磨床 二手 出售 (2,509)

砂轮直径：250 毫米连接负载频率：230 伏：90 - 180 U/min机器重量约：18 公斤尺寸：470 x 300 x 440 米变速磨刀装置 砂轮 250 x 50 x 12 毫米，粒度 220皮革盘 200 x 30 x 12 毫�

turning speed range - grinding spindle: 4500 U/minmax diameter of the vice bore: 17,5 mmmax. radius to grind: max. 10 mmmax. lateral adjust. of milling cutter: 10 max. longitudinal adjust. of milling cutter: 40 max. angle for relief grinding: 45 Gradweight of the machine ca.: 125 kgOperating instructions availableincluding collet set, grinding wheel flange wrench and the following special accessories:- Aluminium oxide grinding wheel- 3 diamond grinding wheels, different versions- 1 additional grinding wheel holder with diamond grinding wheel- Dressing diamond- Grinding dust coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

最大磨削直径： / mm磨削长度： / mm工件长度： / mm总功率要求： kW机器重量 ca.： t机器尺寸 ca.： m该广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案�

规格： - 砂带尺寸约为 2000 x 150 毫米 - 表面磨削开口约 560 x 150 毫米 - 砂带速度约 30 米/秒 - 接触垫圈 B 150 / D 200 mm - 驱动皮带轮 B 150 / D 200 mm - 驱动 400 V / 3 kW - 工作高度可调 -莫特。除尘 - 空间要求 宽 750 x 高 1050 x 深 1500 毫米 - 重量约 120 千克

max. wheel diameter: 330 mmgear width: 180 mmmax. module: 7 min. module: 0,5 total power requirement: 12 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

砂轮最大直径： 800 mm砂轮最大宽度： 250 mm磨台： 可摆动： 分级总功率要求： kW机器重量 ca.： t机器尺寸 ca.： m双面精磨机，修整器，冷却液装置，旧款 M.

最大研磨直径：30 mm导轮宽度：12 mm砂轮最大宽度：mm总功率要求：kW机器重量 CA.：T机器尺寸 CA：M

max. wheel diameter: 280 mmgear width: 330 mmmax. module: 5 min. module: 1 Control: LIEBHERR CNC total power requirement: 28 kWweight of the machine ca.: 12 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 460 mmthreading length: 900 mmthread pitch: 100 mmtotal power requirement: 10 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1600 mmgrinding width: 600 mmworkpiece height: 500 mmtotal power requirement: 50 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

连接负载频率：230 V重量：4,7 kg范围长-宽-高：620 x 240 x 180 毫米输出：0,8 KW研磨带尺寸：40 x 760 毫米最大管径：180 毫米带速：2,4 - 9,1 米/秒管材研磨/精加工�

砂轮最大直径：200 mm砂轮宽度：32 mm锥度直径：30 mm连接负载频率：230 V发动机输出：0.9 KW重量：28 kg尺寸：0.56 x 0.32 x 0.30 m

table diameter: mmworkpiece height: mmnumber of wheels: 2 total power requirement: 11 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: mmworkpiece height: mmnumber of wheels: 2 total power requirement: 8 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

砂轮直径：250 毫米连接负载频率：230 V车削速度：90 U/min总功率要求：0.2 kW机器重量约：18 公斤尺寸：470 x 300 x 440 米磨刀机砂轮 250 x 50 x 12 毫米，粒度 220皮革盘 200 x 30 x 12 毫�

最大磨削直径： - mm磨削长度： - mm工件长度： - mm控制： 总功率要求： - kW机器重量 ca.： - t机器尺寸 ca.： - m

x-travel: 400 mmy-travel: 250 mmworkpiece height: mmControl: CNC 314 ELESTA total power requirement: 15 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mH A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding MachineModel S 3 – CNC 314 Year approx.. 1990 S/N 32086 ____________________________________________________________Table size, approx. 600 x 380 mmMax. load on table, approx. 300 kgTable travel, longitudinal, max. (X Axis) 400 mmTable travel, cross, max. (Y Axis) 250 mmVertical adjustment of grinding head max. (W Axis) 450 mmStroke of grinding spindle, max. (Z Axis) 120 mmTable Longitudinal and cross feeds  ...

研磨范围： 2 - 13 毫米锐角 最小/最大： 90 - 140 升降位连接负载： 230 伏机器重量约： 10 公斤机器尺寸约： 0.35 x 0.2 x 0.2 �

workpiece diameter: 320 mmthreading length: 570 mmthread pitch: 315 mmtotal power requirement: 17 kWweight of the machine ca.: 12 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mmgrinding width: 500 mmworkpiece height: 425 mmtotal power requirement: 15 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding range: 3 -28 mmangle adjustable from - to: horizontal 0-180 Gradangle adjustable from - to: vertikal 0-45 Gradangle adjustable from - to: negativ 0-52 Gradclamping range: 3 - 28mm mm0: 5200 U/minconnected load: 230 / 250 Volt / Wattwheel diameter: 100 x 50 x 20 mmweight of the machine ca.: 45 Kgdimensions: 0,5 x 0,4 x 0,4 mThis grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more.comes standard with:Lathe tool accessoriesDrill accessoriesAccessories for milling5C spring collet (4-6-8-10-12 mm)Clutch key 38-42Grinding wheel wrenchAllen key M3-M8screwdriverDiamond grinding disc Ø 100 x 50 x 20Grinding wheel: Ø 100 x 50 x 20Diamond penSpring collet: 3/16 - 5/16 - 3/8 - 1/2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table diameter: 1000 mmgrinding height: 500 mmgrinding head - power requirement: 15/5,5 kWtotal power requirement: 30 kWweight of the machine ca.: 18 tdimensions of the machine ca.: mS I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machinewith two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990_______________________________________________________Max workpiece Ø 1,000 mmMax. height of workpiece, approx. 400 mmMounting height under grinding spindles approx. 500 mmGrindable Bore Ø, approx. 50 – 900 mmMax. Workpiece weight approx..  ...

thread dia.: 254 mmgrinding length: 350 mmthread pitch: 51 mmControl: SIEMENS S 8 total power requirement: 12 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: mB A H M Ü L L E RAutomatic Internal Thread Grinding Machine Model IPE 12 i.S.Year 1985 Serial No. 103174_______________________________________________________workpiece Ø, max. 300 mmworkpiece length, approx. 350 mmheight of centers (WP spindle/grinding spindle) 300 mmtable stroke approx. 450 mmthread diameter ground max. approx. 254 mmthread diameter ground min. approx. 25,4 mmthread length ground in one setting max. 250 mmLead ran ...

砂轮直径：200 毫米工作站数量：2 Stück连接负载频率：230 V总功率要求：0.9 kW机器重量约：20 公斤尺寸：0.65 x 0.32 x 0.35 �

x-travel: 400 mmy-travel: 250 mmworkpiece height: 485 mmControl: ELESTA CNC 314 total power requirement: 10 kWweight of the machine ca.: 4000 kgdimensions of the machine ca.: mH A U S E RCNC - Controlled Vertical Precision Coordinate Grinding MachineModel S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463____________________________________________________________Table size, approx. 600 x 380 mmMax. load on table, approx. 300 kgTable travel, longitudinal, max. (X Axis) 400 mmTable travel, cross, max. (Y Axis) 250 mmVertical adjustment of grinding head max. (W Axis) 450 mmStroke of grinding spindle, max. (Z Axis) 120 mmTable Longitudinal and cross feeds  ...

x-travel: 650 mmy-travel: 450 mmworkpiece height: 585 mmControl: ADCOS CNC 400 total power requirement: 15 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: mH A U S E R (Switzerland)CNC Controlled Hi Precision Double Column Jig GrinderModel S 40 – CNC 311 / ADCOS 400 CNCYear 1981 / CNC modernized in 2008 # 0126__________________________________________________________________ ___Table size approx. 630 x 770 mmTable load capacity approx. 500 kgTable travel longitudinal max. (X) 650 mmGrinding head slide cross max. (Y) 450 mmVertical adjustment of cross rail max. (W) 500 mmGrinding spindle stroke max. (Z) 140 mmStroke number of grinding head (4cycles)  ...

workpiece diameter: 600 mmworkpiece weight: 400 kgworkpiece height: 300 mmtotal power requirement: 35 kWweight of the machine ca.: 4500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for automatic cutting and surface grinding of hard metal and HSS rods with high precision for standard and special solutions Accessories: Total enclosure,, Automatic feed (hydro-pneumatic),, Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703,, Length positioning freely programmable,, Control system Siemens Simatic HMI,, Preparation for connection to central coolant system., Workpiece diameter with loading magazine: 3 - 20 mm, Workpiece length without loading magazine: 3-32mm, Workpiece length with loading magazine: 3-350mm, Workpiece length without loading magazines: 1-450mm, Spindle speed grinding spindle: 2000 rpm,, mass: approx. 1,700 kg, weight: approx. 1,700 kg, Dimensions L x W x H: 1900 x 1200 x 2400 mm, colour: Gray

grinding diameter: 360 mmgrinding length: 1600 mmcentre height: 180 mminternal diameter: 0 mmgrinding depth: 0 mmswing diameter: 0 mmtotal power requirement: 40 kWweight of the machine ca.: 10000 kgdimensions of the machine ca.: mK A R S T E N S (Germany) Universal CNC” - Cylindrical Internal and Face Grinding Machinealso for grinding excentric and cam profiles and polygons and evensuitable for Threadgrinding Model K 51 – 1500Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mmCylindrical Grinding: Grinding Ø, approx. 5 - 360 mmGrinding wheel: Ø x width x bore 500 x 100 x 127 mmGrinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rp ...

grinding height: 60 mmgrinding width: 120 mmgrinding wheel diameter: 600 mmgrinding length: mmworkpiece height: 60 mmtotal power requirement: 50 kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mD I S K U S (Germany)Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 ______________________________________________________________________ ________Grinding wheels Ø x bore, each 600 mmGrinding wheels height x width, approx. 60 mmWorkpiece dimensions:Grinding height x grinding width, approx. 60 x 120 mmVertical adjustment of each grinding head 150 mmExternal Ø of workpiece carrier disk, approx. ...