We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree

Round table milling machines DMG MORI CMX 50 U

macchine per lavorazione dei metalli / fresatrici / Fresatrici a tavola rotonda

TOP
Seller

Fabbricante: DMG MORI

Modello:CMX 50 U

Tipo di macchina: Round table milling machines

Numero di articolo: 168467901

Quantità: 1

Data: 23.12.2025

Prezzo:


Seller-item-No.:011200


General
Universal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control
Working area 1
Longitudinal 500 mm
Cross 450 mm
Vertical 400 mm
Technical Data
Feed rate longitudinal/transverse/vertical 30000/30000/30000 mm/min
Rapid traverse longitudinal/transverse/vertical 30/30/30 m/min
Floor space/Weight
Dimensions (L x W x H) 3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) m
Weight approx. 4700 Kg


Swivel Rotary Table Powered B/C Axes Swivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!
Mode for positioning only
5. Axes (swivelling range) -5/+110 x 0,001 degree
4. Axes (swivelling range) 360 x 0,001 degree
Distance between T-Slots 63 mm
Number of Slots 7
Slot width 14 mm
Maximum load (table centre) 200 Kg
Table surface Ø 630 x 500 mm
Type of Measuring system Direct measuring system
Direct measuring system X,Y,Z Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System
inlineMASTER® spindle 15.000 rpm inlineMASTER® spindle 15.000 rpm Spindle speed range 20 to 15.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 20kW (40% DC) / 14,5kW (100% DC) Torque: 121 Nm (40% DC) / 84 Nm (100% DC) bearings oil-air
Tool Magazine 60 places Tool Magazine 60 places SK40 Option includes: - Tool magazine 60 places with double gripper; chain type, servo drive - Tool (Un-) Loading through Magazine Door during AUTO Mode - Tool magazine door - Automatic magazine shutter (instead of brushes
Air coolant internal (through spindle centre) Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low oil rate
Tropical Package for inlineMASTER Tropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel - Hydraulic oil temperature sensor - Chiller unit 3,3 kW for main drive Option available for inlineMASTER® 12.000 rpm or 15.000 rpm
Renishaw Touch Probe-Kit for SIEMENS control Touch Probe-Kit for SIEMENS control Option includes: - PP40 Touch Probe with optical signal transmission; - D51252871 TS27R Probe for Tool Measurement; - Calibration Tool; - Calibration Ring; - Case for equipment. Direct measuring system recommended
Preparation 3D quickSET Machine Preparation for use of the 3D quickSET Toolkit. Option included software for 3D quickSET for one machine (only with option Touch Probe)
Production Package 40 bar Production Package 40 bar Option includes: - Internal coolant supply 40 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 250 l (left) - Bed and ATC arm flushing via M-Function - Coolant spray gun for swarf
10 Free M-Codes (M180-M189) 10 Free M-Codes (M180-M189) for SIEMENS control
Safety Package for Power Failure Safety Package for Power Failure Option includes: - X,Y - axis motor with brake - Overload limiter - Undervoltage monitoring
Technology cycle MPC 2.0 Technology Cycle Machine Protection Control MPC 2.0 Technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. Machine protection by quick shutdown. For SIEMENS control
Machine preparation for PH 150_PH Cell / EROWA Machine Preparation for Pallet handling system PH 150 / PH Cell with EROWA equipment Option includes: - Automatic lift door on right cabin side - Robot interface (DMG MORI Standard) - Hydraulic / pneumatic preparation with 4 channels on the machine tab
Special equipment SK-FA0176 Tool clamping HSK-A63 for tool tapers according to DIN 69893
Special equipment PH-150 pallet loading and unloading system with handling system and pallet magazine
Condividi questa macchina su Facebook:

Inchiesta

Commerciante di macchine?

Si prega di rimettere in opzione

Inviare la domanda desiderato?

Copia a voi?

Save input data


General
Universal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control
Working area 1
Longitudinal 500 mm
Cross 450 mm
Vertical 400 mm
Technical Data
Feed rate longitudinal/transverse/vertical 30000/30000/30000 mm/min
Rapid traverse longitudinal/transverse/vertical 30/30/30 m/min
Floor space/Weight
Dimensions (L x W x H) 3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) m
Weight approx. 4700 Kg


Swivel Rotary Table Powered B/C Axes Swivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!
Mode for positioning only
5. Axes (swivelling range) -5/+110 x 0,001 degree
4. Axes (swivelling range) 360 x 0,001 degree
Distance between T-Slots 63 mm
Number of Slots 7
Slot width 14 mm
Maximum load (table centre) 200 Kg
Table surface Ø 630 x 500 mm
Type of Measuring system Direct measuring system
Direct measuring system X,Y,Z Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System
inlineMASTER® spindle 15.000 rpm inlineMASTER® spindle 15.000 rpm Spindle speed range 20 to 15.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 20kW (40% DC) / 14,5kW (100% DC) Torque: 121 Nm (40% DC) / 84 Nm (100% DC) bearings oil-air
Tool Magazine 60 places Tool Magazine 60 places SK40 Option includes: - Tool magazine 60 places with double gripper; chain type, servo drive - Tool (Un-) Loading through Magazine Door during AUTO Mode - Tool magazine door - Automatic magazine shutter (instead of brushes
Air coolant internal (through spindle centre) Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low oil rate
Tropical Package for inlineMASTER Tropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel - Hydraulic oil temperature sensor - Chiller unit 3,3 kW for main drive Option available for inlineMASTER® 12.000 rpm or 15.000 rpm
Renishaw Touch Probe-Kit for SIEMENS control Touch Probe-Kit for SIEMENS control Option includes: - PP40 Touch Probe with optical signal transmission; - D51252871 TS27R Probe for D51252871 Tool Measurement; - Calibration Tool; - Calibration Ring; - Case for equipment. Direct measuring system recommended
Preparation 3D quickSET Machine Preparation for use of the 3D quickSET Toolkit. Option included software for 3D quickSET for one machine (only with option Touch Probe)
Production Package 40 bar Production Package 40 bar Option includes: - Internal coolant supply 40 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 250 l (left) - Bed and ATC arm flushing via M-Function - Coolant spray gun for swarf
10 Free M-Codes (M180-M189) 10 Free M-Codes (M180-M189) for SIEMENS control
Safety Package for Power Failure Safety Package for Power Failure Option includes: - X,Y - axis motor with brake - Overload limiter - Undervoltage monitoring
Technology cycle MPC 2.0 Technology Cycle Machine Protection Control MPC 2.0 Technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. Machine protection by quick shutdown. For SIEMENS control
Machine preparation for PH 150_PH Cell / EROWA Machine Preparation for Pallet handling system PH 150 / PH Cell with EROWA equipment Option includes: - Automatic lift door on right cabin side - Robot interface (DMG MORI Standard) - Hydraulic / pneumatic preparation with 4 channels on the machine tab
Special equipment SK-FA0176 Tool clamping HSK-A63 for tool tapers according to DIN 69893
Special equipment PH-150 pallet loading and unloading system with handling system and pallet magazine

seller offer No. resale 011200
Condividi questa macchina su Facebook:
aggiungi alla lista selezionati
rivenditore
autorizzato

Venditore

logo dealer

DMG MORI Used Machines GmbH

Signora Kerstin Bauer
82538 Geretsried
Germany

RESALE membro dato che 2019


verified user
[ profilo del rivenditore ]
  • elenco macchine (156)
invia la richiesta
invia la richiesta

Inchiesta

Commerciante di macchine?

Si prega di rimettere in opzione

Inviare la domanda desiderato?

(a tutti i concessionari per una tale macchina)

Copia a voi?

(copia della richiesta sarà inviata al vostro indirizzo email)

Save input data

(Save input data for further inquiries)

di più DMG MORI CMX 50 U + similar DMG MORI-Modello

2017 DMG MORICMX 600 V
DMG MORICMX 600 V
2017 DMG MORICMX 600 V
DMG MORICMX 1100 V
DMG MORICMX 1100 V
2019 DMG MORICMX 1100 V 111125 EUR
DMG MORICMX 50 U
DMG MORICMX 600 V
2018 DMG MORICMX 600 V 57500 EUR
2022 DMG MORICMX 70U

Prezzo: sold DMG MORI CMX 50 U + simili DMG MORI-Modello

2018 DMG MORICMX 70 U 96430 EUR [Dec 2024]
2018 DMG MORICMX 70 U 113615 EUR [Apr 2022]
2022 DMG MORICMX 70U 155000 EUR [Oct 2024]
2019 DMG MORICMX 1100 V 105835 EUR [Dec 2024]
2016 DMG MORIMicroset UNO 20/40 10000 EUR [Feb 2024]
2014 DMG MORIULTRASONIC 10 200000 EUR [Nov 2020]
2016 DMG MORIULTRASONIC 10 213953 EUR [Dec 2020]
2015 DMG MORIECOMILL 50 Unive 65000 EUR [Nov 2022]