Universal Slitting Line 72″ x .187″ x 20,000Lb Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Co ...

Slitting line HJ Loop 1600mm x 9mm x 50,000Lb (A3790) for longitudinal cutting of coil metal into strips of required width up to 9mm metal thickness Year of Manufacture: 2002 Make: HJ ENG,KOREA Raw Material: HR Coil Tensile Strength: Max. 50Kg/mm2 Yield Strength: Max. 30Kg/mm2 Coil Thickness: Min. 1.2mm ~ Max. 9.5mmT Coil Width: Min. 400mm ~ Max. 1,650mm Coil Weight: Max. 25,000Kg Coil Inside Diameter: 508mm Coil Outside Diameter: Min. ∅1,000mm ~ Max. ∅2,000mm LINE DATA Line Speed: Max. 150/80m/min Threading Speed: Max. 20m/min Slitting System: Pull & Drive Cutting by DC Power Control Slitting Width: Min. 40mm ~ Max. 1,300mm Slitting Number: Max. 30Cuts x 29Strips  ...

Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders  ...

Slitting Line Cesar 8 Slitting line / Cut to length line with winder unloading arm, strip separator and strip ejector. Cut : longitudinal/longitudinal Width _Useful Coil: 350 mm. Maximum thickness: 2 mm. Minimum thickness: 0.20 mm. Unwinder reel capacity: 2500 kg. Internal Coil Diameter: from 300 to 500 Max Coil Outer Diameter: 1000 Shear shaft diameter: 80 mm. Line Direction: Right to Left no. 02 complete sets of knives (rotary slitter blades): 1 series (10 knives each type - mm. 3/3.5/4/5/6/8/10 + spacers + rubbers 2 series (16 knives per type - mm. 2.80/2.85/2.90/2.95/2.5/3/3.5/4/4.5/5/6/8/10 + hardened spacers with hardfacing + normal spacers + rebate spacers + hardened an ...

Nr. 03 SINGLE-OVITE EXTRUDERS DIAMETER 100 Nr. 01 HEAD CONSTRUCTION 2 LAYERS  ...

• more information

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line ...

bottling line isobaric 6.000 BPH – CHAMPAGNE Speed: 6.000 BPH on still wine 3.500 BPH on champagne Year: 1999/2000 Line composed of: Depalletizer ACMI mod. STRATOS D200 with interlayer remover system Filling monoblock BERTOLASO 28.36.6.4 composed of: - Rinser 28 clamps - Filler isobaric 36 valves with pre-evacuation and self-leveling - Corker 6 heads natural straight cork and mushroom cork - Capper 4 heads screw cap stelvin Caps elevator BERTOLASO Wirehooder NORTAN mod. Minerva 60 Washerdryer CAMES mod. Wdt 12 Capsuling machine NORTAN mod. Prisma composed of: - Carousel of 16 heads for polylaminate capsules - Carousel 8 heads for champagne capsules Labeller KRON ...

BATTERING-GLUING AND BREADING MACHINE, STEIN, MESH WIDHT 200MM Technical features: Battering-gluer: Material: Stainless steel Power supply: 380V-440 / 50-60Hz Battering-gluer dimensions: 1200 x 700 x 2000 mm Breader, Stein, model: E8J Serial number: 184 Bandwidht: 200 mm Dimensions: 2400 x 750 x 2000 mm

Insertion length/ width: 450/ 340mm, length: 730mm, width: 595mm, height: 1140mm, weight: 200kg. ...

• more information

Entrance turntable - sliding the PET bottle off the pallet, automatic adjustment to the belt Conveyor belt with shutters for positioning bottles under the filler Filler - 8 nozzles that lower to the bottom of the bottle to reduce foaming, gradual extension and filling Linea capper (carousel) - magazine of standard caps, their automatic positioning and attachment to the neck of the bottle, lowering of the capping head and tightening of the top of the bottle Print dose labels and expiration dates on the body of a filled and closed bottle Placing, wrapping and sticking the label on the bottle - Collamat 2610 / R applicator Move to the table for placing bottles in crates