子类目
(三级类目)
生产厂家:
(品类: 706)
编号：26-0064 特色 卷 1000 L 材料编号 V2A 外部表面 IIID IIID 内部曲面 总高1845毫米 汽缸高度：1250毫米 直径1130毫米 重量：184公斤 描述 表土： 拍板底 螺纹套筒 DN50 井盖 CIP连接器 气闸连接 DN50 圆柱体： 冷却套 绝缘 液位指示器 样品接头DN25 温度计用的浸杆套筒 底盘： 带盘阀的前拉残留排水管 DN50 4英
Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data Line type: Complete automatic can filling line Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray Controls: PLC Siemens S7, Siemens SIMATIC HMI Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, ...
Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data Manufacturer: O+H / KHS Model: Hansacan can filler Seamer: Ferrum can seamer, F 505 G Year of manufacture: filler 1992, seamer 2010 Machine typ ...
Overview This crate palletizing and depalletizing line was integrated in 2006 by Profipack Verpackungsmaschinen GmbH (Austria) around two Yaskawa Motoman NX100 articulated robots - one palletizing cell and one depalletizing cell - together with a Logipack vertical pallet strapper. It is still installed at a German brewery, where it palletized and depalletized crates for beer, CSD and mineral water production until the whole line was stopped. Because it served multiple product lines, it handles a wide variety of crate formats on Euro pallets. The machine can be visited on request. Technical data Manufacturer / integrator: Logipack (vertical strapper), Profipack Verpackungsmaschinen GmbH (system integrator, Austria) Robots: 2x Yaskawa Motoman NX100 articulated robots (palletizer + depalletizer) Year of manufacture: 2006 Machine type: crate palletizing and depalletizing line Capacity: 33,00 ...
可获得性：立即 类型：90 机器尺寸（长×宽×高）：2.5 x 2.5 x 2.2 米 重量：4000公斤 技术文档：可查阅 全自动标签机 克罗内斯Prontomatic BR720-12-480-6-4-180 90型： 容量：16,000瓶/小时 瓶子1号：1.0升VDF瓶 直径：89.5毫米 高度：306.5毫米 正体标签：120 x 98 毫米 粘合高度：27 毫米 胸标：92.5 x 44毫米 粘合高度：183毫米 背面标签：75 x 90 毫米 胶粘高度：27 毫米 瓶子2号：0.7升VDF瓶 直径：77.5毫米 高度：286.5毫米 正体标签：120 x 98 毫米 胶粘高度：30 毫米 育幼标签：82.5 x 44 毫米 粘合高度：172 毫米 背面标签：75 x 90 毫米 胶粘高度：30 毫米 该机器直到2026年4月之前均无技术故障运行。 随后由合格人员完成拆除工作。 - Prontomatic 720-12-480-6-4-180 - 左右 - 钢胶滚筒 - ...
可获得性：立即 机器尺寸（长×宽×高）：6.0 x 1.5 x 2.5 米 重量：1500公斤 技术文档：可查阅 容量：2600箱/小时 笼子洗衣机在2026年4月之前一直运行，没有出现任何 术问题。随后由合格人员完成拆除工作。 格式：0.2升 / 0.5升 / 1.0升VdF瓶 -Sotec有限公司 - WAH 26型 -建于1992年 - 容量：2600 K/h Kettner 箱垫圈机，型号为 WAH 26，于1992年制造。其每小时产出量可达2600个箱子，适 合用于现有的饮料箱清洗管道
可获得性：立即 数量：2 机器尺寸：0.5 x 0.5 x 1.5 米 重量：50公斤/件 打印头：冲洗并晾干： Serial.No：KI940 连环。编号：KI941 - 2台Dating Linx瓶子打印机 - 1 x 盖子上的日期 - 1 x 背面标签上的日期 该机器直到2026年4月之前均无技术故障运行。 随后由专业人员完成拆解工作 单价打印机：3.950,00 欧元 VB
可获得性：立即 文档：有 机器尺寸（长×宽×高）：1.0 x 1.0 x 1.0 米 重量：约150公斤 完整的箱控系统在2026年4日前均无技术问题运行。随 由合格人员完成拆除工作。
制造/大修年份：2000/2022 2022年进行全面机械/电气大修（SPS 7） 技术文档：可查阅 机器尺寸（长×宽×高）：2.5 x 1.8 x 2.2 米 重量：2500公斤 该旋钮在2026年4日前一直运行，没有出现技术问题。 后由合格人员完成拆除工作。 工作方向：右-左 运输高度：最小740毫米 容量：25,000瓶/小时 驱动电机机： 斜齿轮电机 2.2千瓦 240/400 伏特 50 Hz 驱动电机高度调节： 蜗轮电机 0.37千瓦 240/400 伏特 50 Hz 驱动电机鼓风机：三相电机 1.5千瓦 240/400 伏特 50 Hz 瓶尺寸：瓶径最大100毫米 最小40毫米 瓶身高度：最大350毫米 最小150毫米 气动系统：标称宽度4 名义压力 6.3 bar 气动气缸： 皮带张力直径40 柱张直径100 2022年对机械进行全面检修，费用约为5万欧元 2 ...
可获得性：立即 机器尺寸（长×宽×高）：0.8 x 0.8 x 2.0 米 体重：150公斤 瓶子干燥工作一直顺利进行，直到2026年4月才出现技 问题。随后由合格人员完成拆除工作。 包括： - 1 帕克斯顿高性能离心鼓风机 XT 500 4kW - 2片不锈钢重型气叶片 580毫米LG。 - 2个不锈钢气叶片支架 三级调整 - 1个带附件的不锈钢底架 鼓风机 - 1个不锈钢空气分流器，2个DN 76毫米 - 1个XT 500鼓风机隔音箱 - 4个不锈钢罩，四面皆为 防溅护板 附加设备： - 1件Geset不锈钢喷嘴，40×2毫米 包括管道和软管 喷墨前先吹盖 Gesete XT 500瓶子干燥机于2014年制造，设计用于在标签机（Etima 前干燥瓶子。它能去除残留水分，确保标签的良好 着
概述 该拆解器由德国公司奥托·弗莱舍（Otto Fleischer）于1993年制造。Rota/1/A 型号为单头拆箱机。它仍然安装并立即使用。技术数 瓶型处理：0.7升（GDB）及其他 单头操作 90 进出设计 工作压力：约6巴 电源：380 V / 50 Hz / N / PE 连接负载：约 4 千瓦 控制电压：24 V
Overview This SMI TF 300 tray forming machine, manufactured in 2002, is designed for the automatic forming of trays in beverage packaging lines. The machine was previously used for packing 4x6x0.5L sixpacks into trays and achieves a capacity of up to 23 packs per minute, making it suitable for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data Manufacturer: SMI Model: TF 300 Machine type: Tray forming machine (tray erector / tray packer) Year of manufacture: 2002 Capacity: approx. 23 packs per minute Application: Tray packing of multipacks (e.g. 4x6x0.5L sixpacks) Equipment Automatic tray forming system Suitable for beverage multipack tray applications Integration capability into existing packaging lines
Overview This Twin Pack MDEL handle applicator, manufactured in 2002, is designed for the application of carry handles on beverage multipacks. The machine was primarily used for producing various multipack configurations, including 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, and 2x3x1.5L, offering flexibility across different bottle sizes and packaging formats. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data Manufacturer: Twin Pack Model: MDEL Machine type: Handle applicator (carry handle machine) Year of manufacture: 2002 Application: Application of carry handles for beverage multipacks Formats: 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, 2x3x1.5L Equipment Automatic carry handle application system Suitable for various multipack configurations Integration capability into existing bottling and ...
Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Technical Data Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab Model: Octopus 1800 BFTS Machine Type: Automatic ring pallet wrapper Year of Manufact ...
Overview The dynamic beer filtration system 1VDCF-5-5 was manufactured in 2024 by the German company BECA. The filtration system is used to filter beer. Techn. Data Whole Plant Output: 5 hl/h Filter surface area: 5 m² Condition: as new Weight empty: approx. 800kg (net) + 300 kg (el. cabinet) Dimensions (L x W x H): 2300mm x 1300mm x 2200mm Dimensions electrical cabinet: 1000mm x 800mm x 2000mm Energy requirement: 4kW Energy consumption: 0,7-1,0 kW/hl Temperature increase: 5°C per minute due to ceramic plates Operating pressure: 1-4,5 bar Size of the pores: 200nm Features: High quality beers immediately after start up Higher dry content of the filtered yeast Extremely low energy consumption Low maintenance effort Filtration at low pressure No additional tools or additives required Modular design to increase the capacity in future Integrated CIP system
概述 以下六组分混频器由德国制造商Famix于1993年制造。调 台可以进行全面翻新并享有保修。该机器目前状态 时可购买。 技术细节 容量：最大30,000升/小时 饮料 六组分混合器 尺寸（长×宽×高）：3,200毫米 x 1750毫米 x 2800毫米 流量计 投码泵 真空脱气 Brix测量 二氧化碳测量 二氧化碳测量 二氧化碳压力控制 电导率测量 电气数据 工作电压 400V/230 V 50 Hz 控制电压 42V 交
Overview This FAMIX-Falterbaum 20000TD premix system, manufactured in 2000, is a fully automatic beverage mixing and carbonation system designed for continuous dosing, mixing, deaeration and carbonation of beverage components before filling. The system is suitable for the production of mixed and carbonated beverages using components such as water, syrup and CO₂. It is built as a compact stainless steel skid with integrated tanks, pumps, valves, piping, instrumentation and control cabinet. The premix unit has a capacity of approx. 22,000 l/h and includes two vertical stainless steel pressure vessels, which can be used for product deaeration, buffering and carbonation. The liquid flow is controlled via automated pneumatic valves and a manual stainless steel pipe connection panel, allowing flexible routing for production and CIP operation. The machine is operated via an integrated FAMIX c ...
Overview This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Technical data Capacity: 30,000 litres/hour Application: Carbonated mineral water Configuration: Carbonator with pumps, tank, and accessories CO₂ rate: max. 8 g/litre Drive: Siemens S7 Scope of Delivery Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system Pump system Tank | KHS Control system | Siemens | S7
Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Technical Specs Capacity: approx. 50 hl/h (tandem system, 24h operation) Filtration type: Crossflow (microfiltration) Number of modules: 48 Operating temperature range: 0°C to 70°C Equipment: Pumps, integrated CIP system, complete piping, control system Control system: Siemens S7 with Siemens OP07 HMI Automation level: Fully automatic Equipment ...
Overview This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available. Technical Details Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc
Overview The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored. Technical Details Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Heig ...
Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operati ...
Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + ...
Overview This crate washer was manufactured by the German company Klotzki in 2011. It is designed for cleaning beverage crates and has been regularly serviced. The machine is immediately available and was last used in a beverage production plant. It shows regular signs of use, but is still in working condition. The operator platform is not included in the scope of delivery. Technical data Capacity: 1,500 – 2,500 crates/h (adjustable) Treatment time per crate: ~91 sec at 1,700 crates/h, ~65 sec at 2,400 crates/h Crates in machine: 48 pieces Crate format: customizable Running direction: transverse Spray pressure: approx. 4.0 bar Lye tank volume: approx. 1.0 m³ Treatment section length: approx. 34 meters Main pump: 15 kW, 80 m³/h Drive units: Main drive: 0.33 kW Crate infeed: 0.55 kW Crate outfeed: 0.55 kW Dimensions: Length: 3,000 mm Width: 2,000 mm Height: approx. 5,000 mm Crate inf ...
Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data Manufacturer: Krones / Krones Zierk GmbH Model / Type: K6W-25-S-E Machine Type: Crate washing machine Year of Manufacture: 2000 Application: Washing / cleaning of beverage crates Construction: Stainless steel machine housing and frame Conveyor System: Integrated slat-cha ...
Overview This 5 hl brewhouse was manufactured in 2016 by easybräu. The brewhouse consists of 2 vessels and is designed for beer brewing. It is currently still installed and can be visited at any time. The system is electrically heated; steam heating is possible. Valves are manually operated. The brewhouse is being sold because a larger system has been purchased. The brewhouse is immediately available and can be seen in person upon request. Technical data Capacity: 5 hl Configuration: 2‑vessel brewhouse, manually operated valves Heating: Electric (steam possible) Temperature control: Yes Recipe management: Recipe storage available Utilities: Electric power (steam optional)
Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery 4 units Brewhouse | Shandong | 20-25HL | 2019 1x mash tun 1x lauter tun 1x boiling or wort tun 1x whirlpool Manual shut-off valves Cooling of fermentation tanks is automated Malt mill | Shandong | 2019 Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 200 kg/ h Oil-fired, but can also be operated with gas by replacing the burner Wort cooler, 2-stage | Shandong | 2019 2x cooling un ...
Overview This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end. The equipment is still installed and connected and can be viewed in person at any time. Technical details Capacity: max. 1,500 bph (1,000 bph were actually run) Bottled product: Beer Included formats: 0.33l longneck, 0.5l NRW Closure: Crown cap Scope of delivery Bottle washer | SEN | 1989 (overhauled and installed in 2020) Isobaric filler block | Shandong Yuesheng | 2019 Rinsing positions: 14 Filling positions: 12 Capping positions: 5 With pre-evacuation Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW D ...
Overview This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data Filling system: Isobaric (for beer and other carbonated beverages) Capacity: 900 bottles/hour Bottle formats: 0.25 L – 1.0 L Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system Electronic fill height adjustment Stainless steel construction
Overview This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data Capacity: 6,000 bph (1.0 l bottles) 7,000 bph (0.75 l bottles) Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) Bottle height: 150–370 mm Number of filling valves: 36 Filling principle: Low-pressure vacuum filling Running direction: Left to right Filling valve type: Electropneumatic Special features: Programmable bottle parameters with automatic adjustment for bottle height and fill level Hot filling capable with auto shutdown at temp ...
