其他磨床 (45)

齿轮磨床HURTH SRS 400

Auction-ID: A1-45170-97

带换挡的螺纹磨床WMW 5822M�

Auction-ID: A1-45170-93

带皮带磨削附件的轴磨机 规格： - 柔性轴 1500 mm - 5种速度 - 皮带研磨附件 - 驱动 380 V - 移动底架 - 大约需要空间 宽 600 x 高 1400 x 深 600 mm - 约重 80 公斤

Technical data Manufacturer: JUNG Model No.: JF 520E-1 Machine Type: Surface Grinding Machine Grinding length: 600 mm Grinding width: 200 mm Table size: 600 x 200 mm Distance from spindle table: 500 mm Grinding wheel: 250 x 25 x 51 mm Max. circumferential speed: 35 m/s Longitudinal feed: 1 – 24 m/min Transverse feed: 0.1 – 8.0 mm Spindle speed: 800 – 4200 rpm Spindle power: up to 5 kW Voltage: 380 V Frequency: 50 Hz Weight: approx. 1500 kg Configuration Hydraulic table feed Automatic transverse feed Fine-tuning Central lubrication Electromagnetic clamping plate (24 V prepared) Various grinding spindle designs Auction-ID: A1-46315-10

Auction-ID: A1-45170-81

Manufacturing number: 75-8771Max. grinding wheel diameter: approx. 250 mmMax. sanding belt width: approx. 40 mm Auction-ID: A7-46287-11

Grinding wheel diameter: approx. 60 mm Auction-ID: A7-46287-94

incl. high-frequency sander from the manufacturer COOPER, type: BL-2B, year of manufacture: 2006 Auction-ID: A7-46287-135

Rösler Vibratory Grinding Machine incl. Belt Dryer Small, Vibrator Dimensions: Drying plant: H:900 W:900 L:1100 Vibrator: H:1500 B:1800 L:1800 Mounter: H:1700 W:1300 L:2100 Auction-ID: A7-46048-116

Table load incl. magnetic clamping plate 600 kg, table speed 2-28 m/min, max. grinding range 600x450 mm, incl. cooling unit Auction-ID: A1-46045-112

Rösler mass finishing machine incl. belt dryer, vibrator Dimensions: Drying plant: H:1900 W:1800 L:3000 Vibrator: H:1500 B:1800 L:1800 Mounter: H:1700 W:1300 L:2100 Auction-ID: A7-46048-110

Auction-ID: A1-46045-118

TOOL/CUTTER GRINDING MACHINE Inv. No. 12.993I1 Make PEETERS Model AP Distance between centers 500 mm Height of centers 120 mm Table movement 400 mm 4 spindle speeds 2900 – 5800 RPM Table length 840 mm Table width 140 mm Weigth 890 kg Auction-ID: A1-45737-125

TOOL/DRILL GRINDING MACHINE Inv. No. 13.031IM Make FARMAN Model FC 50N Mach.no. 6048 X axis (Left / Right) stroke 240 mm Y axis (Front / Back) stroke 180 mm Z axis (Up / Down) 110 mm Swiveling Shaft (angle) 0 - 20° Drill Size ø2 - ø51 mm Point Angle 40° - 180° Clearance Angle 0° - 18° HP 0.5 Volts 380 Cycles 50 Auction-ID: A1-45737-130

Auction-ID: A1-45737-144

Auction-ID: A7-45983-77

max tube length: 2500 mm; max diameter: 60 mm; Double-sided pipe deburring Auction-ID: A1-45793-37

Grinding length max. 70 mm, clamping diameter max. in the hood 165 mm, headstock bore 28 mm, speed of the headstock spindle 500-750-1000 rpm Auction-ID: A7-45768-40

Drill Bit Grinding Machine: Additional station for grinding back the drill cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Tungsten carbides with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running due to high weight and rubber feet. Sharpening angle adjustable for all common twist drills. Packaging Dimensions: 430 x 240 x 240mm. Weight 16Kg. Grinding range 8 - 32 mm Sharpening angle min./max. 90 - 140 degrees Connection voltage 230 V Condition: never used / new (5) Auction-ID: A7-45761-841

Auction-ID: A7-45768-15

Drill Bit Grinding Machine Grinding range 2 - 20 mm Acute angle min./max. 90 - 135 degrees Connected load 230 V Machine weight approx. 8.6 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A7-45761-853

Flexible shaft Speed max 2900rpm Connection SP 400Volt Power 0.8KW see pictures Condition: unchecked (6) Auction-ID: A7-45761-778

Auction-ID: A7-45768-115

This grinder is ideal for regrinding tools such as face mills, drills, TIG welding needles and much more. comes standard with: Accessories for lathe tools Accessories for drills Accessories for milling 5C Spring Collet (4-6-8-10-12 mm) Clutch wrench 38-42 Grinding wheel wrench Allen key M3-M8 Screwdriver Diamond grinding wheel Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond Pen Spring Collet: 3/16\" - 5/16\" - 3/8\" - 1/2\" Grinding range 3 -28 mm Angle adjustable from - to horizontal 0-180 degrees Angle adjustable from - to vertical 0-45 degrees Angle adjustable from - to negative 0-52 degrees Clamping range 3 - 28mm mm Speed 5200 rpm Connected load 230 / 250 volts / watt Disc diameter 100 x 50 x 20 mm Machine weight approx. 45 kg Dimensions L x W x H 0.5 x 0.4 x 0.4 m Condition: never used / new (5) Auction-ID: A7-45761-834

Satin finishing machine with accessories. See pictures Connection voltage 230 V Power 1.2 KW Mounting diameter 19mm mm Speed 1000 - 3000 rpm Roller width max. 100 mm Roller length max. 120 mm Weight 2.8 kg Condition: never used / new (5) Auction-ID: A7-45761-886

ELB SW3T Flat Grinding Machine Type: Flat grinding machine Manufacturer: ELB Model: SW3T X-axis travel: 600 mm Y-axis travel: 200 mm Z-axis travel: 350 mm Approx. machine weight: 1500 kg Approx. dimensions (L x W x H): 1150 x 1150 x 1800 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-28

Tube grinding/satin finishing machine - For sanding, satin finishing, and high-gloss polishing - Large wrapping angle of 270° for efficient work - Belt speed infinitely adjustable - Flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimension 40 x 760mm For pipe diameters up to 180mm Condition: never used / new (5) Auction-ID: A1-45681-874

Grinding range 2 - 13 mm Sharpening angle min./max. 90 - 140 degrees Connected load 230 V Machine weight approx. 10 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A1-45681-850

Belt width 150 mm Strap length 1220 mm Grinding wheel dimension 225 mm Work table: 150 x 400 mm Table adjustable up to 90 degrees Table surface 150 x 130 mm Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 35 kg Space requirement approx. 650 x 360 x 400 mm Condition: never used / new (5) Auction-ID: A1-45681-887

Belt width 100 mm Strap length 915 mm Grinding wheel dimensions 100 x 915 mm Work table: 225 x 155 mm Total power requirement 0.44 kW Machine weight approx. 0.018 t Space requirement approx. 0.56 x 0.26 x 0.3 m Condition: never used / new (5) Auction-ID: A1-45681-852

ELB SW3HA Flat Grinding Machine Type: Flat grinding machine Manufacturer: ELB Model: SW3HA X-axis travel: 600 mm Y-axis travel: 200 mm Z-axis travel: 350 mm Approx. dimensions (L x W x H): 1150 x 1150 x 1800 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-26

Stone and belt grinding machine Motor power 900 watts. Speed 2950 rpm. Dimensions whetstone 200 x 32 x 30mm. Dimensions sanding belt 100 x 915 mm. Package sizes 62 x 54 x 30 cm. Weight 35 kg. Condition: never used / new (5) Auction-ID: A1-45681-774

Belt and disc grinding machine Belt width 25 mm Strap length 762 mm Grinding wheel dimension 125 mm Table adjustable up to 45 degrees Table surface 130 x 130 mm Connection voltage 230 V Total power requirement 0.3 kW Condition: never used / new (5) Auction-ID: A1-45681-859

Auction-ID: A7-46309-32

Rösler mass finishing machine incl. belt dryer, vibrator & placement system Auction-ID: A7-46048-95

Frequency 60 Hz, dimensions continuous grinding machine 2500x1450x2700 mm, dimensions control cabinet 1650x650x2100 mm Auction-ID: A1-46045-257

控制  CNC 控制西门子 840 D SL 微精加工机型 Microstar 284 垂直设计，配备8个工件夹持和4个微精加工单元，用� �滑轨和反环磨削。- 6500 豪尔斯工件主轴：8个部件，最大转速2000转/分钟，精� ��工单元数量，最大4件。转速10,000转/分钟，最大工件 长度160毫米，载荷高度1200毫�

CONTROLS  CNC controls SIEMENS 840 D SL ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 5200 kgMicrofinishing machine type Microstar 284 in vertical design with 8 workpiece holders and 4 microfinishing units for machining slide and counter ring grinding.-11000 houersWorkpiece spindles: 8 piecesSpeed max 2000 rpmNumber of finishing units 4 piecesmax. speed 10000 rpmmax workpiece length 160 mmLoading height 1200 mm

控制  电子控制 电气规格  市电电压：400 V  市电频率：50 Hz

尺寸：410 x 410 x 860 m，适用于带电气柜的穆勒摆臂磨床底座单元。内部有 电机保护开关、保险丝、16A插座等。电气部件见照片2 。应买家要求，磨豆机未附带底座。底座尺寸为300 x 300毫米。经过改装，基础单元可用于任何类似大小的� ��器。该广告的数据是用ModulMWS——LogoTech oHG的软件解决方案——创建的�

Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system., Weight approx: 1700 kg, Dimensions W x D x H: 1900 x 1200 x 2400 mm, Cutting disc diameter: Max. 200 mm, Drive power grinding motor: 4,0 kW, Workpiece length without loader magazines: 3 - 450 mm, Workpiece diameter without loading magazine: 3 - 32 mm, Workpiece length with loader magazine: 1-310 mm, Workpiece diameter with loading magazine: from 3 - 20 mm

通用工具和切削磨床 TACCHELLA 4 AM - 通用装置， 工作台的液压运动， 有关技术数据的信息不具约束力， 机器可用时需提前出售， 纵向行程 x 轴： 400 mm， 横向行程 y 轴： 250 mm， 工作台与主轴轴之间的间隙： 375 mm， 砂轮转速： 3000/6000 rpm， 砂轮尺寸： 200x20 mm， 主轴电机功率：1,5 Kw，重量：1150 Kg，附件：冷却系统，电动分配装�