饮料机 二手 出售 (2,155)

Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

不锈钢罐带包覆，安装在运输框架上。附加标题：水� ��、包覆不锈钢罐，容量：4000升，压力：0.99巴，长度 ：3.25米，宽：1.4米，重量：600公斤，材料：不锈钢， 位置：圆顶结构，基座结构：运输框架，特点：绝缘� ��进气口DN 50，出口DN 40

Velo的移动kieselguhr滤波器，附加标题：带有垂直滤波� �件;制造年份约2005年，滤芯面积约5平方米，容φ：0.69 ，转速：1656/分钟，功率：0.55/0.66千瓦，电流：2.98/1.7 1安特，电压：230/480伏，频率：50/60赫兹，长度：2.30� �，宽度：1.30米，高度：1.80米，重量：1000公斤，特点 ：配备接收容器、调频器、动力单元及控制装�

涡轮空气涡管 DN40 装在车架上，移动式，附加标题：涡轮空气;制造年份 2000年，长度：1.30米，宽度：0.60米，高度：1.30米，重 量：150公斤，操作/控制：半自动，控制箱上的按钮和 西门子TD 390显示屏，材料：不锈钢，底座结构：可移动，配备2 个轮子（框架），特点：两部件喷气;西门子控制面板 TD390

Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement), Crushing capacity: 6000 b/h, Current: 6,5 A, Voltage: 380 V, Frequency: 50 Hz, Length: 15220 mm, Width: 1300 mm, Height: 22600 mm, Weight: 700 kg, Base construction: on dome feet, Features: Fragment tub, noise protection box, slot for manual disposal of single bottles

带盖的开放式不锈钢罐，附加标题：开放式不锈钢容� ��，容量：14500升，长度：2300毫米，宽度：2300毫米，� ��度：4000毫米，材料：不锈钢1.4301，位置：垂直，底� ��结构：3 x 英尺，功能：盖子;通道梯;浮子�

Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel., Additional title: Kieselguhr and sheet filters as a combination design; years of construction 1979, Capacity approx.: 380 hl/h Combination filter - filtration area approx. 76 - 108m2 KG; 180 - 253m2 Sheet with beer filtration, Operating pressure: 8 bar , Power: 6 kW, Voltage: 220/380 V, Frequency: 50 Hz, Length: 10100 mm, Width: 1320 mm, Height: 1750 mm, Formats: Square filter elements, Operation / Control: Built-in control panel, Material: Stainless steel, Position: Horizontal, Base construction: Frame, Features: Filter plates; Filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump, Layer patterns: Vertical row arrangement

垂直不锈钢罐体，带框架冷却及多种配件，附加标题� ��带冷却套套，容量约2900升，宽度：1.85米，高度：2� �，重量：400公斤，材料：不锈钢1.4301，位置：垂直， 底座结构：3英尺，特点：冷却套套（0.5巴，30升）;储 罐出口DN50

带有多种连接的立式不锈钢罐，附加标题：立式不锈� ��罐，容量：5000升，宽度：1.45米，高度：3.8米，重量 ：350公斤，材料：不锈钢，位置：垂�

垂直不锈钢罐，最近用作CIP罐。附加标题：CIP罐;制造 年份1995年，载重：7000升，宽：1.8米，高度：3.2米，� �量：350公斤，材料：不锈钢，位置：垂直，基座结构 ：3英尺，特点：侧门;水位指示器;出口DN65

垂直保温不锈钢水箱。最近用作CIP罐，附加标题：带� ��缘的立式不锈钢罐;建造约2000年，容量：7000升，宽� �2.2米，高度：3.1米，重量：800公斤，材料：不锈钢， 位置：垂直，基座结构：3 x 英尺，特点：侧面人道;绝�

附加标题：垂直储罐，容量：5244升，最大允许操作压 力：5巴，工作温度：20摄氏度，宽度：约1600毫米，高 度：约3200毫米，材料：不锈钢1.4541，位置：垂直，底 座结构：3 x 英尺，特征：人道;安全阀;CIP管�

固定片过滤器，带有二次方形滤芯排列，附加标题：� ��菌滤器，容量：140 hl/h，板数：119片，长度：7500毫米，宽度：1600毫米，� ��度：2000毫米，格式：二次滤芯 - 100厘米 x 100厘米，层状排列：过滤元件的垂直行排�

Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement., Capacity: 60 hl/h, No. of plates - KG Filter: 34 Plates , No. of frames - KG Filter: 35 filter frames, No. of plates - sheet filter: 150 Plates, Length: 6500 mm, Width: 1000 mm, Height: 1500 mm, Formats: Quadratic filter elements - 60 cm x 60 cm, Base construction: Frame, Features: Manual filter element compression , Periphery: Kieselguhr dosing unit with dosing pump, Layer patterns: Vertical filter elements in a row

由水平堆叠的滤波元件组成的滤波系统。过滤完成后� ��基斯尔古尔通过离心力排出容器。容量：140升/小时� ��容器容积：26升，长度：约4000毫米，宽度：约2000毫� ��，高度：约3500毫米，材料：不锈钢1.4541（容器），� ��座结构：立足式，特点：基斯尔古尔投药容器带投� �泵;泵;配件与测量技�

Functioning yeast propagation consisting of 3 cylindrical tanks with jacket cooling. 1 tank is additionally equipped with a conical cooling and serves as a pure breeding tank for yeast production., Additional title: Yeast propagation plant with 3 coolable pressure tanks, Capacity: 32 hl, Pressure: 2 bar test pressure 2,6 bar, Width: 1,3 m, Height: 4 m, Weight: 500 kg, Position: vertical, Base construction: on 3 feet, Features: Operating yeast propagation system, every tank with cooling jacket,1 tank with additional cooling jacket for the cone, used as pure culture tank for yeast propagation , Periphery: After consultation we can equip the tank with the desired fittings.

consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station - Control cabinet with operating panel, Additional title: juice heating plant for pasteurization, Capacity: 10000 l/h, Perm. working overpressure: 16 bar test pressure 20,8 bar, Heat exchange surface: 21 m², Length: 5,6 m, Width: 2 m, Height: 2,4 m, Operation / Control: Control cabinet with operating buttons, Material: Stainless steel, Base construction: Frame, Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

圆柱形580升发酵与储存罐——乙二醇冷却，4个冷却区 （1个锥体，3个圆柱体）——旋转锥体——不锈钢—� �绝缘——支撑裙板，附加标题：室外罐，容量：58000� ��，工作压力：2巴，工作温度：20摄氏度，冷却面积� �29平方米，1个锥形冷却;3 个侧壁冷却系统，高度：10.68 米，材料：不锈钢，位置：垂直，基座结构：短裙边� ��撑，特点：罐式冷却;旋转圆锥体;保温层;框架;出口D N100;CIP连接;2个温度传感器;样品�

水平不锈钢压力罐，配备加热线圈和各种配件，附加� ��题：水平压力罐，容量：15000升，工作压力：4大气� �，工作温度：20摄氏度，材料：不锈钢，位置：水平� ��特点：内部加热管道;水位指示器;CIP连接;温度计;采� ���

带有方形滤芯的片状过滤器，垂直悬挂，排列成行。� ��压过滤片压机。液压控制由内置电气控制面板实现� �附加标题：100张100 x 100厘米的灭菌滤芯，工作压力：8巴，板材数量：100片 ，板面积：1平方米，长度：5.5米，宽：1.5米，高度： 2.3米，操作/控制：带操作按钮的控制柜，材料：不锈 钢，底座结构： 框架，特点：液压机;控制面�

CIP系统由三个带管道的矩形罐组成。附加名称：清洁� ��统，含3个矩形容器，容量1×1000升，容量2×2000升，� �度：3.5米，宽：1.5米，高度：1.4米，材料：不锈钢1.4 301（AISI 304），底座结构：矩形容器，特点：2个20升CIP容器;1� �CIP船，10磅;水位指示器;人道，DN65连�

不锈钢储罐，垂直立式，配备冷却套。附加标题：可� ��却罐，容积：14100升，工作压力：0.99巴，工作温度� �100摄氏度，冷却套筒操作压力：3巴，宽度：约2.9米� �高度约2.8米，材料：不锈钢1.4310，位置：垂直，底座 结构：3个可调高度脚，特点：冷却套筒;人道;带照明� ��视窗;混合进气口;取样阀;清洁连接;漩涡破坏�

Matek Mix-Kult System for mixing ready-made syrup with water or mixing several components. The system is mounted on a base frame. The individual units are easily accessible and can be observed as they work. All necessary fittings, control and display devices as well as the control cabinet are installed. The mixing plant is fully automatic. Syrup and water are dosed in a predetermined ratio, mixed evenly, deaerated and impregnated. The finished beverage is stored in the beverage tank, from which it is then optionally piped to the filler via a pressure booster pump., Additional title: Inline mixing unit, Capacity: 8000 l/h, Operating pressure: 10 bar, Volume: 555 l, Power: 10 kW, Water: 2,5 atm, Compressed air: 5 atm, Length: 1900 mm, Width: 900 mm, Height: 2300 mm, Weight: 1000 kg, Material: Stainless steel, Base construction: Frame, Features: Mixing and dosing vessel; beverage tank; Mohn ...

水平啤酒输送槽，配有观察玻璃、压力计、井盖和底� ��底部的出口。带滑轨和起重机眼，容量：4993升，操� ��压力：2 bar bzw。3 kp/cm²，位置：水平，基座结构：框架上带导轨，功能 ：视窗、压力计、人孔、凹槽底部出口、起重机�

带多种配件的绝缘和包覆不锈钢压力罐，附加标题：� ��缘罐，容量：12800升，压力：4巴，温度：20摄氏度， 长度：5.1米，宽度：2.1米，重量：2000公斤，材料：不 锈钢，位置：正体，特点：绝缘包覆，DN65出口，井盖 ，2个喷�

CIP罐系统由3个通过管道连接的罐组成。较小的储罐分 为两个部分。附加标题：3个带管道连接的矩形容器， 每个总容积保温容器约1300升，总容积额外容器约1000� �，分为两个舱室，容量分别约为700升和300升，材料： 不锈钢，位置：垂直，特点：2个保温容器+1个额外容� ��（分为两个部分�

Kieselguhr过滤后啤酒二次过滤系统，操作压力：10巴，� ��作温度：140摄氏度，容积：169升，长度：4.10米，宽� ��：1.30米，高度：2.0米，重量：1700公斤，材料：不锈 钢，位置：立式，基座结构：框架，功能：汇流过滤� ��、啤酒过滤器、水/CIP过滤器、滤器冲洗及化学再生� ��元�

带有多种配件的立式不锈钢储罐，附加标题：立式不� ��钢储罐，容量：14100升，工作压力：0.99巴，工作温� �：20摄氏度，宽度：约2.8米，高度：约2.8�

This flash pasteurization system is used to stabilize beverage quality through gentle pasteurization. The product is heated to pasteurization temperature via a plate heat exchanger for a defined period of time and then cooled in a controlled manner. The system consists of: - Tube heat exchanger with hot water buffer tank for supplying hot water -Plate heat exchanger for flash pasteurization of the product This combination ensures reliable, uniform heating to guarantee long-term product quality. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: In-line pasteurisation plant for beer, built between 1987 and 1999, Capacity: 35000 l/h, Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement, Features: 1 x plate heat exchanger, 1 x tube heat exchanger, 1 x hot water pu ...

This label and fill level inspection system from Heuft Systemtechnik GmbH (built in 2010) is designed for high-frequency fill level inspection, label checking, and product rejection. The system features the Heuft Delta FW 10 rejection unit for precise and reliable removal of non-compliant bottles. With a capacity of up to 40,000 bottles per hour, it enables efficient quality control in high-speed production lines. The device has a compact footprint of 0.44 m × 0.80 m × 2.24 m and weighs 150 kg, making it easy to integrate into existing filling lines. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Heuft Spectrum TX, Capacity: 40000 bottles/h, Length: 0,44 m, Width: 0,80 m, Height: 2,24 m, Weight: 150 kg, Features: Heuft ejection unit Delta FW 10