sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 108)
utilisé
Courant de soudage à 25 % ED max. : 250 A Courant de soudage à 100 % ED : 110 A Courant de soudage étape par étape. Réglable : 5 - 250 A électr. Raccordement : 380 V Espace requis : 650 x 600 x 1100/1500 mm de hauteur Poids : 55 kg
à vendre est une machine à souder MIG -MAG de Ess Schweißtechnik Bad Waldsee, HV 8534, Sous réserve de vente préalable, de modifications et d’erreurs !
Puissance nominale : 63 kVA Projection : 520 mm Espacement des bras d’électrode : 200 mm Capacité de soudage de l’acier : env. 7 + 7 mm Puissance de soudage des métaux non ferreux : env. 2 + 2 mm électr. Raccordement : 380 V kW
Type de machine : Machine à souder à onduleur TIG Système DC et AC refroidi à l’eau Fabriquer Ess Type SquareARC 306 AC/DC Tension de connexion 3 x 400 volts Plage de réglage 5 – 300 ampères Cycle de service 60 % ED à 300 ampères 100 % ED à 230 ampères Réglage du courant réglable en continu Épaisseur max. du matériau soudable acier / acier inoxydable = 8 mm Aluminium = 5 mm Onduleur de refroidissement grâce au ventilateur intégré Brûleur de refroidissement refroidi à l’eau Conception d’une installation industrielle mobile Fusible 16 ampères à coup lent Dimensions L x l x H 950 x 435 x 980 mm Poids 120 kg Âge env. 10 ans estimé sans engagement État testé en atelier, bon avec rapport d’essai UVV Contenu de la livraison du système de soudage avec les accessoires suivants : 1 pièce torche de soudage ...
Plage de travail X/Y : 1200 mm/1600 mm. Débattement Z : 250 mm. Charge max. de la table : 80kg/m². Rotation rapide : 500 mm/s. Dimensions de la machine X/Y/Z : env. 2500mm/2000mm/1700mm. La machine est partiellement défectueuse. Une inspection sur place est possible.
number: 70 Positionenweight: 90 kgcondition: neu : 28 mmWMT Set 7: 70-piece, 28mm system, consisting of:3x Pipe clamps D28 90° – Item No. 40283973x Pipe clamps D28 180° – Item No. 40283963x Pipe clamps D28 45° – Item No. 40283983x Pipe clamps D28 300x150 – Item No. 40283993x Pipe clamps D28 300x200 – Item No. 402840015x Ball lock pins D28x50 – Item No. 402766310x Locking pins D28x80 – Item No. 40288764x Universal Stop D28 100x50x25 mm – Item No. 40284694x Universal Stop D28 150x50x25 mm – Item No. 40284704x Universal Stop D28 225x50x25 mm – Item No. 40276572x Universal Stop D28 300x50x25 mm – Item No. 40276592x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 40286572x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 40286582x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 40286492x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 40286522x Stop ...
Un système d’usinage de précision laser CNC Precicut est disponible. 1) Laser à fibre IPG Photonics YLR-150/1500-QCW-MM, année de fabrication : 2012, puissance laser moyenne : 150W, puissance d’impulsion : 1,5kW. 2) Collimateur d25 f50, année de fabrication : 2012, distance focale : 50 mm, diamètre : 25 mm. 3) Module de couplage pour BAK 4, année de fabrication : 2012. 4) Unité de contrôle ProCom CNC300. Documentation disponible. Une inspection sur place est possible.
Offre 05394 Spécifications: - Dispositif d’extraction de la transpiration testé par le BIA - Bras d’extraction d’articulation 3000 mm - Débit d’air env. 1000 m³/h - Pression statique max. 2700 Pa - Surface du filtre env. m² - Contrôle du filtre - lumière pour le changement de filtre - Efficacité de séparation 99,9 % - Raccordement à l’air comprimé 6 bar - Entraînement - Ventilateur 400 V / 1,5 kW - Encombrement approximatif L 700 x H min. 1800 x P 950 mm - Poids env. 250 kg
Offre 24587 Spécifications: - Filtre électrostatique avec voyant lumineux - L’air extrait et purifié est renvoyé dans la zone de travail - Conception murale avec deux bras d’extraction articulés - Longueur du bras d’aspiration articulé env. 9000 millimètre - Débit d’air env. 4700 m³/h - Surface de filtre actif 9,2 m² - Entraînement - Ventilateur 400 V / 0,75 kW - Encombrement approximatif L 700 x H 1600 x P 550 mm - Poids env. 120 kg
nombre : 31 Positionnez : 22 mmétat : neu poids : 43 kgJeu de 1 système de 33 pièces, 22 mm, composé de :Pinces : 4 x 220610.1Pinces 2 x 220630.1Boulon : 12 x 220511Butée : 4 x 220410.NButée : 4 x 220420.NAngle : 2 x 220110.NAngle : 2 x 220152.NJeu d’accessoires. 1 x 223999Prix plus emballage et transport.
number: 96 Positionenweight: 600 kgcondition: neu : 28 mmSpecial set 96 pieces, 28mm system, consisting of:1x tool trolley30x quick release bolts with twist lock short, without O-rings8x universal stop 150 L - nitrided4x universal stop 225 L - nitrided8x stop and clamping angle 175 L - cast2x stop and clamping angle 500 G left - nitrided1x stop and clamping bracket 750 G left - nitrided1x stop and clamping bracket 750 G right - nitrided1x stop and clamping bracket 500 G left - nitrided1x stop and clamping bracket 500 G right - nitrided4x stop and clamping angle 300 G left - nitrided8x prism Ø60-135 ° burnished - with collarcomplete with screw collar and countersunk head16x professional screw clamps - nitrided6x Professional screw clamp 45 ° / 90 ° - nitrided4x universal stop 300 - nitrided1x accessory set consisting of:Eccentric, Allen key, brush, sharpening stone, Probe CleanBasic, ...
table diameter: 1000 mmtable load: 1200 Kgswivelling range: 0 - 135 Gradturning speeds: 0,1 - 1,0 U/minheight adjustment: 1000 - 1450 mmmax. torque on the faceplate: 2000 Nmengine output: 0,75 / 0,55 kWwelding current: 500 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 780 mmtable load: 1,0 tswivelling range: 0 - 135 Gradturning speeds: 0,15 - 1,5 U/mintable height adjustment: von 780 bis 1560 mmmax. torque on the faceplate: 1000 Nmwelding current: 500 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 33 Positionenweight: 52 kgcondition: neu : 28 mmSet 1: 33 pieces, 28mm system, consisting of:Clamps: 4 x 280610.NClamps: 2 x 280630.NPrism: 2 x 280648.1.NBolt: 12 x 160511Stop: 4 x 280410.NStop: 4 x 280420.NAngle: 2 x 160110.NAngle: 2 x 280152.NAccessory set. 1 x 283999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 150 tworkpiece diameter: 1000 - 6300 mmdrum diameter: 500 x 300 mmfeed: 100 - 1000 mm/mintotal power requirement: 8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 560 mmtable load: 0,3 tswivelling range: 0 - 90 Gradturning speeds: 0,25 - 4,0 U/min: 360 Nmwelding current: 500 Amperetotal power requirement: 0,4 / Hand kW• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1400 mmtable load: 5 tswivelling range: 0 - 135 Gradturning speeds: 0,05- 0,5 U/mintable height adjustment: von 1100 bis 1950 mmmax. torque on the faceplate: 7000 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nombre : 37 Positionnez : 28 mmétat : neu poids : 29 kgSet de base 1 37 pièces, système de 28 mm, composé de :Pinces : 4 x 280604Boulon : 8 x 280511Butée : 6 x 280420.NAngle : 2 x 280110.GBoulon fileté 8 x 280543Butée 8 x 160415Jeu d’accessoires. 1 x 163999Prix plus emballage et transport.
weight max.: 3000 kgworkpiece diameter: 20 - 1500 mmdrum diameter: 100 x 200 mmconnected load frequency: 230 Vtotal power requirement: 0,12 kWdimensions: 0,8 x 0,37 x 0,36 mspeed: 100 - 1000 mm/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,64 tdimensions: 2,4 x 1,2 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional Surcharge for 25mm material thickness: 340, -EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 tworkpiece diameter: 100-2500 mmgear diameter: 250 mmgear width: 140 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,0 x 1,4 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 tworkpiece diameter: 100 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 tworkpiece diameter: 100 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 850 - 900 mmweight of the machine ca.: 0,65 tdimensions: 2,4 x 1,2 x 0,95 mWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side panels 165mmBottom ribbed for reinforcement.Incl. floor bearingAccessories optionalSurface evenness 0.2 - 0.4mm over 1000mm.- with drawer unit- Grid shelf- Heavy-duty castors steerableWelding accessories shown not included!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,19 tdimensions: 1,2 x 0,8 x 0,85 mSiegmund workstation including 2 drawersPremium Light, through hardened tool steel X8.7,plasma nitrided and BAR coated.Drilling Ø 28 mm, drilling surface 100x100 mm grid.Material thickness approx. 15 mmWith the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop!Consisting of:1x 004002 (Siegmund Workstation)1x 804004.X7 (perforated plate)1x 284030 (clamp holder)1x 004020 (shelf)1x 284035 (bolt and prism holder)1x 004025 (tool wall including shelf)2x 004210 (drawer)Spacer ring 800653.N is required for clamping with bolts 280510/280511. ...
number: 10 Stk.clamping range: 15 - 50 mm: 28 mmweight: 10 kgdimensions: 0,3 x 0,3 x 0,2 mBasic set 4 / 53 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps14 pcs. quick clamping bolts2 pcs. universal stop 100mm6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 pcs. universal stop 300mm6 stop and clamping angles 175mm4 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 106 Positionenweight: 283 kgcondition: neu : 28 mmSet 5: 125 pieces, 28mm system, consisting of:Ferrules: 14 x 280610.NFerrules: 10 x 280630.NPrism: 6 x 280648.1.NBolt: 36 x 160511Magnetic bolt 8 x 280740Stop: 12 x 280410.NStop: 12 x 280420.NStop: 4 x 280430.NAngle: 12 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NAngle: 1 x 280144.NAngle: 1 x 280146.NTrolley: 1 x 280910Accessory set. 1 x 283999Price information plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table dimensions: 1200 x 1200 mmtable load: 7000 Kgswivelling range: 105 Gradturning speeds: 0,07 x 0,6 U/minheight adjustment: 1450 - 2450 mmhollow spindle diameter: mmwelding current: 1000 Amperemax. torque on the faceplate: 14000 Nmtotal power requirement: 8,2 kWdimensions of the machine ca.: mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The data for this ...
Table dimensions: 1000 x 1000 mmtable load: 2500 Kgswivelling range: 105 Gradturning speeds: 0,15 - 2,0 U/minheight adjustment: 1010 - 1836 mmhollow spindle diameter: mmwelding current: 700 Amperemax. torque on the faceplate: 5000 Nmtotal power requirement: 6,0 kWdimensions of the machine ca.: mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The data for this ad ...
number: 53 Positionenweight: 45 kgcondition: neu 0Basic set 4 / 53 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps14 pcs. quick clamping bolts2 pcs. universal stop 100mm6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 pcs. universal stop 300mm6 stop and clamping angles 175mm4 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
