sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 108)
Machine à souder, entièrement fonctionnelle
Lg.Nr. 25075 Mot. Table rotative et basculante de soudage Spécifications: - Capacité de charge 1000 kg - Diamètre de la plaque frontale 800 mm - La plaque frontale peut être inclinée par le moteur - Mouvement rotatif electr. Variable en continu 0 - 250 cm/min - Transmission du courant de soudage 650 A - Entraînement 400 V / 2,8 kW - Hauteur de la table en position horizontale env. 1100 millimètre - Re- + rotation dans le sens inverse des aiguilles d’une montre - Encombrement approximatif L 1200 x H 1100 x P 1500 mm - Poids env. 850 kg
Positionneur rotatif à double colonne avec dispositif de levage Lg.Nr. 25138 Spécifications: - Capacité de charge max. par support 4000 kg - Capacité de charge totale max. 7000 kg - Débattement / course 1780 mm - Vitesse de levage 1600 / 2800 mm/min - Mouvement rotatif electr. réglable - Droite + Gauche – Courir - Entraînement 400 V - Besoins en espace demandés. Unité env. L 1500 x H 4000 x P 1500 mm - Espace requis pour l’unité mobile L 1300 x H 4000 x P 1300 mm - Unité de poids env. 4000 kg - Poids de l’unité de course env. 2500 kg
On utilisait des lignes de soudage de treillis métallique EVG LGR pour la production de treillis de clôture et de treillis industriel Largeur de maille : min 500 mm et max. 2.150 mm Longueur de maille : min 600 mm et max. 3 000 mm séparation des fils transversaux : min. 12,5 mm et ensuite en continu séparation du fil de ligne : min. 25 mm et ensuite en continu Plage de travail : min. 2,0 mm et max. 6,0 mm Non. Nombre de fils de ligne : 52 pièces Vitesse de production : 150 cw/ min puissance installée à 50 %ED : 840 kVA Hauteur d’empilage : max. 600 mm
Poids max. : 15/30 tDiamètre de la pièce : 600 - mmDiamètre de l’engrenage : 520 mmVitesse de rotation Entraînement Pas de vitesse : U/minPuissance totale requise : 2 x 1,1 kWPoids de la machine env. : 2300 kgDimensions de la machine env. : mm
current capacity: 25 kVAnumber of controlled axis: 6 workpiece weight: 10 kgweight of the machine ca.: 1,55 tYear of construction 2020 demonstration machine, as newEasy ARC 01.02 FD-B6 Welbee P500L welding robot stationMIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6with welding table 2000x1200mmHole diameter 28 mmThe mobile welding cell for the craft businessSetting range MIG / MAG 20 - 500 ASteplessly adjustable switching levelsDuty cycle at max.current 40 ° C 50%Current at 100% ED 40 ° C 410 AWire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spécifications: - Capacité de charge max. 5000 kg - Diamètre de serrage max. 1800 mm - Dimensions de la plaque frontale 1200 x 1200 mm - Mouvement rotatif electr. Variable à l’infini - Droite + Gauche – Courir - E. - Télécommande - Transmission du courant de soudage env. 650 A - Entraînement 400 V / 2,2 kW - Encombrement approximatif L 1500 x H 1650 x P 1300 mm - Poids env. 2500 kg
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,73 tdimensions: 2,0 x 1,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mmtable width: 800 mmtable height: 840 - 890 mmweight of the machine ca.: 0,3 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.The table can be moved with a pallet truck.Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,74 tdimensions: 2,0 x 1,0 x 0,9 mProduct description- High quality steel S355J2+N + plasma nitriding- Material thickness approx. 17 – 19 mm- Bore Ø 22 mm- Holes surface 100x100 mm grid- Rounded corners, edges and holes- Height of side panel 150 mm- Hole spacing in side cheeks 50 mm- Including scaling on the surface- Construction reinforced with ribs- Grid lines enable precise setups- Special equipment for welding tables is available on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
courant de soudage : 10 - 200 AFréquence de charge connectée : 230 VPoids : 16 kgDimensions (LxlxH) : 600 x 300 x 400 mmPoste à souder TIG, la livraison comprend- Pince de terre 300 A avec câble de soudage de 1,5 mètre- Porte-électrode à l’italienne 200 A avec câble de soudage de 2 mètres- Sangle de transport
longueur : 0 mmhauteur : 0 mmpuissance totale requise : kWpoids de la machine env. : 0,8 tdimensions de la machine env. : mMachine de soudage par ultrasons pour articles en plastique
table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,74 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2+N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 17 - 19.0 mm.The holes have a diameter of 22 mm.Hole arrangement in a 100 mm grid on the table top,Side panels 150mm with parallel hole arrangement in a 50mm grid.Incl. basic foot equipment. Table height 850mmPrice plus packaging and transport.Other dimensions available.The accessories shown are not included in the scope of delivery.Optionally available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 106 Positionenweight: 283 kgcondition: neu : 28 mmSet. 4: 110 pieces 28mm system, consisting of:Ferrules: 14 x 280610.NFerrules: 10 x 280630.NPrism: 6 x 280648.1.NBolt: 30 x 160511Magnetic bolt 8 x 280740Stop: 10 x 280410.NStop: 10 x 280420.NStop: 4 x 280430.NAngle: 8 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NTrolley: 1 x 280910Accessory set. 1 x 283999Price information plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1200 mmtable load: 3 tswivelling range: 0 - 135 Gradturning speeds: 0,07- 0,7 U/mintable height adjustment: von 980 bis 1750 mmmax. torque on the faceplate: 4500 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 2000 mmtable load: 10000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,02 - 0,2 U/minheight adjustment: 1450 - 2200 mmmax. torque on the faceplate: 20000 Nmengine output: 1,5 / 2,0 kWwelding current: 1000 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1400 mmtable load: 4 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 8000 Nm0: 1,1 / 1,5 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 400 mmtable width: 400 mmtable load: 0,2 ttable diameter: 400 mmswivelling range: 90 Gradturning speeds: 0,2 - 2 stufenlos U/mintable load capacity: 100 kg. vertikaltotal power requirement: 220 kWweight of the machine ca.: 0,065 tdimensions of the machine ca.: 0,56 x 0,42 x 0,46 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 2000 mmtable load: 10,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 20000 Nmtable pass: 200 mmwelding current: 1000 Amperetotal power requirement: 3,0 + 4,0 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1300 mmtable load: 3000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/minheight adjustment: 1200 - 1800 mmmax. torque on the faceplate: 6000 Nmengine output: 1,1 / 1,1 kWwelding current: 700 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1600 mmtable load: 8 tswivelling range: 0 - 130 Gradturning speeds: 0,05- 0,5 U/mintable height adjustment: von 1210 bis 2238 mmmax. torque on the faceplate: 1200 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping range of chuck: 10 - 200 mmheight: 67,5 mmdaylight: 65 mmexternal diameter: Futter 200 mmexternal diameter: Spannhebel 360 mmweight: 4 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
poids max. : 1000 Kg Diamètrede la pièce : 20 - 800 mmDiamètre du tambour : 200 x 50 mmAlimentation : 50 - 2000 mm/minpoids : 65 kgPuissance totale requise : 0,6 kWDimensions de la machine env. : 0,8 x 0,6 x 0,6 mBloc à rouleaux- Trépied de torche- Vitesse réglable en continu- Pédale de commande- Mode d’emploi en anglais
welding current: 5 - 160 Aconnected load frequency: 230 Vweight: 7,9 kgDimensions (LxWxH): 310 x 140 x 230 mmESAB inverter TIG welding machine Rogue ET 180i CE TIG DCAn excellent high-frequency TIG ignition ensures afaultless welding start, as well as even and stablearc properties.Easy to use - setting up the welding parameters issimple and intuitive.Robust design IP23S housing for applications inproduction plants and on construction sites.Comprehensive TIG functions for optimal process control forevery application and a pulse function of up to 500Hz tocontrol the ideal heat input.A PFC module ensures a stable arc andinsensitivity to mains fluctuations - even when working withlong extension cables of up to 100 meters (PRO version only).Optionally, the welding current can be set from the TIG torch, foot pedal orhand-held remote control.technical data:Primary voltage, 1-phase 230 VAC ±15% ...
courant de soudage : max. 200 Atension en circuit ouvert : 14 - 24 VFréquence de charge connectée : 230 VPoids : 25 kgDimensions (LxlxH) : 500 x 200 x 300 mmÉquipement : Ensemblede tuyaux Câblede terre Buses de soudage
table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,26 tdimensions: 1,2 x 0,8 x 0,85 mSpecial offer ! Siegmund workstation incl. 2 drawers + tool set Bhigh quality steel S355J2 + N, plasma nitrided and BAR-coatedBoreholes Ø 22 mm, boreholes surface 100x100 mm gridMaterial thickness approx. 17 - 19 mmConsisting of:1x 004002 (Siegmund Workstation)1x 224004.P (perforated plate)1x 224030 (clamp holder)1x 004020 (shelf)1x 224035 (bolt and prism holder)1x 004025 (tool wall including shelf)2x 004210 (drawer)4x 220610.1 (clamp)8x 220511 (double quick release bolts without groove)6x 220410.N (stop)2x 220110.N (angle)1x 220852 (Allen key)1x 004303 (vice)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diamètre de la table : 1000 mmcharge de la table : 1200 Kg Plagede pivotement : 0 - 135 Vitesses de rotation graduelles : 0,1 - 1,0 U/mincouple max. sur la plaque frontale : 900 NmCourant de soudage : 500 ampèrespuissance totale requise : 0,75 + 0,75 kWpoids de la machine env. : 0,8 tTable basculante rotative de soudage- Télécommande- 2 x transmission de courant de soudage
table length: 1300 mmtable width: 800 mmtable height: 920 - 1000 mm: 1000 kgheight of stroke: 510 - 1550 mmtotal connected load: 1,5 kWconnected load frequency: 230 Vweight of the machine ca.: 0,55 tWelding table on lifting table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmRibbed bottom for reinforcement.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 550 mmtable load: 500 Kgswivelling range: 135 Gradtilt adjustment: manually/mechanicall: motorisch turning speeds: max. 5 U/min stufenlostable load capacity: 250 kg. vertikaltotal power requirement: 0,8 kWweight of the machine ca.: 245 Kgdimensions of the machine ca.: 820 x 730 x 710 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
