磨床 二手 出售 (2,199)

spindle taper: MK 3 total power requirement: 4 kWweight of the machine ca.: 0,620 tCenter bore grinding machine- 160 x 1000 LO- small/ large drilling/grinding length: 50/ 1000 mm- Spindle holder: MK 3- small/ large workpiece diameter: 6/ 160 mm- Grinding head in spindle hole: 125 mm- Oscillation size: 0 to 5 mm- Oscillation double strokes: 125 / min- Speeds: 55/ 110 rpm- Connected load: 4 kW- Weight: 620 kgspecification: motor. Material rotation oscillation Switch cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

磨削长度： 600 mm磨削宽度： 320 mm工件高度： 525 mm表面积： 600 x 300 mm磁板： 600 x 300 mm机器重量 CA.： 2 T机器尺寸 CA.： 2600 x 1500 x 2000 m总功率要求： kWT本广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案�

规格： - 砂带尺寸约为 2000 x 150 毫米 - 表面磨削开口约 560 x 150 毫米 - 砂带速度约 30 米/秒 - 接触垫圈 B 150 / D 200 mm - 驱动皮带轮 B 150 / D 200 mm - 驱动 400 V / 3 kW - 工作高度可调 -莫特。除尘 - 空间要求 宽 750 x 高 1050 x 深 1500 毫米 - 重量约 120 千克

width of the strips: 75 mmband length: 2000 mmband speed: 30 m/stotal power requirement: 3,0 kWweight of the machine ca.: 70 kgdimensions of the machine ca.: 610 x 944 x 1419 mmMobile belt sander PASOVEC 75 RUNNERPasovec 75 RUNNER - the special belt grinder developed forSurface grinding applications, especially for grinding weld seams in thematerial surface. Pasovec 75 Runner removes unwanted layers that occur whenSheet metal rolling or after sheet metal cutting with plasma oroxygen arise.Innovative, multifunctional machineStepless adjustment of the grinding depthEquipped with a dead mans switchStation for flat grinding small workpiecesLow running costsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 2 - 40 mmgrinding depth: 70 mmswing diameter: 285 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: mMachine in good working condition, with new e-motor for the working spindle drive.Machine video:https://youtu.be/N95AzX9D_QYMax. Distance chuck flange - wheelhead 390 mmAccessories:Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kWGrinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kWMagazineMachine documentation.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 330 mmgear width: - mmmax. module: 7 min. module: 0,5 Control: Siemens 840 C total power requirement: 72 kVAweight of the machine ca.: 11,7 tdimensions of the machine ca.: mWe offer a Pfauter model G 320 gear grinding machine for salenumerical control on 8 axes for the machining of gears with straightand helical toothing, with rolled profile for enveloping cuts, the oneWorm profile disc used.Technical specifications:CNC control Siemens 840 CControlled axes:X Radial axisY Tangential ShiftZ Vertical axisA Workhead rotationB Worm rotation during processingC Table rotationU Radial axis dresserV Tangential axis dresserModule 0.5 – 7.0Minimum workpiece diameter 10 mmMaximum workpiece diameter 330 mmNumber of teeth 10 - 600Vertical carriage thrust Z 200 mmHorizontal grinding wheel - carriage stroke X 230 mmTangential slide stroke Y 135 mmAngle of rotation of clamping hea ...

grinding length: 4200 mmgrinding width: 1300 mmworkpiece height: 550 mmControl: SIEMENS 840 D magnetic clamping plate: 4200 x 1300 mmsegment head diameter: 1400 mmgrinding motor turning speeds up to: 320 U/min.grinding motor: 306 kWweight of the machine ca.: 50,0 tdimensions of the machine ca.: mSegment dimensions: 120/106 x 41 x 250 mmNumber of segments: 1 set = 26 piecesGrinding motor feed: 0.5 - 35 m/min, infinitely variableGrinding motor feed:- in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variableEquipment: CNC-control SIEMENS Sinumerik 840 D Automatic hydr. swivelling of the grinding motor from hollow to cross grinding NC-controlled adjustment of the Marposs measuring head by means of precision support.- new grinding dimensions can be entered into the control, whereby thethe grinding head automatically adjusts to the corresponding height. Dresser with adjustment ax ...

max. wheel diameter: 330 mmgear width: 180 mmmax. module: 7 min. module: 0,5 total power requirement: 12 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 215 mmgear width: 40,65 mmmax. module: total power requirement: 20 kWweight of the machine ca.: 10 tMax. external Ø of workpiece 215 mmTooth profile, height x width 16 x 40.65 mmNo. of teeth 5 - 200Max. tooth ratio 1 : 10Grinding wheel Ø 51 - 190 mmGrinding wheel speeds 1,000 - 6,000 rpmX Axis (horizontal) 152 mmY Axis (vertical) 178 mmZ Axis (slide base plate) 304 mmDistance from middle of machine to middle of workspindle 115 mmAxial speed 125 mm/secWorkpiece speeds 0 - 30 rpmWorkspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 HzWeight, approx. 10,000 kgAccessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driven gri ...

砂轮最大直径： 800 mm砂轮最大宽度： 250 mm磨台： 可摆动： 分级总功率要求： kW机器重量 ca.： t机器尺寸 ca.： m双面精磨机，修整器，冷却液装置，旧款 M.

最大研磨直径：30 mm导轮宽度：12 mm砂轮最大宽度：mm总功率要求：kW机器重量 CA.：T机器尺寸 CA：M

honing diameter: 12 mmstroke: 40 mmthroat: mmtotal power requirement: 15 kWweight of the machine ca.: 5 tdimensions of the machine ca.: m3 spindle honing machine with in process measuringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 240 mmcentre distance: 0 mmhoning length max.: 500 mmmax. module: 5 total power requirement: 12 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 120 mmgrinding depth: 200 mmswing diameter: mmtotal power requirement: 4 kWweight of the machine ca.: tdimensions of the machine ca.: mGrinding diameter, internal, max., approx. 3 - 120 mmGrinding depth, approx. 200 mmHeight of centres above rotating workpiece slide 132 mmMax. swing Ø in front of rotating workpiece slide, approx. 450 mmWork spindle admission 40 mmTable stroke, max. (Z axis) 480 mmWorkpiece cross adjustment (X axis) 50 mmTurret head cross adjustment (U axis) 50 mmWorkspindle head swivelling (B axis) -30 / +45 ° (manual)Speeds of workspindle, infinitely variable 75 - 1,300 rpmGrinding spindle speeds 9,500 - 150,000 rpmGrinding spindle drive 4 kWTotal electrical load, approx. 8 kW - 380 V - 50 HzWeight, approx. 3,000 kgAccessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with the usual pr ...

max. wheel diameter: 280 mmgear width: 330 mmmax. module: 5 min. module: 1 Control: LIEBHERR CNC total power requirement: 28 kWweight of the machine ca.: 12 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 80 mmstroke: 280 mmthroat: 300 mmtotal power requirement: 6 kWweight of the machine ca.: 2,6 tHoning Ø 10 - 100 mmMax. honing depth, approx. 250 mmMax. spindle stroke 260 mmDistance between spindle and column 300 mmMounting height 1,000 mmTable size 350 x 500 mmHeight of table above floor 500 mmSpindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpmStroke speed, infinitely variable, hydraulic 0 - 23 m/minSpindle drive 2 kWTotal electrical load 6 kW - 380 V - 50 HzWeight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be inspected under ...

max. wheel diameter: 0 mmgear width: 120 mmmax. module: 3 min. module: 1 total power requirement: 20 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: m: : : : : : 5 machines in stock,YOM: between 1986 and 1990Gear Æ, min./max. 55 / 120 mmGear Æ for shaft-formed parts 80 mmModule (pitch 25.4 - 8.5) 1 - 3 No. of teeth, min./max. 13 / 80 Pressure angle 14 - 30 °Helix angle, max. 40 °Workpiece clamping length 145 - 420 mmGrinding worm Æ 300 - 400 mmGrinding worm width 25 - 40 mmGrinding worm speeds, infinitely variable (35 m/s) 1,650 rpmFeed range  ...

workpiece diameter: 460 mmthreading length: 900 mmthread pitch: 100 mmtotal power requirement: 10 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1600 mmgrinding width: 600 mmworkpiece height: 500 mmtotal power requirement: 50 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter max.: 100 mmregulating wheel width: 200 mmmax. width of grinding wheel: 200 mmgrinding diameter: 100 mmgrinding length: 250 mmfeed in: mmworking area: mmspeed: m/minBar length: mmtotal power requirement: 25 kWweight of the machine ca.: 4.500 tdimensions of the machine ca.: mK O E N I G & B A U E R (Germany)Centreless Grinder with Plunge-in Grinding DeviceModel Multimat 150 - 5Year approx. 1978 S/Nr. 73 918 _______________________________________________________Grinding Ø regular/maximal 2 – 50/100 mmMax. length of workpiece for Thru-Feed-grinding 250 mmMax. length of workpiece for plunge-cut grinding 200 mmGrinding wheel size, Ø x width 600 x 200 mmRegulating wheel size, Ø x width 300 x 200 mmGr ...

连接负载频率：230 V重量：4,7 kg范围长-宽-高：620 x 240 x 180 毫米输出：0,8 KW研磨带尺寸：40 x 760 毫米最大管径：180 毫米带速：2,4 - 9,1 米/秒管材研磨/精加工�

砂轮最大直径：200 mm砂轮宽度：32 mm锥度直径：30 mm连接负载频率：230 V发动机输出：0.9 KW重量：28 kg尺寸：0.56 x 0.32 x 0.30 m

table diameter: mmworkpiece height: mmnumber of wheels: 2 total power requirement: 11 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: mmworkpiece height: mmnumber of wheels: 2 total power requirement: 8 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

砂轮直径：250 毫米连接负载频率：230 V车削速度：90 U/min总功率要求：0.2 kW机器重量约：18 公斤尺寸：470 x 300 x 440 米磨刀机砂轮 250 x 50 x 12 毫米，粒度 220皮革盘 200 x 30 x 12 毫�

最大磨削直径： - mm磨削长度： - mm工件长度： - mm控制： 总功率要求： - kW机器重量 ca.： - t机器尺寸 ca.： - m

x-travel: 400 mmy-travel: 250 mmworkpiece height: mmControl: CNC 314 ELESTA total power requirement: 15 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mH A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding MachineModel S 3 – CNC 314 Year approx.. 1990 S/N 32086 ____________________________________________________________Table size, approx. 600 x 380 mmMax. load on table, approx. 300 kgTable travel, longitudinal, max. (X Axis) 400 mmTable travel, cross, max. (Y Axis) 250 mmVertical adjustment of grinding head max. (W Axis) 450 mmStroke of grinding spindle, max. (Z Axis) 120 mmTable Longitudinal and cross feeds  ...

研磨范围： 2 - 13 毫米锐角 最小/最大： 90 - 140 升降位连接负载： 230 伏机器重量约： 10 公斤机器尺寸约： 0.35 x 0.2 x 0.2 �

workpiece diameter: 320 mmthreading length: 570 mmthread pitch: 315 mmtotal power requirement: 17 kWweight of the machine ca.: 12 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mmgrinding width: 500 mmworkpiece height: 425 mmtotal power requirement: 15 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.