Immediately available from location : CNC lathe TRAUB Type TND 300 Built in 1991 CNC control TX 8 F Spindle bore 42 mm Circulation over bed 400 mm Circulation via flat carriage 170 Revolver 12 speed 6 powered tools Tailstock Turning length 500 mm Lining 160 mm Drive power 18 kw Spindle speeds 56 – 5600 rpm Drive driven tools 3 / 5 kw Speed driven tools 6000 rpm Conveyor Coolant system Weight 3.8 tons Dimensions: 2498/1990/2005 mm Prior sale and errors excepted. The machine is sold as it stands in the hall. The buyer can view the machine under power with connection options. Currently, it is not energized.

TRAUB TND 400 CNC Lathe, used - machine no.: 192 - operating voltage: 380 V - frequency: 50 Hz - control voltage: 22 V - valve voltage: 24 V - coupling voltage: 24 V - total nominal current: 102 A - total connected load: 48 kW - read off operating hours: 48739 - control system: TRAUB SYSTEM TX 8F - spindle passage: 65 mm - clamping chuck diameter: 200/250 mm - turning diameter over cross slide: 240 mm - turning diameter over bed: 480/170 - turning length: 800 mm - tool holders in turret: 12 pieces for cylinder shaft 40 x 63 mm - slide travel cross: 220 mm - slide travel length: 850 mm - rapid traverse cross: 10000 mm/min - rapid traverse longitudinal: 20000 mm/min - spee ...

High Quality CNC Lathe Traub TND 360 We offer a precision CNC lathe from the renowned Traub brand. The Traub TND 360 was manufactured in 1981 and allows for efficient and accurate machining, which meets current requirements Technical details: - Diameter: 360 mm - Turning length: 800 mm - Tailstock: MT 3, hydraulically operated - Revolver: 8 stations - Power consumption: 380V, 32 kW This CNC lathe stands out for its reliability and precision, allowing versatile machining of workpieces. The machine needs an inspection due to an unknown problem in the control system. It is also in very good condition and has been regularly maintained. The price is net, free to load. The T ...

Description: Including: Palletizing system (in need of repair) Technical data: Tool turret: 12-station turret head Control: TRAUB TX8F Spindle clearance: 65 mm Total power requirement: 52 kW Speed range: 40 - 4000 rpm Turning length: 800 mm Turning diameter: 240 mm Turning diameter: 400 / 170 mm turning diameter: 240 mm, Drehlänge: 800 mm, control: TRAUB TX8F, toolchanger positions: 12, number of places for driven tools: 6, spindle bore: 65 mm, turning speed range: 40 - 4000 rpm, total power requirement: 52 kW, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 6,000 x 3,500 x 2,200 mm

Hollow spindle opening diameter: 42mm, rotational speed: 56-5600/min, controls: SYSTEM TX 8F, length: 2498mm, width: 1990mm, height: 2005mm, weight: 3.8t, operational hours: 38,274h, with driven tools, various tool holders VDI30, high pressure pump, the Drive Baumüller BUH-4-55-6-002 shows an error message and has to be overhauled.

Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.

TRAUB Sonim TND 200 CNC Lathe YOM 1994 CNC Lathe – Inclined Bed Type TRAUB TX8F CNC control Turning diameter 350 mm Turning length 200 mm Total power requirement 20 kW Turning diameter over bed slide 200 mm X-axis 180 mm Z-axis 300 mm Spindle bore 42 mm Spindle motor 12 kW Spindle turning speed range 10 – 5000 rpm Feed speed X:155, Z:250 mm/min Rapid Travel Speed X-Axis 15 m/min Rapid Travel Speed Z-Axis 25 m/min Weight of the machine ca. 4 t Dimensions of the machine ca. 6.5 × 1.5 × 1.75 m 12-fold revolving head Traub Bar loader 3-fold power chuck Chip conveyer

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: TRAUB SYSTEM TX 8i-p Operating hours: 46441 Technical data Number of axis total: 7 Number of spindles: 2 Turning length: 180 mm Number of axis total Max. bar diameter: 20 mm Spindle speeds: stepless up to: 8000 rpm Longitudinal travel (Z-axis): 205 mm C axis (spindle,resolution): 0.001 ° Back spindle: up to: 6400 rpm C axis (spindle,resolution): 0.001 ° Turret slide: number: 2 Upper turret head: number of tools: 8 number of driven tools: 8 Spindle speeds (turning tools): 12000 rpm X axis: 120 mm Lower turret head: number of tools: 7 number of ...

Turning diameter: 175 mm Turning length: 650 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 12   CNC Brand: Traub CNC Model: TX8i-S X-Axis:          175mm Y-Axis:          40mm Z-Axis:          650mm Spindle bore:    65mm Speedrange:      5000Rpm Spindle power:   24kW Subspindle speeds:7000Rpm Subspindle bore: 42mm Subspindle power:28kW Length:          6.500 mm  Width:           2.400 mm  Height:          2.400 mm  Weight:          ...

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price  ...

• more information