taşlama makineleri ahşap çalışma kullanılmış satılık (636)

Number of sanding units: 6 St.sanding width: 180 mmSanding height max.: 150 mmSTAEHLE Grinding Machine Type Gloria/Saturn E 180 RF-----------------------------------------Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria)with 2 grinding units, plus top and bottom Roto Finish grinding attachments.1 upper grinding belt1 lower grinding belt2 upper Roto Finish grinding attachments2 lower Roto Finish grinding attachmentsFor a detailed description, please see the accompanying PDF from the manufacturer.Sold on behalf of a customer.The images are from our archive and were taken before the machine was delivered to the customer.(Technical specifications according to the manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brush drum for deburring tubes, profiles and flat metal parts. 2 speeds, balanced rotor on bearings, rear suction connection, wide protective housing. Condition: New, never used, in its original case. Specifications (plug optimachines.com):• Power supply: 400 V• Motor power: 1.3/1.8 kW• Brush diameter: 250 mm• Brush width: 40 mm• Brush bore: 25 mm• Brush rotation speed: 1450/2850 rpm• Suction tubing diameter: 50 mm• Dimensions (L x W x H): 415 x 476 x 356 mm – net weight 36 kgDelivered with: Brush wheel wire thickness 0.35 mm. Case size: 52 x 47 x 46 (cm) Auction-ID: A1-50698-15

total power requirement:0,55 kwOverall size:800 x 900 x 1600 mmWeight:220 kgaccessories::mit Absaugung 0,2 kw

Combination belt and disc sander for sanding and deburring soft or hard wood. Sanding arm tilts from 0 to 90°, swivel table 0–45°, grey cast iron frame. Condition: New, never used, in original box. Characteristics (plug optimachines.com):• Power supply: 230 V• Motor power: 0.37 kW• Belt width: 100 mm• Sanding disc diameter: 150 mm• Throughput speed: 7.35 m/s• Suction tubing diameter: 63 mm• Dimensions (L x W x H): 460 x 360 x 280 mm – net weight 16.5 kgSupplied with: Angular stop from -60° to +60°, Abrasive belt with grit 80 (dimensions 915 x 100 mm), Self-adhesive sanding disc with grit 80 (diameter 150 mm). Carton size: 56 x 28 x 32 (cm) Auction-ID: A1-50698-3

In good working condition. Beautiful condition. Auction-ID: A3-46133-6194

In good working condition. Weighs at least 100kg. Complete with extra sanding belts. Auction-ID: A3-46133-6195

Equipped with lifting eyes, floor is mounted. Extraction parts do not belong to the machine. Working width 110cm. Equipped with 3 rulers (solid, veneer and lacquer) adjustable in speed. Extraction on the sanding belt. Auction-ID: A1-47362-12

Auction-ID: A1-50076-458

grinding length: 450 / 400 mmgrinding width: 300 mmworkpiece height: 375 mmelectro magnetic clamping plate: 400 x 250 mmgrinding wheel size: Ø 300 x 50 x 76,2 mmdressing device automatic: + Kompensation coolant tank: 210 loil volume: H-LP 68 / ca. 110 lControl: SPS NK total power requirement: 12 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3,5 x 2,5 x 2,5 mFrom a training workshop—first-hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete with additional brush-grinding wheel and polishing wheel Auction-ID: A1-50090-135

Throughput height: 180mm Auction-ID: A1-50090-96

For wooden floors, with sanding belt and extraction Auction-ID: A1-50251-509

Professional stationary long belt sander from MABO Special, Made in Italy, suitable for sanding and finishing larger wooden workpieces such as panels, doors, table tops and furniture parts. The machine is equipped with a long, horizontally running sanding belt and a spacious work table. By means of the manually operated sanding shoe, the sanding belt can be pressed locally and in a controlled manner on the workpiece. This makes the machine suitable for both flat sanding of solid wood and for more controlled finishing work. - Features: Brand: MABO Special Made in Italy Type: Long Belt Sander / Long Belt Grinder Working width: approx. 2,700 mm Sanding belt length: approx. 800 mm Spacious work table for larger workpieces Manually operated sanding shoe Work table/working position manually adjustable Control panel with separate switches Electric drive Industrial CEE connection Ap ...

KÜNDIG PRIMO 1100-E wide-belt sander• Year : 2004• Working width: 1100 mm• Main motor power: 10.5 kW• Power supply : 380 V / 50 Hz• Amperage : 22 A• Adjustable feed speed: 3–15 m/min• Electrically adjustable working height• Electronic \"Smart Select\" control with digital display• Motorised feed belt• Suction: 2 vents Ø 150 mm• Weight : approx. 1200 kg  Auction-ID: A1-50215-4

Machine: Wide belt sander BUTFERING Profiline SWT 335/RRH Year: 2012 Heads: 3 sanding units Working width: 1350 mm Thickness of parts: 3 - 160 mm Detection: Input Roller Feed: infinitely adjustable 2.5 - 13 m/min Abrasive Change: Left Side Auction-ID: A1-50215-3

Number of sanding units: 6 st.sanding width: 45-165 mmSanding height max.: 45-92 mmweight: 2200 kgEcoline Q-SAND 6For sale on behalf of a customer--------------------------------------------Full text as PDF attachment!Short description:Machine with infeed conveyor and automatic height detection.It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit.Technical manufacturers description:Ecoline Q-Sand: the ideal grinder for squared timber and more.Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be us ...

- Sanding width 2600 mm. - Variable feed speed. - It consists of: • Automatic charging station. • STEINEMANN sander for board calibration with sanding rollers. • STEINEMANN sander for finishing with sanding pads. • STEINEMANN dust filter system. • CASSEL digital metal detector. • Slitting station. • Automatic unloading station with 3-position gantry stacker. The roller tables on which the boards are unloaded are NOT included. • Intermediate conveyors. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-19

Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machinemachine will be checked by our technicians--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment  ...

Number of sanding units: 2 st.sanding width: 180 mmSanding height max.: 150 mmMAWEG Robert Hildebrand Saturn DuoProfessional two-belt finish sanding machine with brushing unitDouble-sided, sands from top and bottomPneumatic belt oscillationPneumatic belt tensioningFeed via top and bottom conveyor belts with spring-loadedhold-down rollers, infinitely variable speed (5–15 m/min)Workpiece thickness adjustment with pre-selectable stock removal amount atmachine infeed, based on sensing the raw timber thicknessAdjustment to wood thickness via motorized positioning of themachines upper sectionDigital thickness setting via mechanical counter with 0.1 mm display andzero-point adjustmentSafety switch for oversized wood thickness at machine infeedDouble-sided brushing unit with integrated workpiece blow-offSanding belt blow-off (top and bottom)Belt breakage monitoring switch with automatic shutdo ...

Working width: 910 mmNumber of sanding units: 1 st.Workpiece thickness max.: 3 - 160 mmsanding belt measurements: 2.200 x 1.010 mmFeed motor: 0,55/0,75 kWFeed speed: 4,5 / 9 m/min.Weight: 1.210 kg: 18,5 m/secoutput: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Machine in checking process at the moment!Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimalVibration dampening.Staggered grinding units with large dimensionsBelt drive drums for slip-free belt running. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet tape running. All guides as a ball linear set on hardened andpolished waves. Permanent precision thanks to dust and dirt protectionthe ball linear sets. Contact roller and sanding pad in a balanced ratiofor sanding belt grain load. The large-sized drive  ...

Table dimensions: 1250 x 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 500 mmgrinding width: 200 mmworkpiece height: 250 mmturning speeds: 1000 - 4000 U/mintable surface area: 600 x 200 mmgrinding wheel size: 225 x 20 x 51 mmgrinding spindle drive: 1,5 kWtable feed: 1 - 20 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,6 x 1,6 x 1,8 mAutomatic feed, 2-axis digital display, stepless speed control,Water-cooled sine angle magnetic clamping plate 400x135mm, 10mm magnetic pitchSony digital display with scales for transverse and height adjustmentSwing-out dresser on the grinding headTable direction reversal with contactless inductive switchesLOSMA belt filter coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmLÖWER-DoubleSander Solid DSM 2004----------------------------------Double-sided four-belt single wood sander forSanding solid wood such as window frames etc.Highly stable top design with innovative details. Suitablefor high continuous loads even with higher chip removals.- sanding units arranged one after the other for pre-grinding,Fine sanding and finishing sanding, each from above and below1. Belt sanding unit with heavy steel roller2. Belt sanding unit with rubberized roller and shoe3. Finishing unit with fiber brush- Directly driven grinding rollers for slip-freePower transmission- maintenance and wear-free CERMET-coated grinding wheelsshoes with very good thermal conductivity and absoluteDimensional accuracy- External cooling of the grinding zones for cooler grindingand longer sanding belt service life- f ...

Table dimensions: 1200 x 500 mmsanding belt measurements: 90 mmWeight: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-180 mmHESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE-----------------------------------------------------Manufactur ers description:-----------------------------------------------------Compa ct design designed according to modern principles. Quiet andvibration-free operation thanks to rigid, stable machine housing andspecial insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate.Offset grinding units with large-dimensioned tension rollers forgood heat dissipation and stable sanding belt guidance. Sanding units withforced sanding belt oscillation. 2-point sanding dust extraction directlyon the sanding roller. Airborne dust extraction on the large tension rollers. Integratedsanding belt blower for longer service life of the sanding belts. Integrated brushing an ...

Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmControl: ja weight: 3300 kgDimensions (L/W/H): 2600x920x1890 mmDust suction hood: 2x180, 2x120 mmLöwer DSM 2004 Double-Sided Sanding Machine---------------------------------------------4-Belt Sander + Disc Unit (Top/Bottom)Manufacturers Description:--------------------------------------------- Double-sided, four-belt, single-wood sander for sandingsolid wood such as window frames, etc.Highly stable, top-quality design with innovative details. Suitable for highcontinuous loads, even with high material removal rates.- Sequentially arranged grinding units for roughing, fine grinding,and finishing, each from above and below1. Belt grinding unit with heavy steel roller2. Belt grinding unit with rubberized roller and shoe3. Finishing unit with fiber brush (see optional equipment below)- Direct-drive grinding rollers ...

Number of sanding units: 8 St.sanding width: 25-240 mmSanding height max.: 15-140 mmB ROBA Fentech, Fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine sanding of wood- Sanding after impregnation- Intermediate lacquer sandingAdvantages of the ROBA Fentech system:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm diameter sanding tools optimize sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a straight-through machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...

Number of sanding units: 10 St.sanding width: 25-240 mmSanding height max.: 15-140 mmMB ROBA Fentech ORBITAL, fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine wood sanding- Impregnation sanding- Intermediate lacquer sandingAdvantages of the ROBA Fentech principle:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm sanding tool diameter optimizes sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a through-feed machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...

Number of sanding units: 4 st.sanding width: max. 200 mmSanding height max.: 7-150 mmWorking speed: 8-16 m/minBand Speed: 18-30 m/secStähle-Hess Sanding Machine Saturn-Duo-----------------------------------------------Manufacturers Technical Description:Stähle-Hess Finish Sanding Machine, Model Saturn DuoFeaturing 2 sanding units, plus additional upper and lower Roto-Finishsanding units.1 Upper sanding belt1 Lower sanding belt2 Upper Roto-Finish sanding units2 Lower Roto-Finish sanding unitsWorkpiece DimensionsHeight: 7–150 mmWidth: max. 200 mmMinimum length: 300 mmBelt speed: 18–30 m/s (variable)Feed rate: 8–16 m/min (variable)-----------------------------------------------Price for the above-mentioned machine available upon request!-----------------------------------------------Note: This machine was previously used in conjunction with aWeinig Variomat four-sided planer/moulder ...