子类目
(三级类目)
生产厂家:
(品类: 104)
width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 220 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 200 mmband length: 1490 mmband speed: 8.0 m/secmotor: 400 Voltloading area: 500 x 280 mmtotal power requirement: 1.5 kWDimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 使用：内圆磨床 • 制造商：OVERBECK、Herborn • 型号：250 I-HA • 工厂编号：261991 • 建造年份：1971 • 夹紧直径：最大 140 毫米 • 可磨孔长度：最大约 150 毫米 • 可磨孔径：最大约 0.8-80 毫米 附件：不带内圆磨削主轴 不带用于内圆磨削主轴的驱动电机 提供用于主轴驱动的偏转皮带轮 （机器由前任所有者安装，并带有 气动主轴作） 平面研磨装置，可手动旋转 带泵的冷却液
机器编号：20932 工作电压：3 x 400 VAC 频率：50/60 赫兹。 额定电流：46A 63A 控制电压：200-240 VAC 功率： 28 kW 控制： 刀架： 磨头： 磨削主轴： 主轴可通过电机旋转 驱动功率：7.5 kW 转速：0 – 9000 转/分 镜头卡口： 圆盘直径： 最大切片数： 旅行： X：380 毫米 Y：280毫米 Z：280 毫米 饲料： X 和 Y 轴：20000 毫米/分钟 Z轴：10000毫米/分钟 旋转轴： 名称：C轴 旋转角度：340 进给：最大 66/s 轴： A轴：旋转无穷无尽 进给：最大 167/s 包括制造商 ARO 的油冷却和冷却系统 包括各种配套的机器配件，如刀架、冷却液管路和其 夹紧装
x-axis: 700 mmy-axis: 410 mmz-axis: 500 mmfeed range: 30000 mm/minA-Axis: 175 mmC-axis: 320 °workpiece dia.: 340-500 mmworkpiece length: 700-1000 mmworkpiece weight max.: kgmax. dia. of grinding wheel: mmspeed spindle max.: 8000 U/min.power capacity: 11,5 / 14,5 kWControl: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mmtotal power requirement: - kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3 x 2,6 x 3,55 m5 AXIS CNC TOOL AND CUTTER GRINDER- CNC Control Siemens 840Dsl- Milling Unit– Tooling- high-pressure coolant system- Tool ChangerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
杯轮直径：180 毫米 杯轮转速：2900转/分 电气。连接：380 V，2900 rpm，0.9 kW 振动台尺寸：200 x 350 毫米 倾斜摆动台 摆动桌可旋转 +/- 20° 尺寸：750 x 350 x 1270 毫
spindle turning speed range: 170 - 18000 U/minweight of the machine ca.: 7,5 tdimensions of the machine ca.: 5,00 x 4,00 x 2,20 m--> Control conversion (2014) to Siemens Sinumerik 840D Solutionline--> Technical data Grinding diameter: 20 - 300 mm--> Oscillation diameter: 350 (500) mm--> Workpiece length: 300 (1300) mm--> Recommended grinding depth up to: 300 mm--> Grinding table stroke Z-axis (total): 650 (950) mm--> Resolution: 0.001 mm--> Rapid traverse: 12 m/min-1--> Grinding stroke speed: 0 - 9.99 m/min-1--> Feed rate: 0 - 99.99 m/min-1--> Step feed value during reversal: 0 - 0.999 mm--> Grinding table stroke X-axis (total): 150 mm--> Resolution: 0.001 mm / Ø--> Rapid traverse: 5 m/min-1/R--> Grinding stroke speed: 0 - 5 m/min-1/R--> Feed rate: 0 - 99.99 m/min-1/R--> Step feed value during reversal: 0 - 0.999 mm / Ø--> Swivel capability of the workpiece headstock:--> B-axis: -32° ...
报价 73066 规格： - 砂带尺寸约 2000 x 150 毫米 - 平面磨削开口约 560 x 150 毫米 - 砂带速度约 30 米/秒 - 接触式垫圈 B 150 / D 200 mm - 驱动皮带轮 B 150 / D 200 mm - 驱动 400 V / 3 kW - 工作高度可调 - 单独的 mot。除尘 - 大约空间需求 宽 750 x 高 1050 x 深 1500 毫米 - 空间要求 para. 约。 宽 750 x 高 1250 x 深 750 毫米 - 重量约 180公斤
砂轮直径：200 毫米最大砂轮宽度：32 毫米砂轮孔径：51 毫米砂轮速度：2900 U/min发动机输出：0.9 kWD安装在支架上的双轮磨床此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511,, Device for automatic chamfering of sawblades from Ø 145 mm,, Automatic threading of the grinding wheel,, Automatic fire extinguishing system,, Automatic central lubrication,, Coolant system 400 L with coolant tank with filter system,, Machine lamp,, Oil collecting tray,, 3 sawblade mandrels (loader)., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x ...
可以使用以前用于切割网格的 CNC 切割磨床 Anthratec。2000rpm时切割速度：约42m/s，转速范围：500–3 500rpm，连接负载：30kW，控制：西门子S7-1200。提供文 。可以进行现场检查
磨削长度 600 mm 磨削宽度 320 毫米 工件高度最大 500 毫米 工作台纵向移动 750 毫米 工作台横向移动 340 米 砂轮直径 350 mm 砂轮宽度 40 mm 主轴转速 1500 rpm 垂直快速移动 400 毫米/分钟 功率 3.7 kw 自动交付 磁盘 冷却液设置 重量 2500 公
2003年大修的CNC平面磨床Jung上市。磨削长度：500mm，磨 削宽度：200mm，最大工件高度：250mm，工作台尺寸X/Y： 600mm/200mm，砂轮尺寸X/Y/Z：225mm/25mm/51mm，转速：4200rpm 重量：约2500kg，运行时间：约16602h。提供文档。可以 进行现场检查
width of the strips: 150 mmband length: 2000 mmband speed: 30.0 m/sekgrinding width: 500 Plantisch mmsuction capacity: 630 m³/htotal power requirement: 3.75 kWweight of the machine ca.: 100 kgrange L-W-H: 1100 x 550 x 1035 mmFurnishing :- High quality construction- The drive roller is crowned- this automatically centers the sanding belt in the middle of the roll- Fully vulcanized contact roller for longest service life and smooth running- Tool-free and therefore faster, uncomplicated change of the sanding belt- Stepless height adjustment- for optimal adjustment of the belt sander to the user- Freely adjustable metal stop- for the optimal and safe guidance of workpieces Use of the large surface grinding area- Belt speed optimized in terms of design- thus burning the workpiece during processing can be largely excluded- Extraction equipped with robust and flexible extraction hoses- Motor ...
Rösler 提供完整的振动精加工系统，由多个组件组成。1） 槽式系统 Rösler R 550/4600 DA，连接负载：15kW，重量：约 6000kg。2） 水处理离心机 Rösler Z 600 ASS-1-Turbo。3） 输送带 Rösler R 360/4100 FB/S，输送带长度：8220mm，宽度：379mm，重量：约 400kg。4）输送带Rösler R 360/2800 FB/T，输送带长度：5650mm，宽度：379mm，重量：230kg。5 卸料带 Rösler R 600/2000 FB/T，皮带长度：4050mm，宽度：620mm，重量：约 310kg。提供文档。可以进行现场检查
grinding length: 7080 mmgrinding width: 500 mmworkpiece height: 330 mmControl: Siemens SIMATIC S7 OP17 Passage height: 330 mmgrinding spindle data: : grinding wheel diameter: 450 mmgrinding wheel width: 100 grinding spindle speed: 6 - 2.100 1/min: 30 kWFeeds: : Longitudinal travel (X-Axis): max. 30 m/minCross travel (Y-Axis): max. 3 m/mintotal power requirement: 30 kWweight of the machine ca.: 22 tdimensions of the machine ca.: 8,0 x 2,0 x 3,2 mEquipment and accessories• Basic machine GÖCKEL U9/500 PL, mechanically and electrically refurbished• Siemens S7 control system and OP17 operating screen• Stand-alone electrical cabinet • Integrated handwheel function on the operating screen• Belt filter system with tank capacity approx. 900 l• 1 grinding wheel flange with grinding spindle• 1 pc. Vertical dresser, mounted on machine bed• DocumentationThe da ...
提供包括附件在内的旧精密外圆磨床 Kellenberger。中心宽度：200mm，中心高度：125mm，最大工 件重量：3kg，最大工件直径：245mm，最大工件长度：13 0mm。可以进行现场检查
提供 CNC 夹具磨床 Hauser。重量：约3000kg，控制：ADCOS CNC 400，控制选项：ASS。包括冷却液系统和各种附件。可 进行现场检查
提供 Grindingmaster 宽带砂光和刷式去毛刺机。工作宽度：900mm，最大工 厚度：150mm，皮带速度：20m/min，输送速度：20m/min， 作台高度调节：+/-75mm。机器尺寸 X/Y/Z：约 2000mm/2000mm/2000mm，重量：约 2000kg。砂刷有缺陷。可以进行现场检查
A complete Rösler mass finishing machine is available. 1) Central mass finishing machine (centrifugal system) Rösler RotoMatic R 280/24 SE, year of construction: 2008, connected load: 18kW, weight: approx. 7500kg. 2) Rotary dryer Rösler RT 550 EURO-So., year of construction: 2008, connected load: 8.9kW, weight: approx. 1050kg. 3) Rösler R 290/4500 FB/T conveyor belt, year of manufacture: 2008, belt width: 290mm, belt length: 4900mm, connected load: 0.55kW, weight: approx. 430kg. 4) Buffer chute Rösler R 16/6/4 PR, year of construction: 2008, connected load: 4kW, weight: approx. 570kg. 5) Feeding unit Rösler BE 200 K-So., year of manufacture: 2008, connected load: 1.1kW, weight: approx. 200kg. Documentation available. On-site inspection is possible.
数控外圆磨床 GSN Schleiftechnik 包括自动纸带过滤器、中心点、金刚石修整瓦和砂轮 换辅助工具。工件长度：1500mm，最大工件直径：250mm ，最大工件重量：150kg，机器尺寸 X/Y/Z：约 6300mm/2500mm/2500mm，重量：约 9000kg，控制：西门子 Sinumerik 840D 电力线。可用的文档。可以进行现场检查
可提供 ELB 循环控制平面磨床。磨削长度：600mm，磨削宽度：375mm ，最大工件高度：375mm，磁力夹板尺寸 X/Y：1000mm/375mm，工作台行程：525mm，工作台速度：30m/m in，最大工作台负载：300kg。机器尺寸 X/Y/Z：约 2550mm/2050mm/2500mm，重量：约 4000kg。包括一个冷却液装置。St Möglich.
控制 Siemens Sinumerik 840D 最大工件直径： 250 mm 最大工件长度： 1500 mm 最大工件重量： 150 kg 内磨装置 纸带式过滤器 定心尖端 金刚石修整瓦 砂轮更换辅助装置
A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.
grinding diameter: 140 -1260 mmgrinding length: 5000 mmswing diameter: mmcentre height: 1000 mmcentre distance: 8000 mmgrinding wheel size: 800 x 80 x 305 mmControl: Allen Bradley PLC workpiece weight max.: 35000 kgspindle drive: 30 kWgrinding wheel turining speeds: 720 - 1800 U/minfeeds of grinding head: 60 - 4000 mm/mingrinding feed: 0,0125 mm/Uworking spindle drive: 45 kWwork piece spindle speed: 240 - 2400 U/mintotal power requirement: - kWweight of the machine ca.: - t2008 Electrical UpgradeComputer ControlledAllen Bradley Powerflex Digital DrivesAllen Bradley 1606-XL Power SupplyN-Tron 508 XT Ethernet CardAllen Bradley Panelview Plus 1250 Digital ReadoutsAllen Bradley PLC CompactLogix L32E- Crowning and Cambering Capabilities- Stationary Rotating Roll with Travelling Grinding Carriage- 2 Steadies- Servo Drives: Headstock & Grinding Wheel,- Rapid Traverse Cross Slide- Grinding Spin ...
grinding diameter: 250 - 1650 mmgrinding length: 1000 - 8000 mmswing diameter: mmcentre height: 1000 mmcentre distance: 8000 mmgrinding wheel size: 760/900 x 100 x 305 mmControl: Allen Bradley PLC workpiece weight max.: 75000 kgspindle drive: 66 kWgrinding wheel turining speeds: 375 - 1125 U/minfeeds of grinding head: 35 - 2600 mm/mingrinding feed: 0,0025 - 0,05 mm/Utotal power requirement: - kWweight of the machine ca.: - tRough Grinding, Finish, Fine & Superfinish GrindingRe-Conditioning Work Rolls and Back-Up RollsHard & Soft Rubber RollsMachining of: Cylindrical, Convex and Concave Rolls of Various Materials2018 Electrical UpgradeAllen Bradley PowerFlex Digital Drives 755Allen Bradley 1609 SPO Ethernet Network CardAllen Bradley PLC- Continuous In-Feed Mechanism of the Grinding Wheel for Compensation of Wheel Ware- Dynamic Wheel Balancing- Electronic Vibration Indicator- Wheel Mount- ...
