We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
3- falling stream evaporation system with mechanical re-compression. Previous product: condensed milk from skimmed milk Input: 6,600kg/h, 9%TS Water evaporation: 5,400 kg/h Concentrate: 1,200 kg/h 50%TS System is still complete installed and immediately available. Costs of dismantling and disassembly at the expense by the buyer Equipment is subject to prior saleä!
A 7-stage GEA Wiegand evaporation plant with mechanical vapour compression, Made of V4A material with 2 identical high concentrators and one Vapour compression system for 2 Hoko systems. Capacity: 50,000 litres per hour Year of manufacture 2007 Product enema: 52,000 kg or 38,500 kg/h Concentrate: 12,240 kg or 18,900 kg/h for truck transport Steam consumption Low pressure steam : 300 kg/h with Live steam: 1,000 kg/h, when heating the system max. 2,300 kg/h further energy data can be found in the plant With a concentrate supply tank and with a complete cleaning system, location ground floor with complete tank piping to 2 x 50,000 l tanks and with complete control in Sieme ...
Mesh and intestinal retracting device Wiegand NetMan NE-30 in a very good used and functional condition. Special machine for the production of rolled roasts, salmon, nut or cooked ham. Completely made of stainless steel. Purely pneumatic drive (external compressed air supply 6 to 14 bar required), 70 cycles/minute, chamber length 300 mm. Several shapes of different sizes are available. Machine is rollable. Dimensions B/T/H 180/50/120 cm. Workshop-tested, ready to use. Further on request.
Manufacturer: Wiegand Type: 225/3 Connection:400 V, 50Hz Universal professional grind type 225/3 - overhauled If you want to sharpen splitters and cutter knives in addition to hand knives, you are well equipped with our triple grinding. This machine is also used by professional knife sharpeners. A lamellar grinding wheel is available for the crown grinding. Grinding wheel diameter 225 mm, 215 rpm. Cotton disc diameter 220 mm, 3000 rpm. Slat disc diameter 250 mm, 3000 rpm. Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Wiegand Hangfix B-20, with 3 extra spools of thread, Dimensions LxWxH approx. 75x75x133cm, weight approx. 140kg, good used condition, fully functional ...
Used Wiegand TVR-6-Effect + High Concentrator Evaporator., Previously used for whey., Still mounted inside the factory in Spain., 1.Effect, Diameter of the stage 1.050 mm, Diameter of the tubes 31 mm, Length of the tubes 10.000 mm, 2.Effect, Diameter of the stage 1.050 mm, Diameter of the tubes 31 mm, Length of the tubes 10.000 mm, 3.Effect, Diameter of the stage 1.000 mm, Diameter of the tubes 31 mm, Length of the tubes 10.000 mm, 4.Effect, Diameter of the stage 600 mm, Diameter of the tubes 41 mm, Length of the tubes 10.000 mm, 5.Effect, Diameter of the stage 450 mm, Diameter of the tubes 41 mm, Length of the tubes 10.000 mm, 6.Effect, Diameter of the stage 400 mm, Diameter of the tubes 41 ...
General SKU403U1197 LocationBarneveld MakeE&E Verfahrenstechnik TypeBlasenverdampfer No.2543-5000 Year of construction2010 Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Technical specs Max. temperature170 °C Main Features MaterialStainless steel Motor4 KW Specified Features - Distillation Capacitynetto 500Ltr. (bruto 677Ltr.) Vessel sizesDia. 900x1300mm With jacketcheckVolume 55 ltr, allowable temp -10/170°C, design pressure -1/6 bar Max. temperature-10/+170°C With stirrercheck Motor4,0kW, 400Volt, 1435rpm (EX) Speed49rpm With condensercheck With pumpcheck Sihi pump, type Lemb 161 8Z, 5,0kW 380-420 ...
ULTRASONIC INSPECTION - TESTQMATIC - TYPE: SPA-2N, L=5-60 M, 1 M/SEC., 1988 EDDY CURRENT INSPECTION - MPA - 1989 RAIL PROFIL MEASURING DEVICE - SCHMITZ & SÖHNE AND BSB - 1989 PRODUCT HEIGHT: 95-165 MM, HARDWARE & SOFTWARE ...
Please inquire with location and postcode VAT not deductible ...
This ECS is used to separate the non-ferrous metal fraction from other scraps in plastic recycling lines.., It can handle very small parts but even larger ones, up to 400 mm, depending on the model., Metals which will be separated are : copper - alluminium - brass - bronze, Constructed in a workmanlike manner, durable and efficient machines made in Italy, these devices offer excellent performances in any plastic processing line., To get a customized offer, please send us :, - material processed and size, - contamination % and type, - max contaminants size, - throughput rate of the line