子类目
(三级类目)
生产厂家:
(品类: 104)
width of the strips: 75.0 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 67.0 kgrange L-W-H: 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt ...
width of the strips: 150 mmband length: 2000 mmband speed: 34,0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 4.0 kWweight of the machine ca.: 115 kgFurnishing :- integrated suction- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful motor 4.0 kW- suction nozzle including: integrated suction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75.0 mmband length: 2000 mmband speed: 30.0 m/secgrinding width: 75 x 430 mmengine output: 3.0 kWweight: 75.0 kg including machine baseFurnishing:- Powerful belt sander- modularly expandable, for the trade and for small series.- Can be expanded with additional modules- Speeds ideal for metalworking with 3000 / min- Height-adjustable surface grinding table for linear surface grinding- Removable chip catcher- Connection option for external suction- Working height individually adjustable- Patented strap tensioning system- Robust three-phase motor- Low vibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 400 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 220 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 200 mmband length: 1490 mmband speed: 8.0 m/secmotor: 400 Voltloading area: 500 x 280 mmtotal power requirement: 1.5 kWDimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2280 mmrevolutions per minute: 2880 U/minroll diameter: 140 / 80 mmtable-size: 700 x 350 mmengine output: 3.0 kWweight: 250 kgrange L-W-H: 1300 x 800 x 1500 mm- Machinevideo -https://www.youtube.com/watch?v=l-XFPai2BAAFurnishing :- Horizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized belt oscillation approx. 10 mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment included:- swiveling grinding unit 90 - 135 degrees- Support table on the pulleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 300 mmband length: 2070 mmband speed: 7.0 m/secsurface of working table: 750 x 380 mmdiameter: 87.7 Führungsrollen mmengine output: 1.5 kWtotal power requirement: 400 Voltweight of the machine ca.: 88.0 kg.range L-W-H: 1050 x 600 x 400 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 使用：内圆磨床 • 制造商：OVERBECK、Herborn • 型号：250 I-HA • 工厂编号：261991 • 建造年份：1971 • 夹紧直径：最大 140 毫米 • 可磨孔长度：最大约 150 毫米 • 可磨孔径：最大约 0.8-80 毫米 附件：不带内圆磨削主轴 不带用于内圆磨削主轴的驱动电机 提供用于主轴驱动的偏转皮带轮 （机器由前任所有者安装，并带有 气动主轴作） 平面研磨装置，可手动旋转 带泵的冷却液
机器编号：20932 工作电压：3 x 400 VAC 频率：50/60 赫兹。 额定电流：46A 63A 控制电压：200-240 VAC 功率： 28 kW 控制： 刀架： 磨头： 磨削主轴： 主轴可通过电机旋转 驱动功率：7.5 kW 转速：0 – 9000 转/分 镜头卡口： 圆盘直径： 最大切片数： 旅行： X：380 毫米 Y：280毫米 Z：280 毫米 饲料： X 和 Y 轴：20000 毫米/分钟 Z轴：10000毫米/分钟 旋转轴： 名称：C轴 旋转角度：340 进给：最大 66/s 轴： A轴：旋转无穷无尽 进给：最大 167/s 包括制造商 ARO 的油冷却和冷却系统 包括各种配套的机器配件，如刀架、冷却液管路和其 夹紧装
x-axis: 700 mmy-axis: 410 mmz-axis: 500 mmfeed range: 30000 mm/minA-Axis: 175 mmC-axis: 320 °workpiece dia.: 340-500 mmworkpiece length: 700-1000 mmworkpiece weight max.: kgmax. dia. of grinding wheel: mmspeed spindle max.: 8000 U/min.power capacity: 11,5 / 14,5 kWControl: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mmtotal power requirement: - kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3 x 2,6 x 3,55 m5 AXIS CNC TOOL AND CUTTER GRINDER- CNC Control Siemens 840Dsl- Milling Unit– Tooling- high-pressure coolant system- Tool ChangerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
杯轮直径：180 毫米 杯轮转速：2900转/分 电气。连接：380 V，2900 rpm，0.9 kW 振动台尺寸：200 x 350 毫米 倾斜摆动台 摆动桌可旋转 +/- 20° 尺寸：750 x 350 x 1270 毫
Year: ca. 1970 magnetic plate size: 520 x 200 mmweight of the machine ca.: 1,4 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle turning speed range: 170 - 18000 U/minweight of the machine ca.: 7,5 tdimensions of the machine ca.: 5,00 x 4,00 x 2,20 m--> Control conversion (2014) to Siemens Sinumerik 840D Solutionline--> Technical data Grinding diameter: 20 - 300 mm--> Oscillation diameter: 350 (500) mm--> Workpiece length: 300 (1300) mm--> Recommended grinding depth up to: 300 mm--> Grinding table stroke Z-axis (total): 650 (950) mm--> Resolution: 0.001 mm--> Rapid traverse: 12 m/min-1--> Grinding stroke speed: 0 - 9.99 m/min-1--> Feed rate: 0 - 99.99 m/min-1--> Step feed value during reversal: 0 - 0.999 mm--> Grinding table stroke X-axis (total): 150 mm--> Resolution: 0.001 mm / Ø--> Rapid traverse: 5 m/min-1/R--> Grinding stroke speed: 0 - 5 m/min-1/R--> Feed rate: 0 - 99.99 m/min-1/R--> Step feed value during reversal: 0 - 0.999 mm / Ø--> Swivel capability of the workpiece headstock:--> B-axis: -32° ...
钻头直径：3 - 50 mm钻孔长度：500 mm滑移角度：90 - 140 电压：380 V机器重量约：120 kg机器尺寸约：0,80 x 0,60 x 1,30 m序列号：76658此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
报价 73066 规格： - 砂带尺寸约 2000 x 150 毫米 - 平面磨削开口约 560 x 150 毫米 - 砂带速度约 30 米/秒 - 接触式垫圈 B 150 / D 200 mm - 驱动皮带轮 B 150 / D 200 mm - 驱动 400 V / 3 kW - 工作高度可调 - 单独的 mot。除尘 - 大约空间需求 宽 750 x 高 1050 x 深 1500 毫米 - 空间要求 para. 约。 宽 750 x 高 1250 x 深 750 毫米 - 重量约 180公斤
磨削长度：500 毫米磨削宽度：200 毫米工件高度：300 毫米总功率要求：1,5 / 2,2 kW机器重量约：1,6 t机器尺寸约：，6 1,5 1,8 m此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
砂轮直径：200 毫米最大砂轮宽度：32 毫米砂轮孔径：51 毫米砂轮速度：2900 U/min发动机输出：0.9 kWD安装在支架上的双轮磨床此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511,, Device for automatic chamfering of sawblades from Ø 145 mm,, Automatic threading of the grinding wheel,, Automatic fire extinguishing system,, Automatic central lubrication,, Coolant system 400 L with coolant tank with filter system,, Machine lamp,, Oil collecting tray,, 3 sawblade mandrels (loader)., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x ...
可以使用以前用于切割网格的 CNC 切割磨床 Anthratec。2000rpm时切割速度：约42m/s，转速范围：500–3 500rpm，连接负载：30kW，控制：西门子S7-1200。提供文 。可以进行现场检查
磨削长度 600 mm 磨削宽度 320 毫米 工件高度最大 500 毫米 工作台纵向移动 750 毫米 工作台横向移动 340 米 砂轮直径 350 mm 砂轮宽度 40 mm 主轴转速 1500 rpm 垂直快速移动 400 毫米/分钟 功率 3.7 kw 自动交付 磁盘 冷却液设置 重量 2500 公
grinding length: 1000 mmgrinding width: 600 mmworkpiece height: 500 (410) mmtable load: 700 kgtable surface area: 1000 x 600 mmgrinding spindle speed: 4000 U/mingrinding wheel motor: 10/15 kWgrinding wheel size: 400 x 100 x 127 mmControl: ELb Xpress-Cube total power requirement: 28 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4,1 x 2,7 x 2,65 mHigh-precision surface and profile grinding machine with Elb COntrol Xpress-Cube and grinding program.The operating concept enables fast machining of workpiecesusing manual grinding functions and automatic grinding cycles.Depending on the workpiece to be machined, you can choose between three grindingprocesses.1. FLAT GRINDING,2. PLUNGING GRINDING,3. ECO GRINDING (combined plunging and flat grinding)Magnetic plate,Y and Z axis drive via adjustable AC servo motor,Position measurement in the Y and Z axes via rotary encoder,additiona ...
2003年大修的CNC平面磨床Jung上市。磨削长度：500mm，磨 削宽度：200mm，最大工件高度：250mm，工作台尺寸X/Y： 600mm/200mm，砂轮尺寸X/Y/Z：225mm/25mm/51mm，转速：4200rpm 重量：约2500kg，运行时间：约16602h。提供文档。可以 进行现场检查
tube diameter: 16.0 - 90.0 mmwidth of the strips: 100 mmband length: 1250 mmgrinding band dimension: 100 x 1250 mmtotal power requirement: 2.2 kWweight of the machine ca.: 180 kg.range L-W-H: 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use () New price approx. 4.500 euros Special price on requestThe PN 17/90 is a grinding machine forgrinding pipe and profile ends on the front.Equipment:- electro-motor grinding machine for pipe and profile ends- 10x grinding rollers included in delivery incl. storage area - rear of the machine- simple manual clamping/opening of the material- lateral adjustment of the material clamping system- grinding up to 50° degrees possible- machine base- collecting tray for easy emptying of grinding dust- EMERGENCY OFF button at the front- front privacy screen made of plexiglass- side transport bags for easy transportThe data for this ad was creat ...
width of the strips: 150 mmband length: 2000 mmband speed: 30.0 m/sekgrinding width: 500 Plantisch mmsuction capacity: 630 m³/htotal power requirement: 3.75 kWweight of the machine ca.: 100 kgrange L-W-H: 1100 x 550 x 1035 mmFurnishing :- High quality construction- The drive roller is crowned- this automatically centers the sanding belt in the middle of the roll- Fully vulcanized contact roller for longest service life and smooth running- Tool-free and therefore faster, uncomplicated change of the sanding belt- Stepless height adjustment- for optimal adjustment of the belt sander to the user- Freely adjustable metal stop- for the optimal and safe guidance of workpieces Use of the large surface grinding area- Belt speed optimized in terms of design- thus burning the workpiece during processing can be largely excluded- Extraction equipped with robust and flexible extraction hoses- Motor ...
装料负载：620 升工作罐外径：1695 毫米罐长（膨胀）：3800 毫米工作罐宽度：430 毫米速度：900 - 1485 U/min电压：400 V总连接负载：7.5 kW机器重量约：1600 kg机器尺寸约：1.80 x 1.70 x 1.30 m- 序列号：18585/98-03- 带连续可变电机速度 - 带气动分离挡板此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
longitudinal feed: X: 490 mmVertical feed: Y: 320 mmcross travel: Z: 660 mmSwivel range: C: +/- 200 °Control: HMC 500 WWM Walterlenght tool piece capture: A: 175 mm ISO 50Max. rpm: A: 60 min/-1centre height: 145 (190) mmmax. workpiecediameter: 320 mmmax. workpiece length: 320 (350) mmresolution: 0,0001 °Resolution: 0,0001 mmGrinding spindle:: spindle diameter: 80 mmgrinding wheel diameter: max. 200 mmMax. rpm: 0 - 7.000 min/-1driving power - grinding spindle: 24 kWmax. Torque: 6 Nmtotal power requirement: 35 kVAweight of the machine ca.: 4,65 tdimensions of the machine ca.: 3,6 x 2,5 x 2,95 mDocuments: pallet loading station: CNC - Tool-Grinding-MachineWALTER - Helitronic Power ProductionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
