Description: serial number: 161 control: FANUC Series 18i-TB  , main spindle: bar passage diameter: 13 mm (16 mm) spindle bore: 17 mm motor power: 3.7 / 5.5 kW max. speed: 12000 rpm  , headstock: headstock stroke: 130 mm  , pick-up spindle: bar passage diameter: 13 mm (16 mm) spindle bore: 17 mm motor power: 2.2 / 3.7 kW max. speed: 12000 rpm max. clamping depth: 95 mm max. part length with workpiece pick-up: 130 mm  , tool carrier internal machining: number of slides: 1 travels: X-axis: 2 x 30 mm Y-axis: 135 mm number of tool positions: 2 x 4 cross-section of turning tools: 12 x 12 mm  , driven tools: number of tool positions: 3 ...

Description: serial number: 154 control: FANUC Series 18i-TB  , main spindle: bar passage diameter: 13 mm (16 mm) spindle bore: 17 mm motor power: 3.7 / 5.5 kW max. speed: 12000 rpm  , headstock: headstock stroke: 130 mm  , pick-up spindle: bar passage diameter: 13 mm (16 mm) spindle bore: 17 mm motor power: 2.2 / 3.7 kW max. speed: 12000 rpm max. clamping depth: 95 mm max. part length with workpiece pick-up: 130 mm  , tool carrier internal machining: number of slides: 1 travels: X-axis: 2 x 30 mm Y-axis: 135 mm number of tool positions: 2 x 4 cross-section of turning tools: 12 x 12 mm  , driven tools: number of tool positions: 3 ...

MANURHIN KMX SWING 720 CNC lathe was built in 2004 in France. The automatic lathe is used for precision machining of workpieces with a maximum length of 2500 mm and a diameter of 20 mm, in ten axes. The high quality of the workmanship, high turning precision and reliability of the turning centre, will satisfy even the most demanding customers. The KMX SWING 720 swiss type lathe guarantees the possibility of performing a wide range of metal machining, thanks to the use of a main spindle together with a sub spindle rotating at a maximum speed of 10000 rpm. The machining tools are stored in a magazine with a capacity of up to 14 pieces and they are changed in a very short time. The lathe  ...

Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamp ...

Turret lathe make MANURHIN type Dekomat 50Mash. -No: 3005-157Spindle bore: 50 mmgr. rod cover: 42 mmgr. Diameter of the chuck: 160 mmGr. working diameter: 120 mmSpindle drive pol. Engine: 4/8 hpNumber of programmed speeds: 4Number of speed groups: 5Speed range: 75 - 3200 rpm.Number of turret positions: 8long stroke: 150 mmLarge planing stroke: 49.7 mmgr. Radius difference when copying: 17 mmNumber of longitudinal feeds per cycle: 3 (+ 4 )Number of feedrates per cycle: 2 (+ 1 )Feed range longitudinal: 0-425 mm / minFeed range flat: 0-150 mm / minRapid traverse: 7 mm / minExternal dimensions without bar feed: 2300 x 1200 x 1500 mmWeight: 2000 kgWith- separate control cabinet- Connector panel c ...

turning diameter:33 mm turning length:330 mm control: 840 total power requirement:20 kW weight of the machine ca.:6 t dimensions of the machine ca.:3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours

Description: - Maximum bar capacity: 32 mm - Spindle bore: 37 mm - Maximum spindle speed: 8,000 rpm - Headstock stroke: 390 mm - Bar feeder: IEMCA TS 560/40 - Installation dimensions bar loader: 6300 x 2000 x 12000 mm - Type: For single-spindle lathes - Maximum bar diameter: 70 mm - Maximum bar length: 4000 mm weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 1,800 x 2,300 mm

with rod pipe  ...

• more information

Manurhin 65 ton x 2550 mm Capacity: 65 ton x 2550 mm Passage between uprights: 2050 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 255 mm Table width: 190 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 50 mm/sec Electric motor (power): 7,5 HP Weight: 5 ton

Jeros 6015 TRAY CLEANING MACHINES  ...

• more information