Kaplama atık testereleri LANGZAUNER LZ 5/2 - 3500

ahşap çalışma makineleri / kaplama makineleri / Kaplama atık testereleri

Üretici: LANGZAUNER

model:LZ 5/2 - 3500

Makine türü: Kaplama atık testereleri

İlan No.: 170375422

miktar: 1

tarih: 27.10.2026

Üretim yılı: 2003

yer: Land-de Almanya 40764 Langenfeld

fiyat: 17,900 EUR

Stoktaki makine:evet

Veneer saw long fence LZ 5/2 - 3500, fine-cutting saw with joining unit (planing unit) and veneer stop table
Robust mechanical engineering from Langzauner

A video of the running machine can be sent on request.

For tear-free and joint-tight cutting of veneer, including heavy-cut veneer
Cutting length max. 3500mm
Cutting and joining height max. 40mm
Easy-to-guide unit, runs on two hardened, ground linear guide shafts
Rear storage table with penetrating finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display
Format table is very solidly built and runs on parallel circular guides, it is slightly offset to the right so that cross-sections can be made on the veneer packages on the left side
Angle stop on the stop table and on the front shelf for head cuts of the veneer packages
Special equipment with rack and pinion compensation for the pressure beam, which prevents the pressure beam from being misaligned
pneumatic workpiece clamping, holds even in the middle position
Drive motor saw 2.2kW, milling speed 1.1kW
The motors can be switched on practically on the handle, so they only run when they are needed.
The saw and the milling unit are automatically engaged by compressed air when switched on, and the cutting height can be selected at three heights by means of a turret stop
HM-tipped fine-cut blade, sharpened
Z4 planer head with pulling cut, equipped with new carbide inserts and spare blade
Practical front veneer tray, is automatically pneumatically disengaged when the planing unit is used
Suction connection 150mm with extraction channel
V-belt renewed
CE mark
Emergency stop leash
Instruction manual
On-board tools

Original paint, only a few places re-dabbed
The machine is in excellent condition and has obviously been rarely used.

Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg.

The machine can be demonstrated on site by appointment. We offer
only machines that are ready for demonstration in our warehouse, see "other offers of this year".
provider".
Bu makineyi Facebook'ta paylaşın:

soruşturma

Makine satıcısı mı?

Lütfen isteğe bağlı olarak havale edin

Aranıyor soruşturması mı gönderelim?

Sana kopyalamak mı?

Save input data

Veneer saw long fence LZ 5/2 - 3500, fine-cutting saw with joining unit (planing unit) and veneer stop table
Robust mechanical engineering from Langzauner

A video of the running machine can be sent on request.

For tear-free and joint-tight cutting of veneer, including heavy-cut veneer
Cutting length max. 3500mm
Cutting and joining height max. 40mm
Easy-to-guide unit, runs on two hardened, ground linear guide shafts
Rear storage table with penetrating finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display
Format table is very solidly built and runs on parallel circular guides, it is slightly offset to the right so that cross-sections can be made on the veneer packages on the left side
Angle stop on the stop table and on the front shelf for head cuts of the veneer packages
Special equipment with rack and pinion compensation for the pressure beam, which prevents the pressure beam from being misaligned
pneumatic workpiece clamping, holds even in the middle position
Drive motor saw 2.2kW, milling speed 1.1kW
The motors can be switched on practically on the handle, so they only run when they are needed.
The saw and the milling unit are automatically engaged by compressed air when switched on, and the cutting height can be selected at three heights by means of a turret stop
HM-tipped fine-cut blade, sharpened
Z4 planer head with pulling cut, equipped with new carbide inserts and spare blade
Practical front veneer tray, is automatically pneumatically disengaged when the planing unit is used
Suction connection 150mm with extraction channel
V-belt renewed
CE mark
Emergency stop leash
Instruction manual
On-board tools

Original paint, only a few places re-dabbed
The machine is in excellent condition and has obviously been rarely used.

Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg.

The machine can be demonstrated on site by appointment. We offer
only machines that are ready for demonstration in our warehouse, see "other offers of this year".
provider".
seller offer No. resale 170375422
Bu makineyi Facebook'ta paylaşın:
onaylı
Satıcı

satıcı

logo dealer

Tischlerei Bracht GbR

Bay Bracht
40764 Langenfeld
Germany

RESALE üye beri 2008

  • makine listesi (19)

soruşturma

Makine satıcısı mı?

Lütfen isteğe bağlı olarak havale edin

Aranıyor soruşturması mı gönderelim?

(böyle bir makine için tüm bayilere)

Sana kopyalamak mı?

(soruşturmanızın kopyası e-posta adresinize gönderilecektir)

Save input data

(Save input data for further inquiries)