Manufacturer: Fryma Fryma Model: MZM/VK - 25 Year : 1999 Type : Vacuum mixer for pilot production   Filling volume : Total volume: 48 L Useful volume: 7 L - 25 L Jacketed: 4.5 L max   Recommended operating pressure : Vessel chamber : - 1 to 0 bars Jacket: 2.4 bar Operating temperature : Vessel chamber: 80?C Jacket chamber: 140?C   Protection: safety valve Parts in contact with the product: stainless steel 1.4401 / AISI 316 Homogeniser motor power: 5.5 kW   Vacuum pump : Type : Lema 25 Brand : Sihi Vacuum capacity: 16 m3/h Water requirement: 0.26 m3/h   Product pump : Type :  ...

SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - No. 3 cnc axis - Cutting section 1300x800 h 100 mm - Angle of cut 90°+/- - Wheels diameter 900 mm -Volt. 380/50 - S/W 06 - CE rules (year 1998)  ...

• more information

SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - sn 06 - CE rules (year 1998)  ...

• more information

Technische Daten: - min./max. Sägebandbreite 15 - 200 mm - Zahnteilung 5 - 60 mm - Zahnhöhe max. 30 mm - Zahnformen PV, NV, KV - Spanwinkel - 10C / + 30C - Blattstärke 0,6 - 3,2 mm - Vorschubgeschwindigkeit 0-30 Zähne / min. (Drehzahlgeregelt über Potentiometer) - Schleifscheiben Durchmesser 200 mm - Schleifscheiben Bohrung Durchmesser 20 mm - Schleifscheinendicke 10 mm - Drehzahl stufenlos einstellbar 1400 - 4500 Upm - Spannung 400 V / 50 Hz - Gesamtanschluß 1,2 kW - automatisches präzises Schleifen - Wasserkühlung - Mikroprocessor Steuerung - 24 V Steuerpaneel - 8 Stufen Drehzahlgeregelte Vorschubgeschwindigkeit - THK - Linearführungen - integrierte Maschinenbeleuchtung - Abmessun ...

Technische Daten: - min./max. Sägebandbreite 15 - 250 mm - Zahnteilung 0 - 60 mm - zahnhöhe max. 25 mm - Zahnformen PV, NV, KV, SB - Spanwinkel - 10C / + 30C - Blattstärke 0,6 - 3,2 mm - Vorschubgeschwindigkeit 12/90 Zähne / min.(8 Stufen Drehzahlgeregelt) - Schleifscheiben Durchmesser 200 mm - Schleifscheiben Bohrung Durchmesser 20 mm - Schleifscheinendicke 10 mm - Drehzahl stufenlos einstellbar 1400 - 4500 Upm - Spannung 400 V / 50 Hz - Gesamtanschluß 1,5 kW - automatisches präzises Schleifen - Schutzkabine - Wasserkühlung - Mikroprocessor Steuerung - 24 V Steuerpaneel - 8 Stufen Drehzahlgeregelte Vorschubgeschwindigkeit - THK - Linearführungen - integrierte Maschinenbeleuchtung -  ...

Infeed with electric box 5 bands (a curve band)  ...

• more information

Package press and strapping system make FROMM with 19 mm Plastic tape, with timber insertion, package roller before the press, bar patrons and cross conveyors, package delivery sponsor behind the press. (Driving with and without timber is possible!) Complete control with Control Panel, hydraulic power pack. Very good condition, used little! Year of manufacture 2004

width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 200 x 32 mm grinding wheel hole diameter: 30 mm total power requirement: 0,9 kW weight of the machine ca.: 35 Kg dimensions of the machine ca.: 620 x 540 x 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 1220 mm dimensions of grinding wheel: 225 mm work table:: 150 x 400 mm Table tiltable up to: 90 Grad table surface area: 150 x 130 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 35 Kg dimensions of the machine ca.: 650 x 360 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 100 x 915 mm work table:: 225 x 155 mm total power requirement: 0,44 kW weight of the machine ca.: 0,018 t dimensions of the machine ca.: 0,56 x 0,26 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.