We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Length: 5.25 m, 2 cm height, 3 teeth per 1 inch, Ready to saw: toothed, set, ground - ready for use, endlessly welded ...
Gebr. Band saw NRA (AGAZZANI) Model 600 YOC 1997 Motor power: 2.2 kW (380V) Nominal current: 5 A Roll diameter: 60 cm max. cutting width: 58 cm max. cutting height: 38.5 cm Saw blade length: min. 4,620 mm / max. 4,720 mm Blade tension indicator Engine Brake Limit Switch Faces Doors Table swivel device with handwheel (can be swivelled up to 45°) Roller guide top + bottom APA (Panhans) Rip fence incl. 4 band saw blades Extraction connection: 2 x 100 mm Dimensions (approx. dimensions): W. 110 cm D: 76cm H: 212 cm Weight: 274 kg
Technische Daten: - min./max. Sägebandbreite 15 - 200 mm - Zahnteilung 5 - 60 mm - Zahnhöhe max. 30 mm - Zahnformen PV, NV, KV - Spanwinkel - 10C / + 30C - Blattstärke 0,6 - 3,2 mm - Vorschubgeschwindigkeit 0-30 Zähne / min. (Drehzahlgeregelt über Potentiometer) - Schleifscheiben Durchmesser 200 mm - Schleifscheiben Bohrung Durchmesser 20 mm - Schleifscheinendicke 10 mm - Drehzahl stufenlos einstellbar 1400 - 4500 Upm - Spannung 400 V / 50 Hz - Gesamtanschluß 1,2 kW - automatisches präzises Schleifen - Wasserkühlung - Mikroprocessor Steuerung - 24 V Steuerpaneel - 8 Stufen Drehzahlgeregelte Vorschubgeschwindigkeit - THK - Linearführungen - integrierte Maschinenbeleuchtung - Abmessun ...
Technische Daten: - min./max. Sägebandbreite 15 - 250 mm - Zahnteilung 0 - 60 mm - zahnhöhe max. 25 mm - Zahnformen PV, NV, KV, SB - Spanwinkel - 10C / + 30C - Blattstärke 0,6 - 3,2 mm - Vorschubgeschwindigkeit 12/90 Zähne / min.(8 Stufen Drehzahlgeregelt) - Schleifscheiben Durchmesser 200 mm - Schleifscheiben Bohrung Durchmesser 20 mm - Schleifscheinendicke 10 mm - Drehzahl stufenlos einstellbar 1400 - 4500 Upm - Spannung 400 V / 50 Hz - Gesamtanschluß 1,5 kW - automatisches präzises Schleifen - Schutzkabine - Wasserkühlung - Mikroprocessor Steuerung - 24 V Steuerpaneel - 8 Stufen Drehzahlgeregelte Vorschubgeschwindigkeit - THK - Linearführungen - integrierte Maschinenbeleuchtung - ...
Package press and strapping system make FROMM with 19 mm Plastic tape, with timber insertion, package roller before the press, bar patrons and cross conveyors, package delivery sponsor behind the press. (Driving with and without timber is possible!) Complete control with Control Panel, hydraulic power pack. Very good condition, used little! Year of manufacture 2004
width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 200 x 32 mm grinding wheel hole diameter: 30 mm total power requirement: 0,9 kW weight of the machine ca.: 35 Kg dimensions of the machine ca.: 620 x 540 x 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mm band length: 1220 mm dimensions of grinding wheel: 225 mm work table:: 150 x 400 mm Table tiltable up to: 90 Grad table surface area: 150 x 130 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 35 Kg dimensions of the machine ca.: 650 x 360 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 100 x 915 mm work table:: 225 x 155 mm total power requirement: 0,44 kW weight of the machine ca.: 0,018 t dimensions of the machine ca.: 0,56 x 0,26 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Equipments: Checked and cleaned good condition without any damage ...