mekanik elleçleme için diğer makineler kullanılmış satılık (5,499)

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers-Conveyor belt rollers: transport rollers diameter 60 mm-Total length: 1470 mm-Shots: M10-Sprockets: 2x Ø 62 mm 14 teeth-Quantity: 1x transport rollers available-Dimensions: Ø 60 x 1470 mm-Weight: 6,5 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor -Drive geared motor: 0.37 kW -Belt widths: 15 mm -Length: 400 mm -Adjustable speed: 14-56 m/min -Number: 2x conveyors available Price: per piece -Weight per piece: 88 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder with valve block -Type: D040025AAV10140 T08 -Stroke: 140 mm -Piston rod: Ø 25 mm -Receiver. Ø 20 mm / Hole spacing 320 mm -Dimensions: 360/200/H80 mm -Weight: 7.6 kg.

material lift, roll lifter, assembly lift, carpet roll lifter, lifting lift-Manufacturer: Eska, Materiallift carpet roll lifter 2 pieces / 1 set-Load capacity: max. kg-Lifting height: 415 to 1595 mm-Holder mandrel: see photos-Cable winch: Pfaff 0239004-Price/Delivery: complete-Dimensions: 745/640/H1950 mm-Weight: 70 kg/piece

Pneumatic cylinder, air cylinder, pneumatic ram, air ram, tie rod cylinder-Stroke: 260 mm-Piston diameter: 80 mm-Piston rod: 18 mm-Total length: 610 mm-Total length extended: 870 mm-Weight: 6.55 kg/piece

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: CF-D-160-10 -Shaft: Ø 22 mm (pre-drilled) -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H70 mm -Weight: 9 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: Yalel, multi-purpose cable pulley type Yaletrac 3.2 TON -Load capacity: 3200 kg -Steel cable: Ø 16 mm / not included, selection in stock at an additional cost -Number: 2x cable pull available -Price: per piece -Dimensions: 700/150/H370 mm -Weight: 22 kg/piece

Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, swivel cylinders, tilt cylinders -Manufacturer: Still, hydraulic cylinder, tilting cylinder, double-acting, stroke 50 mm -Type: 654662 -Piston rod: Ø 22 mm -Hole: Ø 17 mm -Number: 2 cylinders available - Price: per piece -Dimensions: 385/68/H85 mm -Weight: 4.1 kg/pc.

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve manifold -Solenoid valves: VUVS-L20-M52-MD-G18-F7 10 pieces -Solenoid coil: VACS-C-C1-1 -Connection block: VABM-B10-20E-G38-10 -Individual components: see photos -Price/Sale: complete -Dimensions: 320/145/H100 mm -Weight: 4.6 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: Pneumax, compact cylinder type 1581.20.15.01.2 -Stroke: 15 mm -Piston: Ø 20 mm -Piston rod: Ø 10 mm -Quantity: 1 cylinder available -Dimensions: 58/36/H36 mm -Weight 0.2 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Manufacturer: Sauter HA 1401 86 38 192 -Hydraulic unit: for power chucks -Drive: 0.75 kW 1410 rpm -Volume flow: approx. 11 l/min -Dimensions: 510/300/H750 mm -Weight: 80 kg

Vacuum ejector, vacuum pump -Manufacturer: Piab, Multi-Ejector Vacuum Pump with Filter -Individual components: see photos -Overall dimensions: 375/210/H290 mm -Weight: 4 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower-Manufacturer: Becker, side channel vacuum pump side channel compressor-Type: SKG 340-2V.02-Drive: Dietz 3.0 kW 2870 rpm-Speed: 2850 rpm-Flow rate: 250 m³/h-Compression pressure: 240 mbar-Dimensions: Ø 480 x 560 mm-Weight: 67 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders-Manufacturer: Festo-Piston: Ø 70 mm-Stroke: 75 mm-Max. Pressure: 12 bar-Pneumatic damping, adjustable on both sides-Number: 1x available-Price: per piece-Dimensions: 100/100/H235 mm-Weight: 3.5 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder for: Pallet stacker, make: OMG, type 214EA -Cylinder made of: stainless steel -Piston: Ø approx. mm -Piston rod: Ø 45 mm -Stroke: 110 mm -Dimensions: 120/160/H310 mm -Weight: 8.4 kg

Vacuum pump, rotary vane pump -Drive: 1.25 kW -Flow rate: 40 m³/h -Vacuum: 150 mbar -Dimensions: 530/320/H250 mm -Weight: 38 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit -Manufacturer: VEM, hydraulic unit from Dorstener APE80-3050 press brake -Drive: VEB Type KMER 132 AC P 7.5 kW 1435 rpm -Flow rate: l/min -Operating pressure: bar -Dimensions: 720/340/H335 mm -Weight: 87 kg

Solenoid valve, directional valve, valve terminal, pump preload valve-Manufacturer: Rexroth, pump preload valve for the SYDFE control system-Type: SYDZ 001-13/300V028M-Dimensions: Ø 75 x 120 mm-Weight: 2.9 kg

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor-Manufacturer: dinamic oil, gearbox type EH211 SN 6.2-Dimensions: see photos-Total dimensions: Ø 230 x 190 mm-Weight: 30 kg

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold type MPAL-VI 569926 -Pressure regulating valve: RR-FTO-KC -End plate: VMPAL-EPL-IPO32 -Solenoid valves: 12 pieces type 533343 / 533346 / 533347 / 533351 -Individual components: see photos -Number: 8x valve manifolds available -Price/Fee: per unit -Dimensions: 260/135/H70 mm -Weight: 1.7 kg/pc.

Wire rope, steel rope, nylon rope, ship rope, rope line-Ship rope: with loops-Nylon rope: Ø 110 mm, length 12 m-Transport dimension: 1630/700/H300 mm-Weight: 70 kg with pallet

Double hydraulic pump, oil pump, gear pump-double pump-Power: 2.2 kW 1420 rpm-Protection class: IP 55-Dimensions: 585/263/H238 mm-Weight: 43 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders-Stroke: 80 mm-Piston diameter: 63 mm-Piston rod: 20 mm-Dimensions: 144/80/H80 mm-Weight: 1.65 kg

Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with discharge conveyor, transfer station-Manufacturer: Grenzebach, transfer station roller conveyor type WRSZP-Drive motor: 0.18 kW 88 rpm-Intermediate dimension: 1480 mm-Conveyor length: 1250 mm-Axle distance: 250 mm-Roller spacing: 250 mm-Rollers: rubberized-Lifting: pneumatic-Belt conveyor length: 1400 mm / belt spacing 500 mm-Number: 2x Transfer station conveyor available-Price per piece-Transport dimensions: 1750/1570/H2020 mm-Weight: 496 kg/pc.

Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven centering unit -stable design -electrically powered -Drive motor: 0.37 kW 76 rpm -Roller width: 1400 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 1100 mm, adjustable -driven: via belt -Number: 2x roller conveyors available Price: per piece -Dimensions: 1400/1500/H1100 mm -Weight: approx. 230 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams-Stroke: 160 mm-Piston diameter: 63 mm-piston rod: 20 mm (connection M 16 x1.5 thread)-Total length: 356 mm-Total length extended: 516 mm-Air inlet and outlet: adjustable-Number: 6x available-Price: per piece-Weight: 3.6 kg

Check valve, non-return valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: Stainless steel -Weight: 0.8 kg

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve-Manufacturer: Siemens, double gas valve-Type: VGD40.065-Connection: DN65-Pmax .: 700 mbar-Dimensions: 285/190 / H210 mm-Weight: 8.3 kg

Caster, swivel caster, transport equipment caster, fixed caster, furniture caster -Swivel caster: with locking mechanism/brake -Wheel: Type Ø 100 x 32 mm -Thread: M12 -Quantity: 15x swivel casters available Price: per piece / Minimum order 4 pieces -Dimensions: 163/60/H150 mm -Weight: 0.6 kg/pc.

Ship propeller, brass gland, brass gland, bronze gland, ship accessories-Stuffing box: Material bronze / steel-Inner part: material bronze-Diameter: outer Ø 855 mm / inner Ø 800 mm, thread pitch 10 mm see photos-Total dimensions: Ø 974 x 293 mm, weight 209 kg-Outer part: steel casing Ø 915/847 mm-Total dimensions: Ø 975 x 385 mm, weight 369 kg-Thread: pitch 10 mm, see photos-Transport dimension: ca.1200/1000/H1020 mm-Total weight: approx. 620 kg