MB machine à vendre

Plieuse MB multipli-CAS 524 Type de machine : FN

Poches: 4 Taille max. de la feuille (cm): 52 x 85 Min. taille de la feuille (cm): 10 x 12 Longueur min. de pli (cm): 3,5 Équipement / informations complémentaires: T-STATION 2.FW CAS 52-B (4 poches) Ser. N°: 00958228 CHARGEUR D’EMPILAGE FSA52 Ser. N°: 00979092

N° S. : 031059211 Puissance : 200 m/min (selon le matériau) Taille (cm): max. 38 x 65 // min. 7 x 12 Équipement / informations complémentaires: Poches: 4 Longueur du pli: max. 46,5 cm; min. 3,5 cm / 1,8 cm Grammage du papier : 40 à 250 GMS avec rainure et arbre de perforation

M. N° : 79750864 Taille (cm): 38x38 Sacs: 2 Types de plis: pli en spirale, pli en zigzag, pli double parallèle, pli simple Équipement / informations complémentaires: Compresseur

Format (mm): Max 297 x 420 // Min. 105 x 148 Sacs: 2 Types de plis: pli en spirale, pli en zigzag, pli double parallèle, pli simple

Format (cm): 35x45 Équipement / informations complémentaires: Poches: 2 Types de plis: couture d’enroulement, pli en zigzag, double couture parallèle, couture simple Exploit: Chargeur d’aspiration sous le plancher: 30 000 feuilles/h Chargeur à friction : 20 000 feuilles/h pour la veine parallèle A4, 80 g/m2 Poids du papier: 40 - 250 g / m2 avec pli parallèle simple Valeurs de connexion électrique: Tension secteur: 230V Consommation de courant: max. AIO

4 sacs et 4 Sniffer Sortie Available: Immédiatement

Prestige Fold52 folder with window fold 52/6 - FSA, NET 52/0/6, DRY PUMP

Computerized control panel. Automatic setting of measurements and type of fold. 60 memory channels. Electronic control of the distance between the sheets and of the double sheet. Visualization of the pressure value of the folding rollers. 4 parallel folds Folding rollers diameter mm. 40. Format: maximum mm. 380 x 650 minimum mm. 70x120. Minimum fold length mm. 28. Speed ​​up to 200m/minute. Paper weight from 40 to 250 g/m2. Electronic control of the double sheet. Non-stop continuous charging power supply. Revised and guaranteed for 12 months

Falzmaschine / Folding Machine (Pharma-Fold) Multipli 464S Serial-No. 83357220 Unterflur-Sauganleger / Non-Stop Feeder Anleger Format / Feeder Size min. 10x10cm - max. 45,5x63cm Leistung / Output max. 220m/min Papiergewicht / Paper weight 40-200g/m2 4 Taschen 4 Bogenweichen / 4 Buckles 4 Deflectors 1 Kompressor / 1 Compressor Schuppenauslage / Stream Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Ersatzteile - Pièce détachée MB Multipli 382 2 boucles déployantes pour MB 382 Livraison de bande pour MB 382-Online-Video-Inspection by Skype-Video- -Nous serions très heureux de votre visite - plus de machines sur Stock- -Disponible immédiatement - Peut être inspecté- -En stock Emskirchen / Nuremberg - Peut être testé-

Plieuse MB multipli-cas 524 N° de série. 78261 Online-Video-Inspection par Skype-Video Nous serions très heureux de votre visite - plus de machines sur Stock Disponible immédiatement - Peut être inspecté En stock Emskirchen / Nuremberg - Peut être testé

Boucles : 4 pcs couteaux : 0 pcs max. taille du papier : 52 x 85 cm N° de série : 98979071 vitesse : 200 m/min tension : 3 x 400 V fréquence : 50 Hz dimensions : 3 x 1m + 1,80 x 1 m profondeur de pliage max. 46,5 cm grammage du papier 40-250 g/m ² pleine taille 10 x 12 cm

Number of sanding units: 2 St. sanding width: 100,150 mm Sanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: 230 Volt table diameter: 300 mm table load: 100 Horizontal kg swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min turning speeds: 1,2 - 12,0 U/min bore: 20,0 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The devices control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software  ...

table diameter: 340 mm table load: 290 horizontal kg table load capacity: 190 vertikal kg turning speeds: 0,6 - 6,0 U/min spindle bore: 60,0 mm swivelling range: 0 - 90 Grad weight of the machine ca.: 62 kg dimensions of the machine ca.: 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions ...

table diameter: 500 mm table load: 300 horizontal kg. table load: 150 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,5 U/min bore: 90,0 mm table height: ~ 650 mm mm motor: 230 Volt weight of the machine ca.: 90,0 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 340 mm table load: 160 horizontal kg. table load: 100 vertikal kg. turning speeds: 0,6 - 6,0 U/min swivelling range: 0 - 90 Grad bore: 60,0 mm motor: 230 Volt weight of the machine ca.: 56 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating in ...

table diameter: 900 mm table load: 1.000 kg turning speeds: 0,12 - 1,2 U/min swivelling range: 0 - 135 Grad speed: Kipp 0,35 U/min welding current: 500 A dimensions of the machine ca.: 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.