– Italian production – transverse aggregate, the so-called sergeant – year of manufacture 2011 – electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum element length 365 mm vacuum table 1 unit: transverse tape, the so-called sergeant engine power 12 kW 2 aggregate: rubber shaft hardness 95 shore diameter 240 mm engine power 18.5 kW 3 aggregate: rubber shaft hardness 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 unit – cleaning brush 2.2 kW 6 aggregate – blowing blowing on the tape pneumatic oscillation feed  ...

– after technical inspection TECHNICAL PARAMETERS: .max. workpiece width 110 cm .max. workpiece height 16 cm 2 aggregates: 1) AGGREGATE RUBBER roller 2) aggregate with combo boot with pneumatic pressure rollers, rubber, pressure between aggregates oscillation of pneumatic tapes automatic belt centering system potentiometer for setting the planing thickness FEED SPEED SMOOTHLY ADJUSTABLE power of the first unit 18,5 kW power of the second unit 11 kW working pressure 6-8 bar extraction connection diameter 2 x 250 mm dimensions (L/W/H) 195 / 185 / 215 cm weight 1750 kg

Manufacturer: DMC, Type: Unisand K USK 1350 M3, Year: 2011, Software: DMC, Monting of the machine: Walze/Walze/Schuh, Sanding width mm: 1350, Number of sanding belts: 3, Rubber roller: 2, Längsschleifaggregate: 3, Weight in kg: 5350, Year :2011 ...

• more information

Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994

Manufacturer: DMC, Type: Topsand, Monting of the machine: Walze/Walze/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Steel roller: 1, Shore roller 2: 70, Längsschleifaggregate: ca.30, Belt 2 shoe unit: 22, Belt 2 synchronous and reverse run: 17, Combi unit roller/shoe: 5-25, Table hight adjustment by engine: ca.2, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Vacuum table: yes,

Manufacturer: DMC, Type: UNISAND K/USK1100M3, Year: 2007, Monting of the machine: L/L/L , Equipment of machine 2: L/L/L, Double sided sanding line: yes, Sanding width mm: 1100, Number of sanding belts: 3 + 3, Weight in kg: 4050, Year :2007 ...

• more information

SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER DMC MOD. UNISAND 2000-I M3 - CE RULES - bottom machine: steel roller diam. 250 mmm. - motor 25 kw rubber roller diam. 320 mm. - motor 18.5 kw rubber roller diam. 320 mm. - motor 15 Kw pressers shoes on/off - top machine: steel roller diam. 250 mmm. - motor 25 kw rubber roller diam. 320 mm. - motor 18.5 kw rubber roller diam. 320 mm. - motor 15 Kw pressers shoes on/off - working widht mm. 1350 mm. - control panel - vacuum - s/n SA/004163 - year 2000

Description: Max. machining width 1350 mm Min. machining thickness 4 mm Max. machining thickness 200 mm Forward feed belt , with speed adjustment by NC Motor power 4 KW Fan for belt vacuum hold down , no. fans 1 Operating units 5 OPERATING UNITS 1 Unit : sander unit : band OPERATING UNITS 2 Unit : roller unit : in rubber roller diameter : 320 mm motor power : 15 KW sanding belt width : 1370 sanding belt extension : 2620 OPERATING UNITS 3 Unit : pad Pad : vertical Segmented pad : , With superfinishing belt , with adjustable speed by NC , motor power : 15 KW sanding belt width : 1370 sanding belt extension : 2620 OPERATING UNITS 4 Unit : brush unit : top brush diameter : 20 ...

Description: serial number: SA/004186 Technical specifications: sanding width approx. 1350 mm workpiece thickness from 4 mm up to 170 mm vacuum transport belt, vacuum unit power 7,5 kW belt conveyor with variable feed speed: 3,5-18 m/min feed motor power 2,2 kW aggregate 1: longitudinal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 1370 x 2620 mm, motor power 15 kW variable sanding belt speed: max 18 m/sec aggregate 2: longitudinal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 1370 x 2620 mm, motor power 15 kW variable sanding belt speed: max 18 m/sec aggregate 3: longitudin ...

DMC DL 8T 2 axis cnc lathe Fanuc control unit Swing over Bed(Max. wing dia.): 480 mm Max. Turning Dia.: 280 mm Machine is in excellent condition ...

• more information