 1020 mmb-axis: 0.001 °size of pallet: 630 x 630 mmtool piece magazine with: 136 milling spindle: HSK100 spindle turning speed - stepless: 10000 U/mintype of pallet-changer: FASTEMS FPC1500 chip conveyor: kWmisc. accessories: weight of the machine ca.: 20 tdimensions of the machine ca.: 10 x 5 x 3.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: FANUC 310 is-A Number of axles: 4 St.x-travel: 730 mmy-travel: 730 mmz-travel: 650 mmb-axis: 0.001 °size of pallet: 500x500 mmtool piece magazine with: 60 milling spindle: HSK63 spindle turning speed - stepless: 50-12000 U/minchip conveyor: kWmisc. accessories: weight of the machine ca.: 10 tdimensions of the machine ca.: 3.0 x 5.0 x 3.0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: FANUC 18i MB Number of axles: 4 St.x-travel: 710 mmy-travel: 610 mmz-travel: 650 mmb-axis: 0.001 °size of pallet: 500x500 mmtool piece magazine with: 60 milling spindle: BT40 spindle turning speed - stepless: 15000 U/minchip conveyor: kWmisc. accessories: weight of the machine ca.: 15 tdimensions of the machine ca.: 5.1 x 3.7 x 3.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 22 mmthroat: 270 mmspindle turning speed - stepless: U/minweight of the machine ca.: 1.1 tdimensions of the machine ca.: 1.2 x 1.2 x 2.2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmcontrol: iTNC 530 HeidenhainNC-Swivle milling head:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 10 / 15 kWmax. Torque: 130 / 87 Nmtool taper: HSK-A63 swivellable: NC: +30 / -120 °work table:: table surface area: 1.000 x 600 mmT-slots: 9x 14 x H7 max. table load: 700 kgtool magazin:: number of toolpositions: 60 pos.tool taper: HSK-A63 total power requirement: 49,7 kVAweight of the machine ca.: ca. 11,0 tdimensions of the machine ca.: 4,5 x 4,5 x 3,5 mDocuments: Chip conveyor: Coolantsystem: high pressure coolant: turning milling head: elektr. hand wheel: Rotary screen: paper band filter: Spray gun: exhaust fan: indexing attachment: EA-733.20 Tailstock: CNC - MachiningCenter UniversalDECKEL MAHO - DMU 60 monoBLOCK- 5 Axis- Swivel-MillingheadThe data for this ad was created with ModulMW ...
STEINHAND GmbH
