Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg

Used machine in good condition. Available for immediate delivery. - Pressure force: 60 t - Bending length: 2.080 mm - Axes: Y1 - Y2 - Z1 - Z2 - X - R - Distance between uprights: 1.750 mm - Working speed: 0-10 mm/seg - Returning speed: 180 mm/seg - Throat: 420 mm - Control: DELEM - Stroke max: 200 mm - Power: installed max: 11 kW - Weight: 4.900 kg - Dimensions (long x wide x high): 2.650 x 1.715 x 2.40 mm

This Trumpf TrumaBend V85S Bending machine was manufactured in the year 2003 in Austria. It is equipped with a Trumpf control unit and has 4 axis. The machine has a pressing force of 850 kN and a bending length of 2550 mm. ...

• more information

This TRUMPF TRUMABEND V85S Bending machine was manufactured in 1995 in Germany and has 51193 hours. It is equipped with a Trumpf TrumaBend control unit. The machine does not start, and probably the control system is broken. ...

• more information

Offer 23435 Specifications: - Max. working length 1270 mm - Column passage 1040 mm - Max. pressing force 500 kN - Distance table / ram 410 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed rapid traverse 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 10 mm/sec - Total drive power 8 kVA - Pneumatic connection 6 bar - Space requirement approx. W 2000 x H 2400 x D 2100 mm - Weight approx. 4800 kg - with: - CNC control DELEM , DA 65 - Y1 + 2 ; X ; R ; Z - Footswitch - Controlled back gauge with height adjustment 5 - 500 mm - 2 support arms - hydr. Tool clamping - Matrix table  ...

This TRUMPF TrumaBend V85X Bending machine was manufactured in 2003 in Germany. It has a press force of 850 kN and a bending length of 2050 mm. Free upright clearance is 1750 mm. The standard equipment covers a sturdy machine frame, pressure beam with high bending strength and CNC backgauge with rack and pinion drive for X- and R-axis. As special features the machine has an increased installation height and stroke by 150 mm each to 535 mm, a 5-axes backgauge system, a hydraulic and hardened upper tool clamping, a hydraulic lower tool clamping, CNC crowning, a BendGuard safety device, a support front console and control cabinet climatization (for 2-, 4-axis backgauge systems). It comes with a ...

Trumpf Press Brake Trumabend V170, 1700KN, stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,  ...

• more information

pressure: 85 t chamfer lenght: 2000 mm distance between columns: 1750 mm Control: TRUMPF Delem DA 65T total power requirement: 10 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m T R U M P F (Germany) CNC - Controlled Hydraulic Press Brake Model TRUMABEND V 85, year 1996 Serial No. 88 31 52 ______________________________________________________________________ ____________ Pressure, max. 85 to Working width, max. 2.050 mm Working width between columns 1,750 mm Side daylight of each column 410 mm Max. distance between upper and lower tool holder w/o tools 350 mm Adjustment of u ...

 ...

• more information

There is dripping oil problem on piston 85 Ton Folding length : 2500 mm ...

• more information