We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
pressure: 63 t no. of strokes: 70-420 Hub/min sheet width: 160 mm ram - range of adjustment: 80 mm : 300 mm table surface area: 750x660 mm ram surface: 690x460 mm total power requirement: 11 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2500x2500x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Eccentric punching machine HAULICK + ROOS type RVD 125 double column - eccentric press machine No. 212560 Year of construction 1981 Compressive force 125 ton. Table size: 880 x 800 mm, table opening: 470 x 140 mm, stand width: 900 mm, lateral column width: 415 mm, ram stroke: 45 mm, ram adjustment range: 0-80 mm, installation height in the picture: 340 mm , stroke rate: 50 to 300 strokes/min. Engine power main drive 22 kW Mains connection 380 volts, 50 Hz - Double connecting rod engine with 4-bearing eccentric shaft for off-center ram pressure Load - adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of construction 2003 - adjacent control panel for the roller feeder - s ...
Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980 ...
pressure: 160 t dayligth: 700 mm number of strokes adjustable: 30 - 180 min table-size: 1600 x 640 mm ram surface: 1440 x 950 mm distance between columns: 1600 mm hole in the table: 1300 x 350 mm ram adjustment: 100 mm daylight between the side columns: 640 x 700 mm stroke of ram - solid: 40 mm total power requirement: 30 kW weight of the machine ca.: 25 t dimensions of the machine ca.: ca. 3 x 2,3 x 4 m - With hydraulic overload - With shuttle table device Machinewill be partly recondition (with new paint, new cabinet) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5
pressure: 125 t stroke: 10-80 mm no. of strokes: 240 Hub/min ram - range of adjustment: 80 mm table surface area: 850x600 mm ram surface: 760x550 mm hole in the table: 850x130 verstellbar mm table height: 1100 mm tool hole in ram: Ø 50 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: BxTxH: 3000x2000x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t stroke: 6-60 mm no. of strokes: 90-550 Hub/min : 300 mm table surface area: 780x600 mm ram surface: 807x460 mm tool hole in ram: Ø 40 mm total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2900x2000x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:040 t stroke:8 - 50 mm no. of strokes:50 - 300 /min distance between columns:600 mm distance table/ram, max. stroke up, adjustment up:285 mm table surface area:590 x 500 mm hole in the table:590 x 40 - 100 mm table height over floor:860 mm column travel -side:280 mm ram surface:590 x 380 mm ram adjustment:80 mm material width of feeder:150 mm power requirement:7,5 kW clutch:pneumatic ram adjustment:motoric pincer feed:mechanical
pressure:160 t stroke:160 fix mm no. of strokes:30 - 120 /min distance between columns:1190 mm distance table/ram, max. stroke up, adjustment up:735 mm table surface area:1200 x 1000 mm hole in the table:500 x 300 mm table height over floor:900 mm side window:600 mm ram surface:1000 x 800 mm ram adjustment:125 mm material width of feeder:550 mm material thickness of feeder:0 - 6,0 mm feed length:350 mm material cross-cut:1100 mm² Feed speed:50 m/min power requirement:45,0 kW weight:25,0 t dimensions (WxDxH):2,3 x 2,1 x 4,7 m infinitely variable drive:PIV overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic pincer feed:mechanisch, RS 350/550 SL 90
HAULICK HPV 75 Eccentric Press Maximum pressing force 75 t Bottom working table 640x540 mm Maximum number of strokes per minute (manual work) 50 spm Maximum number of strokes per minute (automatic work) 270 spm Min. length of the slider stroke 7 mm Max. length of the slider stroke 78 mm Certified by SCHULER 04.08.2012