Hardly used ( year of construction 2021) Metal Band Saw with Swivel Frame from Optimum OPTIsaw S 300DG Specifications Saw blade 2750 x 27 x 0.9 mm Saw blade speed 35 + 70m/min Cutting angle -60 – +45° Cutting range 0° round 255mm Square 190mm rectangle horizontal 190 x 310mm Cutting range -45° round 220 mm Square 190mm rectangle horizontal 135 x 190mm Cutting range -60° round 135mm square 135 mm rectangle horizontal 135 x 135mm Drive power 1.5 KW - 400 Volt Weight 335 kg Dimensions (LxWxH) 1680 x 1600 x 1300 mm Scope of delivery: material stop, bi-metal saw blade, machine base, coolant pump Properties Double mitre up to ...

 ...

• more information

Drill, drill press, pillar drill, pillar drill, tapping machine, tapping machine, -Manufacturer: Optimum, column drilling machine type B 30 BS Vario -Motor: 2.2 kw -Speeds: 30 - 3900 rpm, infinitely variable -Table size: 355 x 330 mm, travel 640 mm -Spindle mount: MK3 -Spindle stroke: 130 mm -Projection: 280 mm -Columns Ø: 115 mm -Thread cutting device -Coolant device -Quill stiff, does not retract again by spring force -Dimensions: 740/420/H1860 mm -Weight: approx. 253 kg

Description: Bench drill - Left/right rotation Drilling capacity in steel 25 mm Projection 180 mm Drilling stroke 80 mm Speed 200 - 2240 rpm Table mm Total power requirement 0.75 / 400 kW / volt Tool holder 2 Machine weight approx. 80 kg Dimensions L x W x H 0.5 x 0.3 x 1000 m Approx. Onsite Dimension. (l x w x h): 500 x 300 x 1,000 mm, weight approx.: 70 kg

cutting diameter: 225 mm saw band length: 2480 mm cutting width: 160 mm dimensions of saw-band: 2480 x 27 x 0,9 mm mitter cutting: 60 ° cutting speed: 20 - 90 m/min power capacity: 1,5 kW voltage: 230 V coolant: total power requirement: 1,6 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 0,70 x 1,40 x 1,40 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Opti B17Pro Bench drilling machine 5 speeds Drilling capacity in steel 16 mm Motor 500W 230V Spindle retainer MK2 Drilling table Tilt/Swivel +-45° / 360° Net weight: 39kg Table length: 235 mm Table width: 220 mm G & pieces 3003171SE  ...

• more information

Pillars - or drilling machines Smoothness thanks to polished splined hubs High concentricity by hardened and ground spindle Large speed range Heavy, solid casting Drilling depth stop adjustable with millimetre scale Low maintenance gearbox with grease lubrication Electrical connection: 400 V / 3 pH 50 Hz Engine power: 1,1 / 1,5 kW Drilling capacity in steel: Diameter 28 mm Spindle retainer: MK 3 Projection/Quill stroke: 260 mm / 127 mm Spindle speeds/levels: 75 - 2900 min-1/8 Table length x width / T-slots: 376 x 394 mm / 14 mm Column diameter: 92 mm Dimensions Lxwxh: 670 x 550 x 2, 080mm Net weight: 184 kg G & pieces 3034230

Table length: 1650 mm Table width: 360 mm Longitudinal X: 1270 mm Cross Y: 280 mm Vertical Z: 400 mm OPTIMUM - OPTImill MT 200 Universal milling machine 1290 x 280 x 400 mm MACH - ID 6340 Make: OPTIMUM Type: OPTImill MT 200 YOP: 2013 X-Axis    1.270 mm Y-Axis       280 mm Z-Axis       400 mm Table Length       1.650 mm Table Width          360 mm Table load             450 kg Spindle speeds      1750 Rpm Feed rate X-Axis      420 mm Feed rate Y-Axis       393 ...

Machine  ...

• more information

Motor power: 1.1kW/230V; Cutting area: 100mm x 145mm; Feed: infinitely variable; Band saw speed: 22 / 31 / 55 m/min; Band saw dimensions: 1638 x 13 x 0.65 mm; Cutting angle: -45Â to 60Â; Dimension: 1085mm x 498mm x 978mm; Weight: 78kg; Circuit breaker for the belt cover and the saw blade cover in low-voltage version Separate emergency stop Impact switch low-voltage electronics 24 V Low-noise running Mobile machine base Ball-bearing saw blade guide Three speed levels for a wide range of material selection Microswitch for automatic limit shutdown Easy-to-read angle adjustment scale Standard with high-quality bi-metal band saw Saw blade tension adjustable on the front side via handwh ...