equipped with ATC = automatic toolchanger with 60 positions equipped with AVO = device for automatic pallet/table changer Transversal movement of table (X): 2000 mm Vertical movement of headstock (Y): 1250 mm / 1150 with pallet Horizontal movement of the stand (Z): 1000 mm Movement of spindle (W): 500 mm with Heidenhain measuring probe Longitudinal travel X-axe: 2000 mm Cross travel Y-axe: 1250 mm Travel Z-axe: 1000 mm Dimensions clamping space- table: 1400 x 1250 mm Power on spindle: 37 kW Admission in millinghead (ISO): ISO 50 (dia 125 mm) Max speedrange: 10 > 2800 rpm Control: Heidenhain TNC 426 Power needed (KVA): 78 kVa / 82 kW

X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.  ...

• more information

Catalog No. : 6346 Type: WHN 13 A Producer: TOS Made in: 1980 Characteristic: Control system: MEFI CNC 859 Length of the working table: 1600 mm Width of the working table: 1800 mm Maximum rotary speed of the spindle: 2800 1/min X-Axis travels: 2000 mm Y-Axis travels: 1600 mm Z-Axis travels: 1200 mm Power of the spindle: 38 kW Machine weight: 34.600 kg Replaced ball screws. Measuring each IRC axis separately. Drives separately each XYZ axis.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-axis: 1300 mm Table dimensions: 1800x1800 mm Control: ECS 2101 number of spindle speeds: 12,5 - 800 (63x) voltage: 380 V Control: total power requirement: 25 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control HEIDENHAIN TNC 355 Spindle diameter 100 mm x-travel 1130 mm y-travel 1250mm z-travel 950 mm Flange diameter of the hollow spindle 221.44 mm Table clamping area 1120 x 1000 mm Spindle mount ISO 50 size Mass of the workpiece 3000 kg Quill stroke 650 mm Spindle speeds 0 - 1500 rpm Feed speeds 4 - 2500 mm / min Rapid traverse 4.5 m / min Total power requirement 32kVA Weight of the machine approx. 14 t Dimensions L x W x H 4.75 x 2.45 x 3.03 m

CNC Heidenhain TNC 426 with handwheel HR 410 X = 3500 mm Y = 2500 mm Z = 1250 mm W = 800 mm Table dimensions 1800 x 2200 mm Spindle diameter 130 mm Max. spindle speeds 2500 RPM External coolant 2-axis manual milling head TOS HUR 50 year 2004 almost unused.  ...

• more information

The machine is in good technical condition. Working spindle diameter: 90mm Transverse table adjustment: 1120mm. After agreement, the possibility of testing. Accessories: digital measuring, angles. ...

• more information

The machine is in good technical condition, it is possible to test it by agreement. Work table 1800 x 1800mm. Machine dimensions: 7150 x 6280mm, height 5164mm. Main engine 80kW. ...

• more information

This TOS WHN 13.4A from Czech Republic was manufactured in 1985, is operated through a Heidenhain 355 control unit. It is equiped with 4 axis. ...

• more information

CNC table drill TOS WHN 13 with quill Built in 1991 Control FAGOR 8055 Travel xyzw 3500/1850/1330/600 mm Table size 1800 x1800 mm. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.  ...

• more information