子类目
(三级类目)
生产厂家:
(品类: 706)
发酵罐安装在脚上，无绝缘，底部为平锥形，侧壁和 形冷却区，中央出口和下水孔。附加标题：可冷却 ，容量：21797升，宽度：2.95米，高度：4.1米，重量： 2000公斤，材料：不锈钢，无绝缘，位置：垂直，特点 ：平锥形底部，侧壁和锥形冷却区，中央出口，人孔 DN50
采用4辊磨粉机进行麦芽磨粉，附加名称：带调质和麦 芽运输功能的4辊磨机，产能：4吨/小时，操作/控制： 西门子Simatic S7-300，特点：3个小型筒仓卸料;4个大型筒仓卸货;麦芽 运输;鼓风机;麦芽秤;麦芽调理;麦芽磨，四辊;控制柜 控制系
Pentair BMF-Skid (with 18 modules) for beer filtration. Ideal for expanding existing systems or setting up a new filtration system. The capacity of a single skid at the start of filtration is 80 - 120 hl/h, depending on the filterability of the beer. The skids are also available for sale individually., Additional title: Beer Membrane Filtration (BMF), Max. capacity: 480 hl/h filtered beer, at start of filtration (depending on beer quality); 80-120 hl/h per skid, Flow rate: 330 m3/h un-filtrate pump per skid, Flow pressure: 1 bar un-filtrate pump, Number of modules: 72 pieces total 18 pcs. per Skid, Length: approx. 5500 mm, Width: approx. 1500 mm, Operation / Control: ProfiBus connection to a central PLC, Base construction: Module frame-mounted, Features: 4 x BMF Skid, with 18 membrane modules each; one un-filtrate pump per skid
室式巴氏杀菌器用于延长瓶装饮料的保质期。蒸汽由 部供应，并送入巴氏杀菌室进行加热。附加标题： 一个托盘舱，长度：1.7米，宽度：1.7米，高：2.7米， 重量：2吨，材料：不锈
带冷却套的立式不锈钢压力罐，附加标题：立式不锈 罐，容量约4100升，工作压力：3巴，工作温度：50摄 度，长度：1.55米，宽度：1.55米，高度：3.40米，重 ：900公斤，材料：不锈钢，位置：垂直，底座结构： 4 x 可调高度脚，特点：冷却夹套;电阻温度计（E+H）;雷 电平测量（E+H）;安全阀;真空阀;侧墙的人形;采样
附加标题：含碳化，容器容积：500升，容器操作压力 1至-0.15巴，容器工作温度：130摄氏度，功能：流量 （E+H）、带搅拌装置的混合容器（5升）、带按钮的 制面板、碳化及后续的冷却部分、无压力罐、无面
罐式拖车——半挂车，配备明亮啤酒罐用于啤酒运输; 该拖车的制造年份为2012年。附加标题：移动拖车上的 水平不锈钢压力罐，容量：25250升，工作压力：3巴， 统容量：25250升，材料：不锈钢，位置：横放于半挂 车
The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water or dealcoholised beer)., Additional title: dialysis, Capacity: 350 l/h remaining alcohol content: approx. 0,45 %; original alcohol content: approx. 5 %, Length: 3,6 m, Width: 1,7 m, Height: ca. 8,4 m, Weight: 900 kg, Operation / Control: Control cabinet with operating buttons and touch display, Features: 6 membrane modules, column DN400; plate heat exchanger TS6-MFG, Alfa Laval, year of manufacture 2006
Cylindroconical fermentation and storage tank - Ammonia or glycol cooled, 1 x cone cooling, 3 x frame cooling. - Swivelling cone - Stainless steel - insulated - Standing frame, short - Cleaning air fitting with safety valve - Vacuum valve, Additional title: Refrigerated stainless steel pressure tank for outdoor installation, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination with safety valve; vacuum valve; temperature measurement
Universal compact dust extraction system with compressed air cleaning. The sound-insulated hood ensures quiet operation whilst protecting the suction unit from contamination. Motor housing with integrated tank or shaft cleaning unit, direct-drive fan with three-phase motor, aluminium turbine impeller, pressure gauge with pressure reducer and quick-connect nipple for connecting the compressed air supply. Control box with motor protection switch or automatic control for fully automatic compressed air cleaning during operation. Filter housing made of galvanised, powder-coated sheet steel with replaceable filter cartridges and built-in pre-separator including baffle plate. A bucket frame with a release mechanism is provided for waste disposal., Additional title: for kieselguhr dust, Capacity: 1800000 l/h, Filtration area: 15 m2, Power: 3 kW, Current: 6,3 A, Voltage: 400 V, Frequency: 50 Hz, ...
Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - insulated - Stand frame, short -Cleaning air fitting with vacuum valve and safety valve, Additional title: Insulated stainless steel pressure tank for outdoor installation with a cooling , Capacity: 43100 l, Operating pressure: 4 bar, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x side wall cooling jacket; swivel opening with outlet; sampling valve; insulation; dearation and cleaning combination with 2 safety valves; temperature measurement; volume measuerment
Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water., Additional title: coolable stainless steel pressure tanks, Volume per tank: 32400 l, Cooling surface/tank: 25 m², Perm. working overpressure: 3 bar, Systemic volume: 324 hl, Length: 2,5 m, Width: 2,5 m, Height: 7,4 m, Weight: 2585 kg, Material: stainless steel AISI 304, Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve , Periphery: Inlet and outlet pipework via double-seat valves
Water treatment system consisting of: cation exchanger, reverse osmosis system, and pressure booster station, Additional title: Reverse osmosis system with cation exchanger and pressure booster station, Permeate capacity: 1100 l/h, Max. permissible pressure: 6 bar, Yield: 75 %, Salt retention: 98 %, Power: HD-pump 1,5 kW, 3,15 A, Frequency: 50 Hz, Length: approx. 2294 mm, Width: approx. 740 mm, Height: approx. 1220 mm, Weight: 200 kg, Features: Conductivity meter, fine filter, overpressure protection, high pressure pump, control unit, pressure booster station 2 salt dissolving and storage containers, 2 filter containers with nozzle rod and lower nozzle, central control valve with upper nozzle, control unit
6 horizontal stainless steel tanks with dished bottoms, side cooling zone, manhole, sampling tap and central outlet. The purchase of a partial quantity is possible., Additional title: stainless steel tanks with temperature control, Total capacity: 242900 l, Max. pressure 4 Tanks: 0,9 bar, Max. pressure 2 Tanks: 5 bar, Material: stainless steel, Position: vertical, Base construction: cylindrical tank with dished bottoms, placed on 4 square tube feet, Features: 4 storage tanks (approx. 445 hl), 2 pressure tanks (approx. 320 hl), shell manhole, 1 shell cooling zone, insulated with steel metal cladding , Periphery: own temperature control
- Vertical fermentation tank with a capacity of 152.60 hl. Insulated, clad and equipped with overflow spout, jacket cooling zone and sampling tap. - Vertical fermentation tank with a capacity of 161.27 hl. Equipped with overflow spout, jacket cooling zone, yeast plug, spray head and lighting fixture. - Horizontal pressure tank with a capacity of 155.00 hl and a pressure capacity of 4.4 bar. Insulated and equipped with cooling zone, thermometer, safety valve, pressure gauge, sampling tap, hose level indicator and 2 spray heads. - Mobile yeast tank with a capacity of 8.00 hl and jacket cooling. - Temperature control., Additional title: stainless steel tanks for wheat beer fermentation, Total capacity (gross): 46500 l, Features: 2 vertical tanks (1 x ca. 150 hl, 1 x ca. 160 hl), 1 horizontal tank (155 hl), 1 mobile yeast tube, own temperature control
单级均质剂，用于颗粒粒径为1微米的啤酒花悬浮液。 通过信号交换可以集成到更高级别的控制系统中。电 通过外部FI控制，附加标题：高压均质，容量范围约 ：1800升/小时，压力：250巴，细胞颗粒大小：1微米细 颗粒，长度：约2.2米，宽度：约2.5米，高度：约1.9 ，运行/控制：集成于ProLeit工艺控制系统中，电机由 部变频器控制。 功能：支持CIP，可SIP支持
Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually, Additional title: with switch cabinet and CIP tank, Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system
This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays
This beer drive delivery station is designed for efficient liquid transfer in breweries and beverage factories. The device is mounted on a frame with integrated forklift pockets to ensure easy mobility and handling. It features a pump, an inductive flow meter, a control cabinet with a totalizer and two toggle switches, and a 20 m long DN40 hose (hose replacement recommended) with a hose reel. Other features include a pneumatically controlled flap valve, a compressed air connection, and three manual flap valve connections, making it a versatile and practical solution for controlled beverage dispensing. Our team at VBW Asset Trade will be happy to answer your questions., Hose: 20 m DN40, Length: 2,2 m, Width: 1,2 m, Height: 1,62 m, Base construction: mounted on rack with forklift shoes integrated, Features: pump, inductive flow meter, control cabinet with summation counter and two flip sw ...
The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank., Additional title: membrane filtration plant for yeast-beer recovery 1987-1991, Capacity: 7 hl/h, Tol. operating pressure: 10 bar, Tol. operating temperature: 85 °C, Max. filter area: 26 m^2, Current: 4,85/2,8 A, Voltage: 220/380 V, Frequency: 50 Hz, Operation / Control: Simatic S5, Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology
This PARAMIX system is used to produce high- and low-carbonated beverages. The process comprises the following steps: 1. Degassing of the water, 2. Dosing and mixing of water and syrup, 3. Carbonation of the finished mixture. The system was retrofitted by FAMIX in 2009 and expanded to include the following components: - CO₂ impregnation unit - CO₂ pressure-temperature ratio regulator type BMS7 The regulator, including the control cabinet, is to be completely renewed again when the device is purchased. The system is ideal for the reliable and flexible production of a wide variety of soft drinks. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: mixing unit 1983 - 2010, Capacity approx.: 15000 l/h Mixing and carbonating, Length: 2,9 m, Width: 2,5 m, Height: 2,5 m, Weight: 3000 kg, Operation / Control: mi ...
This flash pasteurization system is used to stabilize beverage quality through gentle pasteurization. The product is heated to pasteurization temperature via a plate heat exchanger for a defined period of time and then cooled in a controlled manner. The system consists of: - Tube heat exchanger with hot water buffer tank for supplying hot water -Plate heat exchanger for flash pasteurization of the product This combination ensures reliable, uniform heating to guarantee long-term product quality. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: In-line pasteurisation plant for beer, built between 1987 and 1999, Capacity: 35000 l/h, Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement, Features: 1 x plate heat exchanger, 1 x tube heat exchanger, 1 x hot water pu ...
湿式废谷物输送机 - 带矩形进水槽的外壳 - 安装在入口处的湿式乏谷物仓 - 冲洗水排放连接 - 安装齿轮电机 - 带空气连接的不回流挡板、压力表和球形检修舱口， 加标题：湿式乏谷物输送机，容量约200公斤/分钟， 率：4千瓦，电流：6.98安培，电压：400伏，频率： 50 Hz，材料：不锈钢1.4301，特点：废谷仓; 带压缩空气连接的回流阀、压力计和球形检修舱
浮力舱。- 设计用于氨冷却（也可用乙二醇冷却），1 x 框架冷却。- 不锈钢 - 绝缘并包覆 - 支架框架，短 - 带安全阀的清洁空气接头，附加标题：室外安装用冷 不锈钢罐，容量：74480升，工作压力：0.9巴，宽度： 12.55米，高度：3.27米，材料：不锈钢，位置：垂直， 座结构：短支撑裙板，特点：冷却：1个侧壁冷却套 ;保温层;带安全阀的债务与清洁组合;温度测
双组分喷嘴，配备视窗，麦汁冷却能力约为130 hl/h，完全组装在不锈钢面板上，附加标题：双流体麦 汁喷嘴用于麦汁氧合，麦汁冷却能力为13000 l/h，底部结构：安装在不锈钢面板上，特点：DN50空气 排气口、无菌空气过滤器、空气流量计、减压器， 膜阀，控制
Manual operating biological lactic acid plant with 3 tanks in stainless steel as storage and dosing tanks, with all fittings, Additional title: 3-tank system with heating elements, aeration devices and temperature control, Volume and dimension per tank: 2000 l Diameter 1300 mm, cylindrical height 1500 mm, total height 2100 mm, Length: 4500 mm, Width: 1700 mm, Height: 2100 mm, Operation / Control: electrical box with buttons, switches and temperature controls, Material: stainless steel, Position: free standing, Base construction: standing tanks with lids, on pipe feet, Features: electric heating rods, temperature sensor, stand hose for content display, automatic gassing, ladder bracket, internal piping, control box
用于检查啤酒箱完整性的控制单元。还检查瓶盖，包 在出现问题时设置输送机停止。附加标题：带瓶盖 测，电流：4安培，电压：230伏，频率：50/60赫兹，压 缩空气：最小6巴，最大10巴，长度：0.7米，宽度：0.74 米，高度：2.1米，运行方向：横向，功能：检查而非 闭检测，集成输送机停止装
用于酿酒厂的外部麦汁锅炉，130升敲出能力;附加标题 ：管壳和壳体换热器，压力壳/管：2巴，Volumke壳体/管 ：200升，材料：不锈钢1.4541（AISI 321），基底结构：带补偿器和支撑的垂直管壳热交换 ，特点：蒸汽和冷凝液接头;安全
完整真空蒸发系统类型SchoKo，配备：-膨胀蒸发器/真 罐-蒸汽冷凝器-不同泵和配件，附加名称：真空蒸发 统，敲出容量：13000升，真空罐容积：1471升，长度 2006毫米，宽度：2006毫米，高度：2503毫
