Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 ...

Cat.-No. 15-00013 in a very good condition Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Total Height: 1750 mm Height: 1250 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for o ...

ZKG tanks / storage tanks / tank / pressure tanks in V2A with cooling jacket and insulation Operating pressure: 3.0 bar test pressure: 4.0 bar Capacity: 2,800 litres NEW! Surface: inside and outside 2B = IIIC material: V2A (AISI 304) 1.4301 Top shelf: â?¢ with 2 loops â?¢ with threaded weld NW 25 â?¢ with CIP cleaning NW 40 â?¢ with below drawn pipe DN 32 with fermentation sheet pile valve (with pressure relief valve, with pressure gauge)(gegen Aufpreis) Tank cylinder: â?¢ with wire hook up â?¢ with manhole oval 430 x 330 mm, with handle â?¢ with cooling jacket H = 750 mm and with insulation &a ...

52,000 litres KZE tanks/storage tanks/ sterile tanks 4 pieces UNI-BAR B. No. 19-091 A-D GL Dimensions: Diameter approx. 3,175 mm Zyl. Height approx. 5,750 mm Total height with feet approx. 7,570 mm Material: V4A, WSt. 1.4571 Containers with curved floors Wall thicknesses: underbody 5 mm, sheath 4/3/2.5 mm, upper floor 3 mm Topsoil: 1 threaded nozzle DN 80 with removable spray head, with pulled-down line NW 40 1 Venting nozzle NW 80 Cylinder: 1 manhole 350 x 450 mm swivel 1 stand display valve with scale strip and plexiglass tube 1 threaded nozzle for clear drain NW 40 1 1/2 for tasting tap 1 slanted seat flange DN 350 for agitator - without a ...

52,000 litres KZE tank/ storage tank/ sterile tank UNI-BAR B. No. 19-094 GL Dimensions: Diameter approx. 3,175 mm Zyl. Height approx. 5,750 mm Total height with feet approx. 7,570 mm Material: V4A, WSt. 1.4571 Containers with curved floors Wall thicknesses: underbody 5 mm, sheath 4/3/2.5 mm, upper floor 3 mm Topsoil: 1 threaded nozzle DN 80 with removable spray head, with pulled-down line NW 40 1 Venting nozzle NW 80 Cylinder: 1 manhole 350 x 450 mm swivel 1 stand display valve with scale strip and plexiglass tube 1 threaded nozzle for clear drain NW 40 1 1/2 for tasting tap Underbody: 1 outlet pipe pulled forward DN 65 Otherwise according ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 2.000 liters NEW! Measurement und weight: Diameter: 1110 mm Total height: 2650 mm Cylinder height: 2000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x leve ...

Eurolux Beer Tank/ Storage Tank/ Pressure Tank 1000 Litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Pillow Plate Inside Operating pressure:: +3,0 bar +2,0 bar Test pressure: +5,2 bar + 3,4 bar Operation vacuum: -0,15 bar - 0,15 bar Operation temperature: -10/+80°C -10/+130°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Upper Bottom: - strong stackable crown - manhole lid round Ø 400 mm with 2 x handle - 1 x thread connection DN 50 with blind cap - 1 x overpressure valv ...

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - co ...

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks ...

Kat. No. 09-1049-3 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,950 mms of weight: 126 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature controll unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works ...