Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) bottles.The system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data Direction of operation: RM Capacity: approx. 2,500 bottles per hour Speed range: approx. 800 – 3,00 ...
Overview This rotary cold glue labelling machine was manufactured in 2021 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, primarily in the beer industry. It is equipped with one cold glue labelling aggregate and is prepared for the installation of an additional unit. The system features a mechanical bottle table drive (control cam system) and a Krones glue pump for consistent label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 6,000 bottles/hour Formats: 0.33 L / 0.5 L glass bottles Application: Labelling of glass bottles (beer) Configuration: Rotary machine with 1 cold glue labelling aggregate (prepared for 2nd unit) Label positions: Body / wrap label, neck / chest label Utilities: 400 V / 50 Hz / GND / N Scope of Delivery Labelling machine | GERNEP | Labetta 4/3/8 480 1A | 2021 | Rotary cold glue lab ...
GERNEP labelling machine for cold-glue labelling of glass bottles., Additional title: cold glue labeling, Capacity: 9000 bottles/h, Power: 8 kW, Current: 16 A, Voltage: 400 / 230 V, Frequency: 50 Hz, Compressed air: 5 bar; consumption 42 m³/h, Length: 2100 mm, Width: 1600 mm, Height: 2100 mm, Weight: 2300 kg, Formats: 0.5 l goiter neck bottle, 0.5 l Euro bottle; 0.33 l longneck bottle, Running direction: from right to left, Operation / Control: Siemens S7-200, Position: free standing, Features: 0.5-litre goiter neck hanger bottle: hanger/torso/back, 0.5-litre euro bottle: chest/torso/back, 0.33-litre longneck: neck ring/torso/back
标签机Labetta 4/3/10 640 2A 2Sk专为不同瓶型标签设计。附加标题：冷胶标签，功 /循环：7000瓶/小时，功率：8千瓦，电流：永久连接 电压：400/230伏，频率：50赫兹，压缩空气：5巴，耗 42立方米/小时，长度：3100毫米，宽度：2200毫米，高 度：2200毫米，重量：3200公斤， 特点：Labeller Herma 400S，周边：2名检查员 - 长 x 宽 x 高 = 1.30 x 0.85 x 1.70 米 - 300 kg
Overview The labeler was manufactured in 2013 by the German manufacturer Gernep. The machine was regularly maintained by OEM and had a full renovation in the end of 2019. The labeler is already dismantled. Technical details Output: approx. 8,500 bottles/h Formats 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. 2 different front label format parts 33 cl longneck; 75 cl Bierre Belge bottle Corked; Neck, front and back label. Stainless steel bottom frame Rotation: clockwise Right to left bottle transport 5912 running hours Air driven glue pumps replaced by electrical driven glue pumps.
概述 这款冷胶标签机由德国Gernep公司于2008年制造。该机器 设计用于使用冷胶技术贴标签，并立即上市销售。技 数据 制造商：Gernep 型号：Labetta 2010年4月3日 640 2A 年份：2008 旋转方向：左手机器（瓶板逆时针旋转） 名义容量：14,000瓶/小时 可调节3,000 - 15,000瓶/小时 2个冷胶装置 标签位置：瓶体、正面、背面 瓶装：0.5升 NRW瓶 0.33升维希瓶 0.33升艾尔
市面上有Gernep自粘贴标签机。标称容量：2500瓶/小时 运行方向：RM，吞吐量控制范围：800-3000瓶/小时，容 格式 1 直径/高度：66毫米/280毫米，容器规格 2 直径/高度：85毫米/316毫米，容器容量半：500毫升/1000 升，标签尺寸X/Y：160毫米/17毫米，标签贴式：U型密 条，输送机高度：1000毫米。包括自粘式分配器单元 可折叠式闭合。文献资料。现场检查是可能的
A cold-glue labeling machine Gernep is available. Direction of travel: LM, nominal output: 5000bottles/h, control range: 1000-5500bottles/h, gluing height: 330mm, bottle format height range: 297mm-350mm, bottle format diameter range: 74mm-89mm, bottle material: glass, bottle volume: 0.75/1l, bottle content: wine, application: body/neck ring label/back label. Cold-glue format 1: label length range: 25mm-160mm, max. label height: 150mm, max. label height bottom edge/top edge: 15mm/320mm. Cold-glue format 2: min. label length: 25mm, max. label height: 115mm, max. label height bottom edge/top edge: 15mm/130mm. Including dating, optical orientation, upper-part height adjustment, glue pump and two cold-glue units. Documentation available. An on-site inspection is possible.
额定输出：5000瓶/小时，运行方向：LM，控制范围：100 0-6500瓶/小时，瓶料：PET/玻璃，瓶装容量：200ml/250ml/40 0ml/500ml/500ml/750ml/1000ml/1200ml，玻璃瓶高度范围：59mm-121 mm，玻璃瓶直径：65mm/70mm，应用：颈环标签/本体标签/ 背面标签/环绕标签。包括三个自粘分配器、高度调节 、中央润滑、破损检测、瓶子计数器、夹星、旋转臂 Rotina的Etima热熔胶和颈环。文档可查。现场检查是可 能的
二手
市面上有Gernep冷胶和自粘贴标签机。额定容量：8000瓶 /小时，旋转方向：顺时针，控制范围：1400-9000瓶/小 ，瓶装容量：700毫升，防篡改标签：可用，瓶装：10 ，瓶内成分：烈酒，应用：颈环标签/本体标签/背面 标签/防篡改标签，包括光学标签检查、日期编码、自 粘分配器、两个冷胶单元、瓶子计数器和两种不同的 锁。文档可查。现场检查是可能的
A cold-glue labeling machine Gernep, which was used in the food industry, is available. Nominal output: 10000bottles/h, running direction: LM, control range: 2000-12000bottles/h, gluing height 1/2: 330mm/230mm, bottle format height 1/2: 307mm/260mm, bottle format diameter 1/2: 90mm/68mm, bottle material: glass, bottle type: VDF/NRW, bottle volume: 1000ml/500ml, application: body label/neck label/back label, container condition: hot. Cold-glue format 1: label length range: 25mm-140mm, max. label height: 150mm, label height lower edge/upper edge: 15mm/320mm. Cold-glue format 2: label length range: 25mm-140mm, max. label height: 150mm, label height lower edge/upper edge: 15mm/220mm. Including two cold-glue units, dating, sensor label inspection, breakage detection, overload clutch, additional accumulation switch and center slide. Documentation available. An on-site inspection is possible.
A Gernep cold glue labeling machine that has been used in the brewery industry is available. Rated capacity: 5000bottles/h, direction of operation: LM, control range: 1000-6000bottles/h, glue application height: 330mm, bottle material: glass, bottle volume: 330ml/500ml, min. label length range: 25mm-130mm, max. label height: 130mm, max. label height lower edge/upper edge: 15mm/320mm, application: swing-top label/body label. Including cold glue unit, prepared wet glue unit, date coding, height adjustment, overload clutch, infeed and outfeed tunnel and foot extension with floor plate. Documentation available. An on-site inspection is possible. Expected to be available from the end of May 2026.
Overview This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue stations and three self-adhesive labelling stations, offering flexible labelling configurations for a variety of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical data Capacity: 8,000 bph (6,500 bph with photoelectronic orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, labelling height 330 mm, steel glue roller Station 2: Wet glue, labelling height 230 mm, steel glue roller Stations 3–5: Self-adhesive Orientation: Photoelectronic bottle orientation via cap Prepared for orientation via bottle cam Electrical height adjustment Operating voltage: 400 V Frequency: 50 Hz Control unit: Siemens S7-200, Touch TD integrated Direction: Right to ...
格式部件：0.375 Bord 0.375 Schleg 0.5 Bord 0.75 Bord？0.75 Schleg1.0？Bord？ ？1.0 Schleg1.5l Bord？ ？1.5 SchlegSeriennr.：？15231
用在自粘胶上？标签和湿胶 瓶装零件尺寸：0.375升、0.75升、2.0
出售的是制造商Gernep的标签机。 该机器于2021年进行了全面检修，之后很少使用。 目前机器尚未安装背标设备，但如果需要，可以提供 技术数据： 制造商：Gernep 型号：Labetta 4/3/8 年份：2001年 容量：8,000 bph 瓶型：欧式瓶 - 控制：西门子S7，机器通过FU频率控制 - 进出口：左右 如需更多信息，请洽询
出售的是制造商Gernep的标签机。 该机器于2021年进行了全面检修，之后很少使用。 目前机器尚未安装背标设备，但如果需要，可以提供 技术数据： 制造商：Gernep 型号：Labetta 4/3/8 年份：2001年 容量：8,000 bph 瓶型：欧式瓶 - 控制：西门子S7，机器通过FU频率控制 - 进出口：左右 如需更多信息，请洽询
格尔内普·拉贝塔标签系统。建于2013年，设有11个瓶 ，3个自粘标签分配器和2个湿胶标签分配器。每小时 出6000瓶。伺服板（也适用于罐头）。自粘剂格式可 ：200毫升/330毫升/500毫升/750毫升。可使用湿胶格式 200毫升，其他格式可加装。包括跑步机和唱盘。如需 更多详情，请联系我们。
2013年推出的GERNEP Rollfed 24-1056 2RA是一款可靠的卷筒标签机，适用于PET和玻璃瓶，具 高生产能力。配备24个工作站和2个粘合单元，实现 间断的运行和精确的贴标。尤其适合餐饮行业
提供来自制造商GERNEP GmbH的瓶子旋转标签机。正面和背面标签、湿胶/冷胶 元、自粘单元。可通过安排进行检查
湿胶贴标机 Gernep Labetta 建于 1999 圆轮 类型 3/2/6 BR 胸围、颈部 - 背面标签 瓶型 0.33 + 0.50 + 0.70 + 1.00L 玻璃瓶 每小时 5,000 瓶 运行方向 左 - 右 顺时针
工位：6，贴标能力：3000-4000/h，贴标：环绕式不干胶 签，容器格式：200ml-750ml，瓶子格式：330l Vichy/Longneck/30cl BNR，运行方向：左右，旋转方向：顺时针。可用的文 。可以进行现场检查
Gernep 贴标机 Labetta 4 / 3 / 10 640 A 建设年份：2013 产量： 7,500 bph 运行方向：从右到左 旋转：顺时针 底座由不锈钢制成 格式化部件： - 33 cl 维希 - 长颈 - 30 cl BNR ; 颈部、正面和背面标签。 - 2 种不同的正面标签格式部件 33 cl 长颈; - 75 cl Bierre Belge 带软木塞的瓶子;颈部、正面和背面标签。 气动胶水泵被电动胶水泵取代。 2020 年推出环绕式贴标机，此后湿胶标签减少。 2022 年 5 月，剩余的湿胶标签仍在运行（剩余库存）——机器 留。 机器仍然在瓶子生产线上，只是作为传送带，但仍然 运行。 该机器将生产到 2023 年 11 月中
伺服驱动贴标机制造商：Gernep 建造时间：2017 年 2020 年大修 2 个用于背面和正面的冷胶站 + 颈部标签 1 种格式用于 Steinie 3 种格式长颈和 Appo 33 厘升后 - 前 - 颈（1 种格式）
贴标机准备用于3x热熔胶不干胶标签（正面/背面/安全 标签）。制造商 Gernep 于 2021 年对贴标机进行了大修，包括符合 CE 标准的新电气设备。贴标机配备 DTO80 型玻璃。 贴标机在大修后运行了大约 200 小时
标记机 GERNEP Labetta 7500 bph 首任所有者生产的全自动冷胶玻璃瓶和玻璃瓶标签机 由德国Gernep于2013年制造，作为标签员仅有9512小时的 操作时间。该标签机拥有三本冷胶标签杂志，用于预 纸标签（颈部、正面和背面，现保存于仓库及部分 送范围）。它涵盖了所有传统玻璃和PET容器的设备需 求。结合了多种成熟技术，如不锈钢胶滚筒、橡胶化 可调节胶水调色盘、带有节胶细微调节胶水厚度的 隔刮刀、用于精确定位标签的覆盖齿轮箱。Labeller维 良好，最近一次全面大修（19,500欧元）是在2019年底 成的。所有气动胶泵均改为电动驱动泵，且采用不 钢底架取代标准碳钢框架。 技术特征 制造商：GERNEP GmbH 制造商型号：Labetta 4/3/10 640A 容量：7500 bph 制造年份 ...
二手标签员Gernep Labetta 5-640 sk： 年份：2009年 状况：良好 二手标签机GERNEP 年份：2009年 Modello：LABETTA 5-640 SK 速度：4000 每小时 方向：顺时针 五个正面 编号2 Stazioni Adesiva per： 正面标签（也适合包裹式标签） 盖章 电子凸轮 Regolazione testata： elettronicamente 可行的格式： 最小直径40毫米，最大100毫米 最低高度40毫米，最大300毫米 安全防护 代码：EA 504 更多详情请见：https://bottlingscout.com
Overview This Labeling Machine was built in 2005 by Gernep. It was in operation in a fruit juice plant in Germany till 01/2022. In this company it was only used in single-shift operation for about 100 days a year, which is why the condition of the machine is still very good. Tech Specs: Capacity: 6,000 bph at 1L bottles Number of aggregates: 2 Accessories: Formats for 1.0 l VdF glass bottles, 0.7 l VdF, 0.2 l glass bottles goiter neck Various spare parts included
Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data Capacity: approx. 5,000 bottles/hour Speed range: approx. 1,000 – 5,500 bottles/hour Formats: 0.75 L Bordeaux (H=309 mm, Ø74 mm) 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) 1.0 L Schlegel (H=309 mm, Ø89 mm) 0.75 L Burgunder (H=297 mm, Ø82 mm) Application: Labelling of glass bottles (wine) Configuration: Rotary machine with 2 cold glue labelling aggregates Label positions: Body (front), neck ring, back Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of De ...
