Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall d ...

Double-sided fully automatic hydraulic cutting - milling - drilling machine PADE NST double-sided fully automatic hydraulic cutting - milling - drilling machine Production of chairs, tables, frames, and furniture parts Max work length 2100 mm Tilt-10° â +45° Rotation-10° â +50° 2 saw blades diameter 400 mm 2 drilling heads left, right can be rotated through 360 °, 8 spindle cross-shaped grid M2fi2 2 additional horizontal drilling heads from behind can be rotated by 360 °, 8 spindle cross-shaped grid 2 milling spindles bore wave 30 mm 1 motor for longitudinal adjustment of 1.5 kW 2 Saegemotore 2.2 kW 4 boring Motors 2.2 kW

Carriage length: 3200 mm; Cutting width at width stop: 1250 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 200 mm; Scorer: no; Height adjustment of saw blade: motorized; Swivel adjustment of saw blade: motorized; Adjustment of width stop: manual; Saw blade swivel range: 0Â to 45Â; Display saw blade angle: digital; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 550mm; Speeds: 3000 / 4000 / 5000 rpm; Engine power: 11 kW; Engine braking: yes / automatic; Suction connection: 100mm and 120mm; Machine length: 3600mm; Machine width: 2000mm; Weight: 1000kg; Made in Italy

Device: Double-cone mixer, Producer: COS.MEC ITALY Type: MB250, Year of production: 2001 Total capacity of the tank: 250L Speed control: 5-13 rpm ...

• more information

Band width: 150mm; Band length: 2170mm; Table size: 1440mm x 710mm; Veneer grinding device: yes; Oscillation: yes; Swivel table: yes, 0Â÷ 45Â; Suction connection: 120mm; Motor power: 3 kW; Machine length: 1440mm; Machine width: 800mm; Weight: 530kg; ...

• more information

Travel: 670mm; Hold-down: Exenterspaner; ...

• more information

Brand SASS Italy Model TRM 2200 Capacity 100 mm Spindle taper MT 6 Drilling depth 500 mm Spindle speed 18-1600 O-min. Horizontal movement 1845 mm Distance table spindle 2230 mm Colum diameter 550 mm T-slot base plate size 22 mm Floor dimensions 3500 x 1250 mm Power 11 Kw Weight 9000 Kg Dimensions L x W x H 3500 x1250 x 3700mm Extra Block table angle adjustable 760 x 1000 x 600 mm Blok table 1000 x 1000 x 600 mm

Working width: 530 mm; Planing shaft: tersa; Number of knives: 4; dressing table length: 2900 mm; Dressing table adjustment: lever; Hollow and pointed joint adjustment: no; Display Spahnabnahme: Scala; Hollow and pointed joint display: -; Dressing stop angle adjustable: yes; Motor power: 5.5 kW; Machine length: 2900 mm; Machine width: 1000mm; Weight: 810 kg; made in Italy

Code: 0135 Brand: CPL - ITALY Model: IF Cut- off milling machine for making parallel joints on drawers, various parts of furniture, wine and liquor boxes, cigar boxes, gift boxes and beehives for beekeeping Technical data: The parts are machined in packs automatically. Depending on the type of milling cutters, different types of joints can be made Working width mm 450 Unlimited working length Sawing unit: Blade diameter mm 250 - Motor Hp 4,5 - Blade transversal adjustment Cutter group: Diameter mm 180 - Motor Hp 7,5 N: 2 pneumatic clamping presses Operating pressure 7 Atm Overall dimensions: mm 1000 x 1100 x 1450 h Weight kg 720

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display planing thickness: mech. Counting display; Feed speed: 7-11-15-19; Feed roller: steel articulated; Pressure beams: articulated; Pull-out roller: rubber; Table rollers: yes, driven; Table extension: Yes inlet and outlet; Engine power: 7.5 kW; Suction connection: 160mm; Machine length: 1070mm; Machine width: 900 mm; Weight: 750kg;