Overview The PET bottling line mainly contains machines from Krones and Meypack and was installed in 2011 in a German mineral water company. It was operated in the same location with a returnable PET bottling line and the two lines were sharing the same filler. Therefore the number of operating hours on the machines of this line are very low, as mainly returnable PET bottles were produced. The filler will we kept inside the returnable PET bottling line, therefore the line is sold without a filler. As the sales volume of non-returnable PET has reduced further, the line is stopped and for sale. All machines are still assembled and electrically connected.   Tech Specs: Capacity 20,000 bph, at  ...

The machine packs in full cartons or trays. Capacity up to 80 cartons per minute. The change to the new carton format takes place from the operator panel - very quickly. Siemens S-7 control. Machine dimensions: Length: 9m Maximum width: 3.2m Height: 2.4 m. Weight: 3.5 tonnes The machine is equipped with a set of necessary spare parts for 2-3 years of operation. The machine after complete renovation in very good condition. Ready to work. We provide 12 months warranty. The condition of the machine and the level of modernity ensure many years of operation.

with Siemens S7 electrics By ordering, we will completely overhaul the machine and set it up to your tray size and your bottle/can type.  ...

• more information

Speed: 18m/min, heating output: 1.35kW, length: 2750mm, width: 976mm, weight: 650kg, including documentation, spare parts and accessories. ...

• more information

Packaging system, make Meypack, type VP452, year of construction 2006, Type of packaging: tray, tray/lid, Maximum output: 30 packs/min., Machine data:, Inlet height: 1,150 mm, Outlet height: 650 mm, Dimensions of the possible multipack:, L x W x H: 200-400mm x 120-300mm x 80-350mm, Cutting dimensions: L x W: 360 – 1,400 mm x 300 – 700 mm with Nordson hot melt device, ProBlue P/N213 544C

Triblok PET filling machine 12000 bph 0.33 L 24/32/6 year 2005, very good condition ...

• more information

Bottling Line | KRONES • Year: 2003 – 2018 • Speed: 14.000 BPH • Direction: Clockwise • Blower KRONES C310 o 10 cavities o Preforms tilter and hopper o Stamp: 0.50L – 0.90L – 1L – 1.5L – 1.5L – 2L • Isobaric filling monoblock BC 70.70.10 • Rinser 70 clamps • Filler 70 valves • Capper 10 heads – Cap Alaska (3P) and BPF 28mm • Labeller KRONES 18 heads – Roll fed • Air conveyors ZECCHETTI • Ozonator • Caps elevator • Saturator • CIP system • Dryer bottles • Bottle inspector (label - cap - level) • Laser marker • Accumulation table • SYMPAK shrinkwrapper • Devider (da 1 o 2 file) • Palletizer SYMPAK • Pallet w ...

Bottling line PET ISO | 15.000 bph Year: 2001 – 2012 Blowing machine SMI SR10 | 2010 Formats of 05L-1L-1.5L Cap 28 mm PCO CORVAGLIA e 267 NOVEMBAL ALASKA 10 cavities Filling monoblock MELEGARI 50.70.10 | 2001 Rinser 50 clamps Filler 70 valves | isobaric Capper 10 heads Carbonator MELEGARI Labeller P.E. rollfed | 2012 12 heads Shrink wrapper SMI SK 600F | 2001 Handler SMI MAB 60 | 2001 Palletizer EMMETI | 2001 Air conveyors ZECCHETTI | 2001 Safety protections on all machines

Bottling line isobaric PET/glass Year: 2000 - 2013 Speed: PET: 6.000 bph Vetro: 8.000 bph Blower SIAPI - 2000 Preform tilter – 2012 ZECCHETTI air conveyors – 2000 Depalletizer SYMPAK - 2003 Filling monoblock BC 42.50.10 – 2000 Ozonator – 2000 Caps elevator – 2000 Deareator and Saturator BC– 2000 Labeller KOSME cold glue and hot melt for glass – 2000 Labeller P.E. hot melt for PET - 2003 Bottle inspector (cap level label) – 2000 Inkjet VIDEOJET – 2013 Devider (1 to 2 rows) – 2003 Shrink wrapper DIMAC – 2000 Handler TWINPACK – 2000 Wraparound DIMAC – 2003 Box conveyors - 2003 Palletizer KEBER – 2000 Pallet wrapper – 2000

Liquid and Viscous Products Filling Line Model: 2021 Model Combo (filling, capping, labeling, collection tray) full filling line. Control: Touch PLC screen Electricity Supply: 3 Phase 380 Volt / 50 Hz Filling System: Hydraulic unit. Product feeding: The machine automatically fills its own reservoir. Products that can be filled: It fills liquid or all kinds of viscous products. Filling Capacity: 10 ml 250 ml. Capacity: 1200 – 1800 Pieces / Hour (Software supported for 500 ml filling if desired) Closing Module: It closes all the covers including the triggers. Packing feeding manual. Automatic filling, capping and labeling. Filling line structure: Chrome stainless quality