We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
This Battenfeld HM 13000/9200/7700 Injection moulding machine was made in 2004 in Germany and has 67871 hours. The machine has a clamping force of 13000 kN and a screw diameter of 120 mm. ...
Battenfeld injection moulding machine Type: BA 13000 / 7700 HM control: Unilog 9000 year: 1996 Clamping unit Clamping force t 1300 Opening stroke mm: 1650 Holm dimension mm: 1600 X 1250 min/max height mm: 800 / 1400 Plate size: 2220 X 1880 Injection unit Screw diameter mm: 120 Injection weight gr: 5146 Injection volume cm m³: 5655 Spray pressure bar: 1361 Dimensions and weights Dimensions Lxwxh m: 14 X 3.2 X 2.54 machine weight kg: 82,500/14500 Miscellaneous 2 + 2 core pull EUROMAP 12 INTERFACE
complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition ...
Stock No.: 503007 Manufacturer: BATTENFELD Type: HM 10000-9200 Control: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing page Clamping force: 10000 kN Holmass v: 1120 mm Holmass h: 1400 mm Panel size h: 1960 mm Panel size v: 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm plate pitch: 2120 mm Opening distance: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering fixed plate D: 315 mm Technical data spray side Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11 ...
Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12146 h Runhour! Control: Unilog 9000 C year of manufacture: 1997 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot
Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12757 h Runhour! Control: Unilog 9000 C year of manufacture: 1996 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot
Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control: UNILOG B4 Clamping force: 13000 kN Year of construction: 2005 Technical data closing page: Drive type: fully hydraulic Closing type: Full hydraulics Type: four-spar Clamping force: 13000 kN Tie bar size h: 1600 mm Tie bar size v: 1250 mm Panel size h: 2220 mm Panel size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm plate spacing max.: 3850 mm Opening distance: 2850 mm Ejector stroke: 350 mm Ejector force: 165 kN Centering movable plate D: 315 mm Centering fixed plate D: 315 mm Technical data spray side: Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1630 ...
warehouse no.: 503402 manufacturer: BATTENFELD type: HM 8000-7700 controller: UNILOG B4 year of construction: 2003 operation hours: 50800 h clamping force: 8000 kN distance between tie-bars h x v: 1120 x 1020 mm size of mould plates h x v: 1620 x 1530 mm min. mould height: 725 mm max. mould height: 1175 mm max. open daylight: 2225 mm opening stroke: 1500 mm screw diameter: 90 mm swept volume: 3181 ccm injection pressure: 2420 bar equipment included: screen text german Bi-metallic barrel core pulling hydraulically 3x air valve 1x machine incl. Handling Anti vibration mounts interface EUROMAP 67 measures of machine l x w x h: 10.41m x 2.34m x 2.47m total weight ...
This Battenfeld HM 2P 800-7700 Injection moulding machine was manufactured in 2003 in Austria. This machine has an injection unit with a screw diameter of 120mm, specific injection pressure of 1361 bar, and a calculated stroke volume of 5655 cm³, enabling a maximum injection weight of 5146 g. With a clamping force of 8000 kN, clear tie bar spacing of 1120x1020 mm, and platen size of 1620x1530 mm. The mould height is adjustable from 450 to 1100 mm, with an opening force of 480 kN. It operates with a drive power of 110 kW. Contact us anytime for further information.
Battenfeld injection moulding machine Type: TM 1600 / 750 control: B4 year: 2001 Clamping unit Clamping force t 160 Gap mm: 480 Holm dimension mm: 520 x 520 min/max height mm: 225...-550 Plate size: 750 x 815 injection unit Screw diameter mm: Gr 40 injection weight: 258 Injection volume cm m³: 283 Spray pressure bar: 2678 Dimensions and weights Dimensions Lxwxh m: 5.1 x 1.5 x 2.1 machine weight kg: 6000 Miscellaneous B-4 control system interface