We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Closing unit Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1200 x 1100 Clearance between columns (hxv) [mm] 870 x 710 Min./max. mold height [mm] 380/820 Maximum opening width [mm] 1530 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Injection weight [g] 690 Injection pressure [bar] 1905 Electrical and hydraulic equipment Rated power of the pump motor [kW] 45 Heater power [kW] 23 Dimensions and weight Net weight with control cabinet [t] 20 Dimensions (length x width x height) [m] 7.9 x 2.2 x 2.5
This DEMAG ERGOTECH 4200-2300 Injection Moulding Machine was built in the year 1995 and has 25000 production hours. It is equipped with a Wittmann handling. The machine has a clamping force of 4200 kN and a screw diameter of 70 mm. It comes with 2 core pullers. ...
Demag hose pouring machine type: Ergotech 500-200 systems control: NC 4 construction year: In 1999 Schliesseinheit Schliesskraft t: 50 opening ways mm: 400 cross-beam measure mm: 355 installation heights min / max. mm: 210 record size: 520 x 520 hose unity snail diameter mm: 30 hose weights gr: 94 hose volumes cm?: 106 hose pressure cash: In 1995 mass and weights dimensions LxBxH m: 3.6 x 1.4 x 1.8 machine weight kg: 2900 other 1 x nuclear trains
Molding machine of Mag Type: Ergotech 50-200 Control Panel: NC 4 year of construction: 1993 Clamping unit Clamping force t 50 Gap mm: 400 Holm dimension mm: 320 x 320 min/max height mm: 210 Plate size: 530 x 540 Injection unit Screw diameter mm: Gr 25 injection weight: 54 Injection volume cm m³: 61.3 Spray pressure bar: 2740 Dimensions and weights Dimensions Lxwxh m: 3.7 X 1.4 X 1.7 machine weight kg: 3250 Miscellaneous HEATING CHANNEL CONTROL 4 COMPARTMENT
Molding machine of Mag Type: Ergotech 60/420-310 system control: NC 4 year of construction: 1999 Clamping unit Clamping force t 60 Gap mm: 450 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 600 x 600 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168 Spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 4.1 x 1.36 x 1.8 machine weight kg: 3.950 Miscellaneous 1 x 2 battery pump system
Molding machine of Mag Type: Ergotech 650-8000 system control: NC 4 year of construction: 1998 Clamping unit Clamping force t: 650 gap mm: 930 Min/max height mm: 450/950 injection unit Screw diameter mm: 110 Injection weight gr: 3930 Injection volume cm m³: 4372 Spray pressure bar: 1815 Miscellaneous 4 core pull 2 pumping sytems
Injection molding machine Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t: 250 gap mm: 675 Holm dimension mm: 560 x 560 min/max height mm: 310 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm m³: 1039 Spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2 machine weight kg: 11.200 Miscellaneous Two pump system EUROMAP 12 2 core pull
Injection molding machine Type: Ergotech 330-2300 system control: NC 4 year of construction: 1998 Clamping unit Clamping force t 330 Gap mm: 675 Holm dimension mm: 710 x 630 min/max height mm: 330 / 830 Plate size: 1040 x 950 injection unit Screw diameter mm: Gr 80 injection weight: 1430 Injection volume cm m³: 1583 Spray pressure bar: 1437 Dimensions and weights Dimensions Lxwxh m: 6.5 x 2 x 2.1 machine weight kg: 16,000 Miscellaneous Two pump system EUROMAP 12 2 core pull
Molding machine of Mag Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t Gap between 250 mm: 575 Holm dimension mm: 560 x 560 min/max height mm: 660 / 760 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm 3: 1039 spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2.2 machine weight kg: 11200 Miscellaneous 2 core EUROMAP 12
Molding machine of Mag Type: Ergotech 100-430 system control: NC 4 year of construction: 1999 Clamping unit Clamping force t 100 gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 / 750 Plate size: 590 x 590 injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm 3: 231 spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 4.4 x 1.4 x 1.8 machine weight kg: 4400 Miscellaneous EUROMAP pull 12, 1 core