459 offers motorized plate bending machines WMW

found in all categories

Category: 102 lathes
New in: used
Location: Land-de DE
Seller: Telux Immobilien GmbH

Lathe see BilderAb site OhrdrufZwischenverkauf errors and omissions vorbehaltenAnfragen at 0049 172 79 66-561

Category: 109 other metal working machines
approved
dealer
New in: used
Price 170 €
Location: Land-de DE
Seller:

Category: 1101 power generators
approved
dealer
New in: used
Price 1.500.000 €
Location: Land-uk UK
Seller: Gas Engine Exchange Ltd

12 MW POWER PLANT Consisting of 3 X 4 MW DEUTZ/MWM 2032 Age: 2009 Hours: 16,000 Capacity: 4 MW per genset Voltage: 6,300 Volts with a transformer to output at 400 Volts. HZ: 50 Scope of Supply: Complete Power Plant including radiators and compressed air start system to get full load in 4 minutes.

Category: 101 boring mills and machining centers
approved
dealer
New in: used
Price 520 €
Location: Land-de DE
Seller:

Category: 109 other metal working machines
approved
dealer
New in: used
Location: Land-pl PL
Seller: usedmachines

Tension machine Manufacturer: WMW Type: EDZ-100 Machine for testing compressive strength and stretching up to 1000KN for samples with a diameter of 15 to 60 mm. Complete device.

Category: 109 other metal working machines
approved
dealer
New in: used
Price 220 €
Location: Land-de DE
Seller:

Category: 101 boring mills and machining centers
approved
dealer
New in: 2012
Location: Land-de DE
Seller: CBW Böhmer Werkzeugmaschinen

WMW UNION type: BFKP BJ. obsolete 1983/2012 Control: SIEMENS 840 d 6-axis Spindle hours after overhaul: 2548 h more data see annex AWF-map

Category: 103 milling machines
approved
dealer
New in: used
Price 1.450 €
Location: Land-de DE
Seller:

Category: 110 accessories for machine tools
New in: used
Price 1.250 €
Location: Land-de DE
Seller: IS Industriemaschinen- und Stahlwarenhandel Ali Fi

Used three or four jaw Chuck with new (unused) clamping drive WMW EDU I80. For clamping and opening the Chuck with torque pre-set. The new tension actuator can be used also on other machines/apparatus. Chuck size is 315 mm. Price per piece 1,250 €

Category: 109 other metal working machines
approved
dealer
New in: used
Price 750 €
Location: Land-de DE
Seller:

Category: 106 presses
approved
dealer
New in: 1966
Location: Land-de DE
Seller: MPS Frank Müller

Eccentric press Manufacturer WMW Type: PEE 160 Year of manufacture is about 1966 More data, please refer to the rating plate. Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 109 other metal working machines
approved
dealer
New in: used
Price 490 €
Location: Land-de DE
Seller:

Category: 108 welding machines
approved
dealer
New in: used
Price 16 €
Location: Country-DE Germany, 06112 Halle
Seller: MEDCO Congreß-und Handels GmbH Halle

; ready for use

Category: 107 sheet metal working
New in: 1983
Location: Country-DE Germany, 58256 Ennepetal
Seller: Wirths GmbH, Werkzeugmaschinen

material width: 1650 mm material thickness: 6 - 20 mm no. of straightening rolls: 11 straightening feed: 10 m/min straightening roll diameter: 160 mm adjustment: 10- 40 mm total power requirement: 76 kW weight of the machine ca.: 39,2 t dimensions of the machine ca.: 4 x 5 x 3 m Machine does have exchange cassettes of rolls. We supply 1 set of extra cassetes along with the machine. Rolls are supported by backup rolls. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
approved
dealer
New in: used
Price 650 €
Location: Country-de Germany, 96515 Sonneberg
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

; Good

Category: 101 boring mills and machining centers
approved
dealer
New in: used
Location: Country-de Germany, 49424 Goldenstedt
Seller: WeMa A. Pigge GmbH

number of spindles: 4 bore capacity in steel (diameter): 2 - 20 mm bore stroke: 100 mm throat: 210 mm number of spindle speeds: 4 spindle turning speed range: 355, 710, 1000, 2000 U/min transmission ratio: 2 motor speeds:: 2 distance between table and drill chuck: min 140 - max 350 mm table height: 835 mm table surface area: 1500 x 420 mm T-slots: 12 mm number of T-slots: 2 weight of the machine ca.: 1000 kg dimensions: 1500 x 600 x 1750 m drill spindle quick release chuck: METABO 3-16 mm series drilling machine with gearbox 4 METABO drill heads, all height adjustable with hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109 other metal working machines
approved
dealer
New in: used
Price 1.000 €
Location: Country-de Germany, 96515 Sonneberg
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

; well

Category: 103 milling machines
approved
dealer
New in: 1978
Location: Country-de Germany, 49424 Goldenstedt
Seller: WeMa A. Pigge GmbH

x-travel: 820/850 mm y-travel: 300/330 mm z-travel: 485/505 mm weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1670 x 1620 x 2500 m The connecting cable between control cabinet and machine has been cut, but has been marked properly. Further techniscal detals please consider pictures/PDF The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines
approved
dealer
New in: used
Price 1.300 €
Location: Country-de Germany, 96515 Sonneberg
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

; good

Category: 109 other metal working machines
approved
dealer
New in: used
Location: Country-de Germany, 49424 Goldenstedt
Seller: WeMa A. Pigge GmbH

diameter: 10P9x2,3 mm length: 1190 mm keyway width: 10Px2,3 mm depth: 3,5 mm : 32-112 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines
approved
dealer
New in: 1968
Price 800 €
Location: Country-de Germany, 96515 Sonneberg
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

; well

Category: 102 lathes
approved
dealer
New in: 1972
Location: Country-DE Germany, 46244 Bottrop-Grafenwald
Seller: Sperling Werkzeugmaschinen

turning diameter over bed: 450 mm turning diameter over slide rest: 230 mm turning length: 1250 mm spindle bore: 55 mm spindle turning speed range: 35 - 1800 U/min feeds - longitudinal: 0,035 - 10 mm/U feeds of cross-slide: 0,014 - 4 mm/min total power requirement: 15 kW weight of the machine ca.: 2500 t dimensions of the machine ca.: 3,3 x 1,9 x 1,8 m Qick Toolholders: Multifix Gr. B 3-jaw chuck: 250 Röhm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes
approved
dealer
New in: 1957
Price 650 €
Location: Country-de Germany, 96515 Sonneberg
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

; Good

Category: 203 planing machines
approved
dealer
New in: 1964
Location: Country-de Germany, 47918 Tönisvorst
Seller: SK Maschinen-Service GmbH

x-travel: 8000 mm y-travel: 2500 mm workpiece height: 2360 mm table width: 2240 mm table length: 10100 mm weight of the machine ca.: 110 t dimensions of the machine ca.: 20x8,5x5,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes
approved
dealer
New in: 1957
Price 650 €
Location: Country-de Germany, 96515 Sonneberg
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

; Good

Category: 106 presses
approved
dealer
New in: used
Location: Country-DE Germany, 58840 Plettenberg-Siesel
Seller: Maschinen Schwartpaul GmbH

pressure: 250 t throat: 360 mm stroke: 500 mm table surface area: 900x630 mm ram surface: 750x450 mm table height: 810 mm dayligth: 800 mm weight of the machine ca.: 14 t dimensions of the machine ca.: BxTxH 2200x2500x3800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 104 grinding machines
approved
dealer
New in: used
Price 4.800 €
Location: Country-de Germany, 96515 Sonneberg
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

; Good

Category: 106 presses
approved
dealer
New in: 1995
Location: Country-DE Germany, 58840 Plettenberg-Siesel
Seller: Maschinen Schwartpaul GmbH

pressure: 100 t throat: 360 mm stroke: 500 mm table surface area: 740x560 mm ram surface: 530x400 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 2000x1700x2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
approved
dealer
New in: used
Price 1.800 €
Location: Country-de Germany, 96515 Sonneberg
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

; Good

Category: 103 milling machines
approved
dealer
New in: 1980
Location: Country-ch Suisse, 8598 Bottighofen
Seller: Gromag AG

x-travel: 1120 mm y-travel: 355 mm z-travel: 400 mm table surface area: 400 x 1600 mm table load: 1500 kp spindle taper ISO: 50 0 distance work spindle /surface of the table: 600 mm feed - longitudinal/cross: 16 - 800 mm/min feeds vertical: 5 - 250 mm/min rapid motion -longitudinal/cross/vertical: 3150 / 1000 mm/min turning speed range: 28 - 1400 U/min voltage: 380 V / 50 Hz total power requirement: 14,5 kW power capacity: 11 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3,5 x 3,5 x 2,2 m spindle and holder for horinzontal milling device universal milling head The data for this ad was created with ModulMWS - ...

Category: 101 boring mills and machining centers
approved
dealer
New in: new
Price 600 €
Location: Country-de Germany, 96515 Sonneberg
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

Category: 104 grinding machines
approved
dealer
New in: 1964
Location: Country-de Germany, 32257 Bünde
Seller: Plum & Partner Werkzeugmaschinen GmbH

grinding diameter: 200 mm grinding length: 630 mm centre height: 110 mm grinding diameter economically: 140 mm swing dia.: 210 mm workpiece weight max.: 40 kg dimensions of grinding wheel: 400 x 40 x 127 mm grinding wheel speeds: 1650/2050 U/min workpiece turning speeds: 36 - 420 U/min table speed -stepless-: 0,1 - 6 m/min independent disposition at table stroke: mm power capacity - grinding spindle: 3,5 kW power capacity - workpiece spindle: 0,8 kW driving capacity - oil pump motor: 1,6 kW power capacity - cooling pump: 0,1 kW weight of the machine ca.: 3,7 t dimensions of the machine ca.: 3,6 x 1,5 x 1,4 m Electric 380 Volt: Gesamtleistung 10,3 KW Cooling equipment: Internal cylindr.grind ...

Category: 103 milling machines
approved
dealer
New in: 1978
Price 1.600 €
Location: Country-de Germany, 96515 Sonneberg
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

Category: 106 presses
approved
dealer
New in: used
Location: Country-de Germany, 32257 Bünde
Seller: Plum & Partner Werkzeugmaschinen GmbH

pressure: 63 t throat: ca. 360 mm stroke: 500 mm pre-running speed: 0,053 m/sek return capacity: 22 t operating pressure: 125 kp/cm² return speed: 0,150 m/sek distance between table / ram: 800 mm table-size: 630 x 500 mm capacity of ejector in table: 16 t operating pressure: 140 kp/cm² ejector stroke: 160 mm Drive: 8 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 1,5 x 1 x 2,6 m Electric 380 Volt: Control unit: Draw cushion: Hydraulic high-speed single-deck press with hydr. ejector in the press table combined with thermoforming device and hydr. Ejector in the ram. Follow-up time 231 ms. Modes of operation: Single stroke, continuous stroke, two - hand or foot setting, e ...

Category: 101 boring mills and machining centers
approved
dealer
New in: used
Price 2.000 €
Location: Country-de Germany, 96515 Sonneberg
Seller: Fa. Uwe Schlammer Handels- und Vermittlungsagentur

; Good

Category: 106 presses
approved
dealer
New in: 1966
Location: Country-de Germany, 32257 Bünde
Seller: Plum & Partner Werkzeugmaschinen GmbH

pressure: 160 t throat: 400 mm stroke: 20,160 mm table-size: 1000 x 770 mm strokes/minute: 38 ram surface: 580 x 415 mm dayligth: bis 390 mm mm ram adjustment: 100 mm total power requirement: 7,5 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 2,4 x 1,8 x 3,1 m Electric 380 Volt: Two-hand clutching: Switch gear cabinet: Central lubrication: Machinefeets: with back gears, fixed table, adjustable stroke an ram, less used in good condition. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109 other metal working machines
approved
dealer
New in: used
Location: Land-de DE
Seller: Oeben Werkzeugmaschinen

Technical data Material diameter 160 mm Materallänge 900 mm Weight 3.6 to

Category: 109 other metal working machines
approved
dealer
New in: used
Location: Country-de Germany, 47877 Willich - Neersen
Seller: Markus Hirsch GmbH

centre height: 420 mm diameter of quill: 120 mm stroke: 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
approved
dealer
New in: 1978
Location: Land-de DE
Seller: ZOMA Maschinenhandel

Hydraulic horizontal alignment u bending press, used Hydraulic multipurpose press, used Type / type: PYXWM 250 Year / year of make: 1978 Manufacturer / make: WMW Dessau Maximum pressing force / maximum tonnage: 250 t Piston stroke / stroke of plunger: 580 mm RADIUS / depth of throat: 325 mm Range of adjustment of the pressure piece shots • ï? Gegentraversen / counter cross beam: 260.1250 mm • ï? Kolbentraverse / plunger cross beam: 260.. 850 mm Height of the pressure piece shots / height of locators: 600 mm Bending and straightening capacity / straightening and bending capacity: Profiles / profiles • ï? Flachstahl /  ...

Category: 106 presses
approved
dealer
New in: 1961
Location: Country-de Germany, 47877 Willich
Seller: Teutenberg Maschinen GmbH & Co.KG

pressure: 315 t stroke: 40 mm total power requirement: 30 kW weight of the machine ca.: 11 t dimensions of the machine ca.: m Straightening and bending press (horizontal) Make: WMW Type: PKWRB 315        Pels NJ 315 Working force: 315 to. Number of strokes / per minute approx. 25 Working range:           Round: up to 190 mm Ø           Square: up to 145 mm           Flat upright: up to 425 x 80 mm           Flat horizontal: up to 180 x 60 mm           T bars accordingly           Main motor: 380V, 50Hz, 30kW, 1460rpm Machine weight approx. 11 to. The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

Category: 106 presses
approved
dealer
New in: used
Location: Country-DE Germany, 42699 Solingen
Seller: G. Folmer Industriebedarf

pressure 63 t stroke 120 mm total power requirement 6 kW weight of the machine ca. 4 t

Category: 109 other metal working machines
approved
dealer
New in: 1965
Location: Country-de Germany, 47877 Willich
Seller: Teutenberg Maschinen GmbH & Co.KG

working area: 80 mm main drive: 38 kW Total weight, approx.: 12.000 kg Bar length: mm speed: m/min 3 ROLL STRAIGHTENING AND POLISHING MACHINE Constr.: WMW Type: URP 80 year: 1965 The machine can be used for straightening crude round material or for straightening and polishing of bars and thickwalled tubes. working range: max. 80 mm Ø main motor: 38 kW Total weight of the machine: ca. 12to. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 108 welding machines
approved
dealer
New in: used
Price 12 €
Location: Country-DE Germany, 06112 Halle
Seller: MEDCO Congreß-und Handels GmbH Halle

; unused from stock

Category: 110 accessories for machine tools
approved
dealer
New in: used
Location: Country-DE Germany, 63303 Dreieich
Seller: KIRCHGEORG Werkzeugmaschinen GmbH

diameter: 255 mm numer of jaw: 3 Stück bore: 82 mm Total height: 130 mm weight: 25 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 108 welding machines
approved
dealer
New in: used
Price 10 €
Location: Country-DE Germany, 06112 Halle
Seller: MEDCO Congreß-und Handels GmbH Halle

; ready for use

Category: 102 lathes
New in: used
Price 3.500 €
Location: Country-at Austria, 2355 Wiener Neudorf
Seller: HESSE+CO GesmbH

: 355 mm : 2.000 mm : 36 mm : 5,5 kW : 200 mm : 380 mm : 3.400 mm : 1.100 mm : 1.300 mm : 2.450 kg without bridge 3 jaws chuck chuck cover 4-fold tool holder steady rest rolling centre no users manual Does not comply with the present industrial safety regulation swing over bed: 355 mm turning length: 2.000 mm spindlebore: 36 mm revs: 18-2.500 (18) motor: 5,5 kW jaw chuck: 200 mm bed width: 380 mm length: 3.400 mm width: 1.100 mm height: 1.300 mm weight: 2.450 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109 other metal working machines
approved
dealer
New in: used
Price 75 €
Location: Country-DE Germany, 06112 Halle
Seller: MEDCO Congreß-und Handels GmbH Halle

; hand, ready for use, see photos

Category: 104 grinding machines
approved
dealer
New in: 1985
Location: Country-de Germany, 74080 Heilbronn
Seller: Gustav Schönberger GmbH

grinding diameter: 355 mm grinding length: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m tail stock coolant device Technische Daten / technical details: gr. Umlaufdurchmesser / max. rotary diameter 355 mm gr. Schleiflänge / max. grinding length 1000 mm Spitzenhöhe / center height 180 mm Tischschwenkung / turnability of the table -2,5 - 12 ° Drehzahl Werkstückspindelstock / speed work piece spindle head 11,2 ? 355 UpM /rpm Schleifscheibendurchmesser/ diameter of grinding wheel 630 mm Gewicht der Maschine ca. / weight ca. 5900 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindli ...

Category: 101 boring mills and machining centers
approved
dealer
New in: used
Price 12 €
Location: Country- ,
Seller:

; from stock, unused, ready for use, see photos

Category: 102 lathes
approved
dealer
New in: 1985
Location: Country-de Germany, 74080 Heilbronn
Seller: Gustav Schönberger GmbH

turning diameter over bed: mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw face plate diameter 1600mm 3 way bed headstock and bed are separate bed consist of 3 pieces 2 supports 2 steady rests diameter 100-600mm Digital read out at support 1 and support 2 tail stock Technische Daten / technical details: Drehdurchmesser über Fundament/ rotary diameter over foundation 2500 mm Drehdurchmesser über Bett / rotary diameter over bed 2000 mm Drehlänge / turning length 10000 mm Werkstückgewicht zwischen Spitzen / workpiece weight between centers 16000 kg Antriebsleistung / drive cap ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)