Hydraulic Press SCHULER HYDRAP 315 Manufacturer: SCHULER Model: HPDZb 3150-3000/1300 New in: 2001 Condition: Very good Technical details Press capacity: 315 T Table dimensions: 3 000 x 1 300 mm Min. die stamping dimensions: 2 000 x 866 mm Slide stroke: 800 mm Max. shut height: 1 300 mm Number of strokes per min (regulated): 13-46 Cusion capacity: 160 T Cusion stroke: 200 mm

pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:100 t throat:315 mm stroke:30 - 160 mm no. of strokes:40 /min distance table/ram, max. stroke up, adjustment up:460 mm table surface area:910 x 680 mm Hole in the table:400 mm table height over floor:800 mm passage to the back:400 mm ram surface:630 x 400 mm ram adjustment:80 mm power requirement:7,5 kW weight:7,5 t dimensions (WxDxH):1,7 x 2,0 x 3,0 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical ram counterbalance:pneumatic

pressure:3500 t stroke:900 mm Distance table / ram, stroke down:1000 mm distance table / ram, stroke up:1900 mm table surface area:3150 x 2150 mm ram surface:3150 x 2150 mm Total Weight of Tool max.:30,0 t Weight of Tool Top Part max.:20,0 t speed down:400 mm/s working speed:0,9 - 9,2 mm/s Hydraulic Operating Pressure:280 bar oil volume:5500 l rated current:760 A voltage:400 V frequency:50 Hz power requirement:425 kW weight:231,0 t

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm  ...

• more information

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the a ...

very fast Eccentric press, make SCHULER , tested , electrically connected Type PDv 25/200 Masch.-No. 70/32.0610/9 Technical data: Power 25 to Number of strokes approx. 180 /min Extension 200 mm Impact stroke 8 - 80 mm Shock sift creation approx. 60 mm Table size approx. 570 x 410 mm Installation height approx. 310 mm (measured with mounted clamping plate) Width x Depth approx. 1.1 x 1.35 m plus control cabinet Height approx. 2.15 m Engine power 3 kW Weight estimated approx. 1.5 to

sheet width: 5 mm plate thickness: 1000 mm distance between columns: mm total power requirement: 4 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Condition: very good Control system: Siemens Technical details : Machine type: SH-200-2.7 x 1.7 Fabrication No.: P/100010 Year: 2005 TOTAL PRESS WEIGHT: 37300 kg Nominal force: 2000 kN Stroke length max.: 900 mm Installation height: 1400 mm Closing speed: 400 mm/s Working speed max.: 84 mm/s Working speed at nominal force: 30 mm/s Tool footprint max.: 2700 x 1500 mm Tool footprint min.: At nominal force: 1600 x 1100 mm Tool height min.: 500 mm Total tool weight max.: 15 000 kg Tool upper part weight max. : 7500 kg Permitted External load : left-right 30 kNm Permitted Except Load : front-rear 15kNm Installed capacity: 87 kW Rated current: 155 A Tension: 400 V Frequ ...

YOM: 5.1987 / 2003 - the press was generally renovated by the manufacturer Schuler, along with the replacement of electrics, cables and controls for Siemens Condition: Very good Technical details: Pressing force: 5000 kN, 500 tone Table dimensions: 1500 x 1400 mm Distance from Clamping surface to ram: 1250 mm Distance from the clamping table to the hold-down device min.405 mm, max.605 mm Clamping surface thickness: 335 mm Number of flutes, dimensions: H12 DIN 650, 36 mm Ram size Stroke:: 500 mm Hold-down size Stroke: 200 mm Press height / weight: 5800 mm / 45 tone