complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition  ...

• more information

Battenfeld BA 1000/200 CDC Closing unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 640 x 590 Clearance between columns (hxv) [mm] 370 x 420 Min./max. mold height [mm] min 250 Maximum opening width [mm] 725 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 175.9 Injection weight [g] 160 Injection pressure [bar] 1137 Electrical and hydraulic equipment Rated power of the pump motor [kW] 11.2 Heater power [kW] 7.88 Dimensions and weight Net weight with control cabinet [t] 4.3 Dimensions (L x W x H) [m] 4.4 x 1.8 x 1.8

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – c ...

Clamping force [kN] 250 Mounting plate dimensions (hxv) [mm] 440 x 440 Clearance between columns (hxv) [mm] 270 x 270 Min./max. mold height [mm] min125mm Maximum opening width [mm] 450 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 45 Shot weight [g] 41,5 Injection pressure [bar] 2776 Dimensions and weight (approximately) Net weight with control cabinet [t] 2,6 Dimensions (L x W x H) [m] 3,27 x 1,35 x 1,82

Clamping force [kN] 400 Mounting plate dimensions (hxv) [mm] 440 x 440 Clearance between columns (hxv) [mm] 320 x 320 Min./max. mold height [mm] min 150 Maximum opening width [mm] 475 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 45 Shot weight [g] 41,5 Injection pressure [bar] 2776 Dimensions and weight (approximately) Net weight with control cabinet [t] 2,6 Dimensions (L x W x H) [m] 3,27 x 1,35 x 1,82

Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: Unilog 4000 B Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 560 mm x 560 mm Disk size/platen size: 800 mm x 800 mm WZ height/mould hight: 200 mm max 520 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 970 mm Auger/screw size: 50 mm Stroke volume/shot volume: 540 CC / 491 gram PS spec. Spritzdr / injection pressure: 1822 bar General / General engine power: 30 kW Heating/heating power: 15.6 kW Dimensions/dimensions: 5.65 m x 1.45 m x 2.10 m Weight/weight: 10400 kg screen text/language: English additional equipment/additional eq ...

Battenfeld BA 2000 / 1000 BK injection moulding machine Year: 1997 Driver Version: Unilog 4000 B Technical Details : Clamping Unit: Clamping force: 2000 kN Mold plate size (h x v): 800mm x 800mm Distance between columns (h x v): 560 mm x 560 mm Mould opening stroke: 450mm Mould height min.: 220 mm Maximum mould height: 520 mm Max. daylight: 970 mm Hydraulic ejector - stroke: 160 mm Forward/reverse ejector force: 67 kN Injection Unit Screw diameter : 55 mm Ls/D Ratio: 20 Injection pressure: 1943 bar Injection volume: 522 ccm Injection weight, PS: 595 g Auger speed: 285 1/min Maximum plasticizing rate: 49 g/s Nozzle pressure: 131 kN Electrical & Hydraulic Equipment Nomi ...

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 800 x 800 Clearance between columns (hxv) [mm] 560 x 560 Min./max. mold height [mm] 220-520 Maximum opening width [mm] 970 Injection unit Screw diameter [mm] 55mm Injection volume [cm3] 522 Injection weight [g] 595 Injection pressure [bar] 1943 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 22.6 Dimensions and weight Net weight with control cabinet [t] 9.8 Dimensions (L x W x H) [m] 5.65 m x 1.45 m x 2.10 m

Haul-off, used and refurbished Manufacturer: Battenfeld Type: P-250-SX-2000 Year of construction: 1988 Haul-off force: 30,000 N Pad width: 250 mm Effective contact length: 2000 mm Number of rubber pads: 200 pieces Haul-off speed: 0.16 - 4.0 m/min. Drive motor: 4.2 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic Profile cross-section: max. approx. 300 x 100 mm Power: 10 kW Dimensions: 3400 x 1300 x 2300 mm (LxWxH) Weight: approx. 2300 kg Condition: The haul-off has recently been completely overhauled.

Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2