We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
thermoset BMC, included in the sale 2 pcs Tool-Temp tempering device - water, 1 pc Wittmann W711-0507 robot, Duroplat D45 unit (dry sets), 2 pcs Regloplas tempering device, ...
Closing unit Clamping force [kN] 2200 Dimensions of mounting plates (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Min./max. mold height [mm] 300/650 Maximum opening width [mm] 1050 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 322 Injection pressure [bar] 2080 Electrical and hydraulic equipment Rated power of the pump motor [kW] 37 Heater power [kW] 16.8 Dimensions and weight Net weight with control cabinet [t] 8.5 Dimensions (length x width x height) [m] 5.43m x 1.88m x 2.2m Additional equipment: 2 x Conveyor belt Safety cage Wittmann W621-1449 robot (X=590mm, Y=1200mm, Z=2500mm)
Closing force: 150 T Between columns: 570 x 570 mm Injection: Screw diameter: 60 mm Bars: 2000 General: Motor power: 45 kW Heating power: 25.9 kW Closing weight: 12 Tons Injection weight: Dimensions length: 7m Width dimensions: 1.70m Dimensions height: 2.2m Options: Cores: 2 Robot interface: yes Bi metal: yes
CLAMPING FORCE: 200TON PLATEN SIZES: 795 X 795MM D.B.T.B: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM SCREW DIAMETER: 45MM INJECTION PRESSURE: 2470BAR STROKE VOLUME: 286CM3 SHOT WEIGHT (P/S): 240GR CONTROLS: SELOGICA MOTOR: 30KW HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC CORE PULLING: 1 AIR VALVES: 1
used injection moulding machine 2-colours 2-K (45° arrangement of the 2nd unit) from clean room production Manufacturer: Arburg Type: 570C 2000-350/150 Control Selogica year of construction: 2007 Extras / Special features - Robot interface - 4x core pull - Technology level 2 and 3 (3 control pumps) - screw and barrel highly wear resistant - open nozzle - position controlled screw - Accumulator system f. fast injection - hydraulic accumulator - injection pressure increased for 2nd unit - Extension of tie bars of min. mold installation height to 500 mm Opening stroke unchanged - cores freely programmable - blow-out device - Interface for temperature control units ...
ARBURG 200 TON WITH ROBOT WORKING HOURS ARE PRESENT ON THE PHOTOS YEAR : 1999 TECHNICAL DATA: EUROMAP SIZE: 2000-675 CLAMPING FORCE: 2000KN SCREW 50mm closing force: 90 kn OPENING STROKE MAX 650mm I EXCELENT WORKING CONDITION, MACHINE IS WORKING DAILY PRODUCTION MACHINE IS AWAILIBLE IMEDIATELY WE ORGANIZE DISMANTLING LOADING AND TRANSPORT TO THE CUSTOMER
Production year: 2006 Injection unit: .../150-150 Screw diameter: 30 / 30 mm Injection volume: 77 / 77 cc Injection weight: 72 / 72 g Tool closure system: 200/... Clamping force: 200 t Distance between tie rods: 570 x 570 mm Tool height: 400...1050 mm Ejector stroke: 225mm On the photos shown, the peripherals are not always included.
Clamping force: 200 t Year of construction: 2002 Injection weight in PS: 72 / 45 g Control type: Selogica Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Injection volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force:: 200 t Light tie bar distance: 570 x 570 mm Ejector travel: 225 mm General information: Weight: 8000 kg Dimensions (m) LxWxH: 5.1 x 1.8 x 2.2 m • 2 x hydraulic core pull • 1 x Air Valve Snail: Top/Vertical: 30mm Bottom/Horizontal: 25mm
Injection moulding machine R2, manufacturer: ARBURG, type: Allrounder Centex 570C 2000-350/150, year of manufacture: 2004, serial number: 195 316, specified automatic hours: 63,755, specified operating hours: 74,749, clamping force hydraulic: 2,000 KN, max. plate spacing: 1,050 mm, mould height: min. 400 mm, ejection force: 66 KN, ejection distance: 225 mm, ejector length: 110 mm, number of hydraulic core pulls: 3, electrical power heating/motor: 13.6/30 kW, spray volume: 182/106 cm³, spec. Spraying pressure: 2,120/1,840 bar, auger: 40/35 mm, radius nozzle: 15, with handling GEKU SR 500 SH, year of manufacture: 2004, serial no.: 1 480, incl. barrier fence, + 1 ARBURG turntable and 1 mixing ...
Arburg 570C 2000-800 e² / Hybrid machine / Very good technical condition Year of construction: 2015 Injection unit: Screw diameter: 50 mm Spray weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit : Clamping force: 200 t Tie bar spacing: 570x570 mm Size of clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 36,974 h in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Main motor of the machi ...