Fabricante:
(Categoria: 101)
bore capacity in steel (diameter): 23 mmthroat: 220 mmbore stroke: 120 mmNumber of revolutions: 25 - 3.200 U/mindistance Spindlenose and center of table: 275 mmtable surface area: 300 x 355 mmT-slots: 3x T - slots distance: 120 mmcolumn diameter: 110 mmtotal power requirement: - kWweight of the machine ca.: ca. 120 kgdimensions of the machine ca.: 0,8 x 1,0 x 1,9 mTable Drilling MachineIXION - BT 23 ST- incl. base cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mmthroat: 220 mmbore stroke: 110 mmtaper MK: 3 MKtable-size: 350 rund mmfeeds: mm/Uturning speeds: 100 - 2080 U/minconnected load frequency: 400 Vtotal power requirement: 0,9 KWweight of the machine ca.: 0,2 tdimensions: 0,8 x 0,6 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 51 - 1000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mHigh-speed radial end mill with- Thread cutting attachment- Vertical table 750 x 620 mm- Horizontal table 1200 x 510 mm- Emergency stop device- DocumentationMachine-No. 445The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 / 23 mmthroat: 320 mmbore stroke: 180 mm: 4 speeds: 30 - 765 U/mintable-size: 720 x 550 mmweight: 480 kgdimensions: 750 x 900 x 1900 mmEquipment:- Multi-spindle head, drill Ø 23 mm- automatic feed- coolant device- infinitely variable speed- adjustable drilling depth stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1270 mmy-travel: 508 mmz-travel: 635 mmcontrol: Haas total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1.600 mmy-travel: 1.250 mmz-travel: 1.000 mmsize of pallet: 1.000 x 1.250 mmcontrol: SIN840D power capacity at 40 % load: 38,00 KWspindle turning speed - stepless: 20 - 10.000 U/minpower capacity at 100 % load: 25,00 kWmax. torque at 40% / 100% load: 288 / 187 Nmtool taper: SK50 feed X/Y/Z/-axis: 20 - 15.000 mm/minrapid traverse X/Y/Z: 60,00 m/minB - axis: -150° / +80° x 0,001 °feed B-axis: 3.600 ° / minC-axis: 360 x 0,001 °Rapid motion C- axis: 1 - 3.600 U / min.table load: 3.000 Kgtool magacine with: 240 tool diameter: 110 mmwotkpiece diameter with 2 vacant positions: 250 mmtool length - max.: 650 mmweight of tools max.: 15,00 kgtotal power requirement: 75,00 kWweight of the machine ca.: 55,00 tdimensions of the machine ca.: 12,50 x 8,00 x 4,20 m5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheeloperating mode 4240-position tool magazine 4- ...
x-travel: 1000 mmy-travel: 1000 mmz-travel: 950 mmControl: FANUC Pro-3 feed X/Y/Z/-axis: 1 - 50.000 mm/minrapid traverse X/Y/Z: 50,00 m/mintool taper: HSK-A 100 turning speeds: 20 - 12.000 U/minspindle drive: 25 / 30 kWtorque milling spindle: 420 Nmspindle diameter in front bearing: 110 mmB - axis: 360 x 0,001 °size of pallet: 2x 800 x 800 mmtable load capacity: 1.800 kgdimension of workpiece: 1.000 x 950 mmworkpiece height max.: 1.000 mmtool piece magazine with: 188 tool length - max.: 475 mmtool diameter: 320 mmweight of tools max.: 20,00 kgtotal power requirement: 65,00 kWweight of the machine ca.: 30,00 tdimensions of the machine ca.: 8,00 x 5,30 x H3,50 mHorizontal machining center with FANUC Porfessional 3 control, NC rotary table, el. handwheel, chip conveyor,coolant filter KNOLL VRF 450/2300, through-spindle coolant,188-station tool magazine. New spindle in 2023Machine can be in ...
x-travel: 560 mmy-travel: 510 mmz-travel: 510 mmControl: MSC 502 distance spindle center to table: 50 - 650 mmdistance Spindlenose and center of table: 100 - 610 mmMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 22 / 18,5 kWtool taper: MAS BT-40 spindle bearing diameter: 70 mmpallet changer:: numbers of pallets: 2 size of pallet: 400 x 400 mmmax. workpiecediameter: 580 mmmax. workpiece height: 650 mmb - axis: switching time: 90°: 2,5 secchange time of pallets: 6,0 secTool-Presetter:: number of toolpositions: 60 pos.tool taper: MAS BT-40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 300 mmmax. tool weight: 8 kgchange-time tool to tool: 1,5 secchange-time chip to chip: 3,7 secfeeds:: rapid traverse ( X / Y / Z ): 32 m/minfeed speeds: 1 - 24.000 mm/minTipp feed: 0 - 1.260 mm/mintotal power requirem ...
bore capacity in steel (diameter): . mmarm length: . mmworkpiece height max.: . mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0760 mm: 450 mm: 500 mm: 900x450 mm: BBT 40 : 10.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1100 mm: 650 mm: 610 mm: 1200x6000 mm: BBT 40 : 12.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0550 mm: 410 mm: 480 mm: 650x410 mm: BBT 40 : 10.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmthroat: 295 mmbore stroke: 140 mm: 3 speeds: 160 - 2250 U/mintable-size: 375 x 415 mmtotal power requirement: 1,5 / 1,9 kWweight: 350 kgdimensions: 590 x 500 x 1900 mmEquipment:- Automatic feed- Thread cutting device- coolant device- infinitely variable speed- Adjustable drilling depth stop- EMERGENCY STOP switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmcontrol: Siemens ergoline table surface area: 2x 790 x 560 mmnumber of pallets: 2 rapid traverse: 30 m/minturning speed range: 8000 U/minpower capacity - milling spindle: 13 kWno. of tools in the magazine: 30 Stücktool taper: SK 40 | |weight: 5,2 tdimensions: 3,1 x 2,1 x 2,7 mvertical machining centre wit 2x palettchanger,Equipment:- 2x palettchanger- chipconveyor- internal coolant- filter system- ext. hand wheel- laser tool setter- cableless 3D probe- oil dust collector- Siemens ShopMill dialog programming- Roto Clean- signal lamp- spindle oil coolerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 750 mmy-travel: 500 mmz-travel: 400 mmspindle taper ISO: 40 spindle speed:: 20-8000 1/minrapid travel x/y/z: 25.000 mm/minfeed range: 1-5000 mm/minSize of table plate: 1000 x 500 mmtool change unit: 20 Control: Heidenhain TNC 530 Number of working hours: 25754 htable load: 400 kgworkpiece length: 300 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 2,3 x 2,6 x 2,56 mWEMAS VZ 750 machining centre, 3 axes, 4th axis preparedGood condition, few operating hours, only samples and prototypes, mainlyaluminium.Control system 30,397 hoursMachine 25,754 hoursProgramme run 8,683 hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2025 : 030161 : ca. 2 - 4 Wochen ab Auftr : Deutschland : 7350.17 €: 141.86 €: 1 : 23 mm: MK 2 : 260 mm: 20 - 2000 U/min: 1,5 kW: M16x1 : 430 mm: 715 mm: 1800 mm: 290 kg: manuell mm/U: 110 mm: 230 - 850 mm: 420 x 340 mm: 100 mmDrilling capacity / normal drilling capacity 23/25 (in E335/ST60)Manual feedMain switchGewindeschneideinrichtungControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plugOPTIONS:Drill package 3 (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmcontrol: iTNC 530 HeidenhainMain spindle:: power capacity - main spindel: 13 / 9 kWturning speed range - main spindle: 20 - 10.000 min/-1Torque: 83 / 57 Nmtool taper: SK 40 tension force: 10 kNwork table:: table surface area: 790 x 560 mmnumber of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mmT-slot - distance: 100 mmmax. table load: 600 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgTotal weight, approx.: max. 60 kgfeeds:: feed speeds: max. 20.000 mm/minFeed force: 5 kNinput unit: 0,01 mmrapid traverse: 30 m/mintotal power requirement: 20 kVAweight of the machine ca.: 4,1 tdimensions of the machine ca.: 4,5 x 4,0 x 2,8 mDocuments: Coolantsystem: high pressure coolant: 6 barChip con ...
x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 28 / 19 kWmax. Torque: 121 Nmtool taper: HSK-A 63 swivellable: B: +30° / -120 °NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mmmax. table load: 650 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 2x16 pos.tool taper: HSK-A 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool weight: 8,0 kgmax. tool length: 315 mmfeeds:: feed speeds: max. 30.000 mm/minrapid traverse: 30 m/mintotal power requirement: 48 kVAweight of the machine ca.: 14,0 tdimensions of the machine ca.: 4,5 x 4,0 x 2,6 mDocuments: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: Rotary screen: Signal lamp - 4 colour: 3D quickSE ...
x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 28 / 19 kWmax. Torque: 121 Nmtool taper: HSK-A 63 swivellable: B: +30° / -120 °NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mmmax. table load: 650 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 2x16 pos.tool taper: HSK-A 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool weight: 8,0 kgmax. tool length: 315 mmfeeds:: feed speeds: max. 30.000 mm/minrapid traverse: 30 m/mintotal power requirement: 48 kVAweight of the machine ca.: 14,0 tdimensions of the machine ca.: 4,5 x 4,0 x 2,6 mDocuments: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: 5 Axis CNC - MachiningCenter UniversalDECKEL MAHO - ...
x-travel: 1020 mmy-travel: 510 mmz-travel: 510 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain4. axiselectronical hand wheel20-fold automatic tool changerchip tankTechnische Daten / technical details:Verfahrweg X / X-Travel 1020 mmVerfahrweg Y / Y-Travel 510 mmVerfahrweg Z / Z-Travel 510 mmTischgröße / table size 1200x450 mmWerkzeugschaft / spindle taper BT40 Drehzahlbereich / spindle speed 8000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 20 Gewicht der Maschine ca. / weight ca. 5000 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32.0 mm: 35.0 mmbore stroke: 150 mm: M 22 (St 60) throat: 300 mm: 0.1 - 0.2 mm/U: MK 4 : 480 x 480 mm: 80.0 - 1.170 U/min: 0.90 / 1.35 kW: 340 kg: 800 x 1000 x 2000 mm Manufacturers list price: 8.665.00 EURO Special price on requestEquipment:- Column drilling machine - V-belt drive- infinitely variable speed adjustment- Manual automatic spindle feed- Thread cutting device automatic feed reversal RS for thread cutting- pole-changing drive motor- depth scale and adjustable depth stop- Height-adjustable work table Adjustment with hand crank- Right/left rotation of the drill spindle- Machined machine base incl. coolant device- Machine/work light- Folding drill spindle guard- Emergency stop button at the front- CE marking + instruction manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: FIDIA PCN 775 : . x-travel: 1000 mmy-travel: 620 mmz-travel: 700 mmAxis: 5 Achsen simultan gesteuertweight: 12 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40-1080 tool taper: MK 5 weight of the machine ca.: 2 tfeed: . Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: Heidenhain iTNC 530 c-axis: 360 b-axis: -5/+110 °turning speeds: 20- 10000 U/minpower capacity - milling spindle: 13 kWmax. torque on the spindle: Nmtool taper: SK 40 no. of workpieces in the magazine: 16 Stückrapid traverse: 24 m/minFeed speed: m/min.table surface area: 630 x 500 mmtable load: 200 kgweight of the machine ca.: 4,0 tdimensions: 2,3x 3,2 x 2,75 m3 + 2 axis Milling Center- Turn-/swiveling table full programmable- electr. hand wheel- new spindel in 2015The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 3 bore capacity in steel (diameter): 40 mmbore stroke: 180 mmweight of the machine ca.: 2,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 560 mmy-travel: 560 mmz-travel: 660 mmControl: M 730 BM MAPPS IVdistance spindle center to table: 80 - 640 mmdistance Spindlenose and center of table: 70 - 730 mmMain spindle:: max. spindle speed: 12.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 spindle diameter in front bearing: 80 mmpallet changer:: numbers of pallets: 2 pos.work height max.: 1.050 mmsize of pallet: 400 x 400 mmmax. workpiece weight: 400 kgmax. workpiecediameter: 630 mmMax. workpiece - hight: 900 mmB-Axis: 0,001 °Indexing-time 90°: 1,3 secchange time of pallets: 8,0 secTool-Presetter:: number of toolpositions: 60 pos.tool taper: SK 40 max. tool diameter: 70 mmmax. tool-dia with free toolbox: 170 mmmax. tool length: 450 mmmax. tool weight: 8 kgchange-time tool to tool: 0,9 secchange-time chip to chip: 2,8 - max. 9,9 secfeeds:: feed speeds: max. 60.000 mm/minrapid traverse ( X / Y ...
x-travel: 560 mmy-travel: 560 mmz-travel: 660 mmControl: M 730 BM MAPPS IVdistance spindle center to table: 80 - 640 mmdistance Spindlenose and center of table: 70 - 730 mmMain spindle:: max. spindle speed: 12.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 spindle diameter in front bearing: 80 mmpallet changer:: numbers of pallets: 2 pos.work height max.: 1.050 mmsize of pallet: 400 x 400 mmmax. workpiece weight: 400 kgmax. workpiecediameter: 630 mmMax. workpiece - hight: 900 mmB-Axis: 0,001 °Indexing-time 90°: 1,3 secchange time of pallets: 8,0 secTool-Presetter:: number of toolpositions: 60 pos.tool taper: SK 40 max. tool diameter: 70 mmmax. tool-dia with free toolbox: 170 mmmax. tool length: 450 mmmax. tool weight: 8 kgchange-time tool to tool: 0,9 secchange-time chip to chip: 2,8 - max. 9,9 secfeeds:: feed speeds: max. 60.000 mm/minrapid traverse ( X / Y ...
x-travel: 800 mmy-travel: 800 mmz-travel: 800 mmcontrol: SIN840D spindle turning speed - stepless: 5 - 10.000 U/minpower capacity at 40 % load: 38,00 KWpower capacity at 100 % load: 25,00 kWmax. torque at 40% / 100% load: 288 / 187 kWspindle diameter in front bearing: mmspindle taper: HSK 100 feed X/Y/Z/-axis: 0 - 60.000 mm/minrapid traverse X/Y/Z: 60,00 m/minfeed capacity X/Y/Z: 12,00 kNB - axis: 180 x 0,001 °rapid travel B-axis: 10,00 U/minsize of pallet: 800 x 630 mmtable load: 0,80 tC-axis: 360 x 0,001 °rotary table speeds infinitely variable: 1 - 800 U/minpower capacity - table: 13,85 kWmax. torque on the faceplate: 1.550 Nmtoolpiece magazine: chain magazine: 60 Stücktool diameter: 110 mmwotkpiece diameter with 2 vacant positions: 230 mmtool length - max.: 450 mmweight of tools max.: 30,00 kgtotal power requirement: 80,00 kWweight of the machine ca.: 18,00 tdimensions of the mac ...
x-travel: 450 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-MD CNC controlelectronical handwheel24-fold tool changercoolant devicechip conveyorTechnische Daten / technical details:X-Weg / X-travel 450 mmY-Weg / Y-travel 400 mmZ-Weg / Z-travel 400 mmSpindelaufnahme / spindle taper SK40 Drehzahl / spindle speed 15000 UpM /rpmEilgang / rapid feed 36 m/minTischaufspannfläche / table clamping area 770x410 mmWerkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel / drive capacity spindle 16 kWGewicht ca. / weight ca. 3500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.The data for this ad was created with ...
x-travel: 2100 mmy-travel: 1020 mmz-travel: 762 mmControl: Fanuc MXP-200FP spindle speed: 6000 U/minspindle capacity: ca. 22 kWmax. torque on the spindle: ca. 550 Nmtool taper: SK 50 table surface area: 2300 x 1020 mmmax. table load: 3000 kgT-slots: 6 x 22 mm T-slot - distance: 150 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-Axis CNC Machining CenterEquipment/Accessories:- Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm- coolant system with internal coolant supply and filter- emulsion mist extraction- electronic handwheel- 2 pcs. magnetic clamping plates 800 x 400 mm- various tool tapers SK50- chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stiens Werkzeugmaschinenhandelsgesellschaft mbH
