Modèle
(Fabricant: HBM)
turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 8 bar Effective free air delivery: 235/165 L/min Receiver capacity: 50 / 10 l / bar weight of the machine ca.: 37,5 kg. Number of cylinders: 2 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 790 x 400 x 730 mm This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 45 mm quill stroke: 125 mm : 560 mm : 230 mm table surface area: 800 x 240 mm spindle turning speed range: 75 - 3200 U/min max. milling cutter diameter: 80 mm spindle taper: ISO 30 max. distance between table and spindle-nose: 460 mm throat: 230 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 580 Kg dimensions of the machine ca.: 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 275 mm bore stroke: 120 mm spindle taper: MK 4 turning speed range: 75 - 3200 U/min : 190 mm : 490 mm table surface area: 730 x 210 mm connected load frequency: 400 V boring feeds:: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Measuring amplifier, for flow meter, vibration measurement, display device, vibration measurement, monitor display -Manufacturer: HBM, industrial measuring amplifier -Type: PME MP60 -Number: 2 measuring amplifiers available -Price: per piece -Dimensions: 160/60/H145 mm -Weight: 0.9 kg
MGC Compact Voir les photos pour plus de détails
rated capacity: 2,0 KW rated current: 10/6,0 Ampere output voltage: 2 x 230AC / 1 x 12DC V weight of the machine ca.: 29 Kg dimensions of the machine ca.: 490 x 280 x 405 mm A powerful, reliable 2000 watt generator. Durable and energy efficient 80cc 4-stroke engine. Ideal for traveling with a motorhome, caravan or tent. Equipped with 2 x 230V and 1 x 12V DC output. Automatic overload protection. Only 29 kilograms (!). Easy to carry or store. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
largeur des bandes : 100 mm longueur de la bande : 610 mm table de travail :: 170x125 / 265x150 mm : 16 mm vitesses de tournage : 2000 U/min diamètre du rouleau : 16, 23, 29, 41 et 53 mm puissance totale requise : 0,45 kW poids de la machine env. : 114 Kg dimensions de la machine env. : 0,6 x 0,5 x 0,5 m
Diamètre : 200 mm Hauteur : 105/265 mm Hauteur du centre : 105 mm Poids de la machine env. : 41 kg Dimensions de la machine env. : 400 x 330 x 310 m
largeur des bandes : 150 mm Longueur de la bande : 1220 mm Dimensions de la meule : 225 mm Table de travail :: 150 x 400 mm Table inclinable jusqu’à : 90 Surface de la table Grad : 150 x 130 mm Fréquence de charge connectée : 230 V Puissance totale requise : 0,75 kW Poids de la machine env. : 35 Kg dimensions de la machine env. : 650 x 360 x 400 millimètre
Largeur des bandes : 75 mm Longueur de la bande : 2000 mm Vitesse de la bande : 30 m/sec Puissance totale requise : 3 kW Poids de la machine env. : 70 t Dimensions de la machine env. : 1,2 x 0,5 x 0,75 m Ponceuse à bande avec - Disque de contact : 600 x 75 mm
range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4 from 4 - 14mm, 3/8 from 6 - 22mm and Torx from E10 - E20, 1/2 from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diamètre de la lame de scie : 80 - 700 mm Moteur-tête de broche : 0,25 kW Diamètre de la meule : 125 mm Vitesses de rotation : 2850 U/min Plage de rectification : -20 bis +20 Grad Poids de la machine env. : 12 Kg Dimensions de la machine env. : 700 x 400 x 300 m
Largeur de la feuille : 1020 mm Épaisseur de la plaque : 2,5 mm Distance entre les colonnes : 1050 mm Ouverture de la lumière du jour : mm : 135 Puissance totale requise : Handbetrieben kW Poids de la machine env. : 0,32 t Dimensions de la machine env. : 1,4 x 0,6 x 1,3 m Cintreuse de segments Largeurs des segments : 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 et 260mm.
bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 500 x 460 mm column diameter: 115 mm turning speeds: 75- 3200 U/min feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,5 kW weight of the machine ca.: 350 kg range L-W-H: 2,2 x 0,8 x 0,7 mm Column drilling machine with: automatic feed Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
courant de soudage : 30 - 200 A Fréquence de charge connectée : 230 V Poids : 3,6 kg Dimensions (LxlxH) : 290 x 135 x 2600 mm Contenu de la livraison : Poste à souder TIG Buddy TIG 160 Électrode et câble de terre 3m Torche TIG ET 17 4m Tuyau de gaz avec écrou-raccord
Épaisseur de la mâchoire : 125 mm Plage de serrage : 220 mm Hauteur de serrage : 46 mm Force de serrage max. : 4500 Kg poids : 42 kg dimensions : 670x185x120 mm Étau de machine hydraulique
courant de soudage : 15 - 40 A Capacité de coupe : 1 - 16 mm tension en circuit ouvert : 96 V Pression d’air requise : min. 4 bar Puissance connectée : 3,6 kW Fréquence de la charge connectée : 230 V Poids : 9,0 kg Dimensions (LxlxH) : 371 x 153 x 232 mm Machine d’exposition Découpeur plasma Inverter avec accessoires : Torche de coupe avec câble de 4 m, pince de mise à la terre avec câble de 2,5 m, manomètre , masque et brosse.
Largeur de la feuille : 915 mm Épaisseur de la plaque : 1,0 mm Distance entre les colonnes : 920 mm Ouverture de la lumière du jour : mm : 135 Puissance totale requise : Handbetrieben Poids de la machine env. : 96 Kg Dimensions de la machine env. : 1170 x 400 x 480 m Cintreuse de segments Largeurs de segments : 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 et 260mm.
range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding range: 8 - 32 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 16 Kg dimensions of the machine ca.: 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 225 mm dimensions of saw-band: 2480 x 27 x 0,9 mm table height: 935 mm cutting speed: 45 + 90 m/min : 225 mm : 145 mm : 90 mm : 150 x 245 mm : 190 x 150 mm capacity 60 degrees: flat: 120 x 90 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 1380 x 580 x 930 mm - With an output of 1100 watts, the device is ideal for processing hard types of metal. - Thanks to the emergency stop and automatic switch-off, you can work safely - The low-noise electric motor ensures a quiet working atmosphere - Comfortable buttons guarantee pleasant operation of the device. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diamètre : 150 mm Hauteur : 80 mm Hauteur du centre : 105 mm Poids de la machine env. : 18 kg Dimensions de la machine env. : 300 x 80 x 200 m
0 : 199,5 x 67,5 x 64 mm Pression de service : 2,5 - 8,0 bar Consommation d’air à 6 bar : 350 l/min Poids de la machine env. : 0,23 t Dimensions : 2,10 x 1,30 x 0,88 m Cabine de sablage duo 10 feuilles PET pour protéger les fenêtres 10 feuilles PET pour protéger l’éclairage fluorescent 2 pédales 2 pistolets à jet 6 inserts de buse en céramique (6 mm de diamètre)
table length: 1600 mm table width: 800 mm stroke height: 900 mm : 310 mm weight max. in kg: 500 kg weight of the machine ca.: 0,16 t : 1,7 x 0,82 x 0,33 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 180 mm spindle taper MT: 4 MK table:: 560 x 560 mm column diameter: 140 mm turning speeds: 50 - 1450 U/min feeds: 0,1 - 0,2 mm/U total power requirement: 1,5 kW weight of the machine ca.: 580 kg range L-W-H: 2,27 x 0,7 x 1,1 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Largeur des bandes : 100 mm Longueur de la bande : 915 mm Dimensions de la meule : 200 x 32 mm Diamètre du trou de la meule : 30 mm Puissance totale requise : 0,9 kW Poids de la machine env. : 35 Kg Dimensions de la machine env. : 620 x 540 x 300 mm
Diamètre de la meule : 250 mm Fréquence de charge connectée : 230 V : 90 - 180 U/min Poids de la machine env. : 18 Kg Dimensions : 470 x 300 x 440 m Dispositif d’affûtage des couteaux à vitesse variable Meule 250 x 50 x 12 mm, grain 220 Disque en cuir 200 x 30 x 12 mm
