Safan Holland servo-electric press brake type SMK-L-50-2550 -TS1, rb. 1997. Touch screen -LCD Windows, color , graphics, menu in Polish. Bending length: 2550 mm; Stroke: 215 mm; Between columns: 2650 mm; Load: 50 t CNC TS1 control -simulation of 2 D, Polish language - controlled axes Y1; Y2; X; R(pneuma) -10-point table deflection arrow compensation. In the machine a pneumatic die for felting-flattening sheet metal. Tools: Amada. Drive; 9 kW; dimensions: 3500x1800x 2450 mm, weight 5100 kg. Full DTR documentation, also in Polish, a workstation instruction BiHP in Polish.

Press brake with servo-electric drive Safan Holland type SMK-P-50-2550 -TS1, rb. 1999. Touch screen - LCD Windows, color, graphics, menu in Polish. Bending length: 2550 mm; Stroke: 215 mm; Between columns: 2650 mm; Pressure: 50 t CNC TS1 control - 2D simulation, language Polish - Y1 controlled axes; Y2; X; R; Z1; Z2 -10 point compensation of the table deflection arrow. Infrared barriers are installed in the machine to protect the working area. Tools: Trumpf-Wila - set. Drive; 9 kW; dimensions: 3500x1800x 2450 mm, weight 5500 kg. Full O&M documentation, also in Polish, BiHP workstation manual in Polish.

Touch screen - Windows, color, graphics, menu in Polish. Bending length: 1250 mm; Stroke: 115 mm; Between columns: 1250 mm; Pressure: 25 t CNC TS1 control - 2D simulation, language Polish - Y1 controlled axes; Y2; X; R(pneumatic) -10 point compensation of the table deflection arrow. Tools: Amada-Set of tools. Drive; 6 kW; dimensions: 1900x1800x 2050 mm, weight 2250 kg. Full O&M documentation, also in Polish, BiHP workstation manual in Polish.

Press in continuous operation SMK-K-50-2550 TS2 2001 ...

• more information

This Safan CNCL-K 170-3100 TS1 bending machine was manufactured in 2002. It boasts a capacity of 170 tons and can handle lengths up to 3100mm. The machine is equipped with a hydraulic tool holder and an advanced 3D collision system to ensure precision and safety during operation. Despite its extensive operating time of 18,923 hours, it remains a reliable asset for intricate bending tasks. Reach out for further details regarding this Safan bending machine.

Capacity 4300 x 225 tons TS1 CNC Control Y1, Y2, X, R, Z1 and Z1 CNC controlled CNC Bombing Hydraulic Wila NS top clamp ...

• more information

Capacity 2550 x 80 tons X, R, Z1, Z2 and Xdelta CNC controlled Wila New Standard clamping Hydraulic top clamping Machine is expected at the beginning of May (more information on request) ...

• more information

The machine is in good technical condition. Nominal forming force: 65t Working length: 2550mm Weight: 5500kg Possibility of inspection in operation by prior arrangement. ...

• more information

Hydraulic press brake from SAFAN Lochem Holland rb in very good technical condition. 1997/ CNC control new 2023, type CNCL 110-4300 TS1. CNC-controlled synchronous machine TS1-Windows 2023, color, bending simulation, touch screen, controlled axes - Y1; Y2; X; R. New control replaced in 2023. Additionally, a hydraulic die for folding and flattening sheet metal, type DT005, CNC-controlled. Hydraulic punch mounting. 4 bumper fingers with precision controls. Pressure 110 t x working length 4300. Stroke: 180 mm. Between sides 3700 mm. Machine weight 11.7 tons. Drives 7.5 kW. A set of Amada/Trumpf system tools for the entire length of the machine, matrix V = 8 mm / angle 28 deg ...

Force of pressure: 150 t working width: 4300 mm clear stand width: 3600 mm stand projection: 300 mm maximum height: approx. 500/700 mm operating speed: up / down 41 - 65/10 mm / sec back gauge: 1000 mm Electr. Supply: 400 V, approx. 15 kVA kW weight: 14 t space: 4600 x 1950 x 3100 mm  ...

• more information