Load 6000 kg, pneumat. Drive  ...

• more information

Year of manufacture 2000 generator 70 amps - multi pulse control Mitsubishi - 64 bit CNC travel (X, Y, Z) 400 x 300 x 300 mm Bowl (W x D x H) 650 x 500 x 300 mm electrode changer 20 plate changer integr. C-axis measuring resolution 0.001 degrees accessories CO2 fire-extinguishing, integr. Cartridge filter system status complete overhaul

CNC EDM machine make INGERSOLL type IC 112Fabr. -No: 571085 Year 1985Table surface: 700 x 440 mmLoad capacity: 1000 kgTravel X: 450 mmTravel Y: 350 mmTravel distance Z: 350 mmWorking head: 205 x 205 mmHead load: 600 kgErosion load limit: 400 kgPinole diameter: 120 mmclear width head - table: 300 - 650 mmDrive: servo-hydraulic.Work container size: 960 x 650 x 400 mmCapacity: 230 lFeed rate in 3 axes: 600 mm / minHydraulic capacity: 40 lOperating current: 35 ASupply voltage: 380 V, 50 HzConnected load: 5 kVADimensions L x W x H: 2885 x 2000 x 1950 mmWeight approx. 2200 kgVolume of flushing pump: 25 l / minDelivery volume of filling pump: 130 l / minTotal amount of dielectric: 400 lFilter area: ...

CNC EDM machine make INGERSOLL type IC 263Machine -No: 571304 built in 1988Table surface: 1000 x 525 mmMax. Workpiece nominal load: 2500 kgTravel X: 700 mmTravel Y: 400 mmQuill stroke Z: 400 mmmin / max. Distance table - quill: 350/750 mmTool carrier dimensions: 350 x 310 mmMeasurement resolution: 0.001 mmPlanetary radius mx.:5 mmPinole diameter: 220 mmMax. Head load: 1500 kgRecommended erosion load limit: 1000 kgFeed rate max .: 600 mm / minDimensions of the working container: 1300 x 750 x 550 mmCapacity: 535 lTotal Dilektrium: 750 lVolume of flushing pump: 25 l / minDelivery volume of filling pump: 200 l / minConnected load: 9.5 kVAConnection voltage: 380 V / 3 Ph / 50 HzOutside dimensions ...

Year of manufacture 2001 generator multi pulse - 70 amp + 100 amp booster Control Mitsubishi 32 bit - CNC travel (X, Y, Z) 900 x 1,780 x 550 mm Bowl (W x D x H) 1300 x 2200 x 730 mm workpiece clamping table (B x T) 1150 x 2050 mm accessories 13-fach pick-up linear changer, CO2 fire extinguishing status completely overhauled

Year of manufacture 2000 generator 70 amps - multi pulse control Mitsubishi - 64 bit CNC travel (X, Y, Z) 700 x 1350 x 500 mm Bowl (W x D x H) 1000 x 1600 x 550 mm work table (B x T) 900 x 1500 mm capacity 3000 kg accessories 10-speed pick-up linear changer CO2-Fe uerlöschanlage, cartridge filter system, programming station software MultiProg obsolete status, available from February 2018

Hello - we have for sale an Ingersoll IG1000 Die sinking edm machine Table size 900x650 operating range X = 680 Y = 790 Z = 700 Maximum table load capacity = 2000kg ...

• more information

Year of manufacture 2002 Generator 70 amps, multi pulse control Mitsubishi - 64 bit CNC travel (X, Y, Z)) 525 x 400 x 450 mm Bowl (W x D x H) 750 x 650 x 420 mm workpiece clamping table (B x T) 730 x 630 mm electrode changer 20-fold pick-up plate changer accessories CO2-Feuerloeschanlag e, integr. Cartridge filter system status complete overhaul.

Jig Ingersoll IG750 Bj1992; Travel 500 x 700 x 350 with 6-fold electrode changer for Erowa ITS copper + graphite electrodes.  ...

• more information

Control Mitsubishi-32 bit CNC Generator power 70 amps, multipulse Trajectories (X, Y, Z) 550 x 850 x 450 mm Work container (B x T x H) 800 x 1100 x 480 mm (lift container) Work table (B x T) 760 x 1000 mm Carrying capacity 2,000 kg Electrode changer 20-fold pick-up plate magazine Accessories-CO2 fire extinguishing system -integr. Cartridge filtration system Status outdated Warranty- Price on request