metal çalışma makineleri / freze makineleri / Yuvarlak masa freze makineleri
Üretici: DMG MORI
model:CLX 450 TC
Makine türü: Yuvarlak masa freze makineleri
İlan No.: 170386308
miktar: 1
tarih: 28.10.2026
yer:
Almanya
fiyat:
Seller-item-No.:071833
| General | |
| Universal turning-/milling center; Control: SLIMline® Control SIEMENS 840D sl, w/o CELOS | |
| Working area | |
| Swing diameter over guide ways | 500 mm |
| Turning diameter | 400 mm |
| Max. Turning Length | 1100 mm |
| Bar diameter max. | 65 mm |
| Work spindle (left) | |
| Spindle bore | 87 mm |
| Spindle diametre on front bearing | 130 mm |
| Main drive 1 | |
| Drive power (100% DC) | 14 kW |
| Drive power (40% DC) | 17 kW |
| Speed range | - 5000 rpm |
| Bench speed | 485 rpm |
| Torque (100% DC) | 275 Nm |
| Max. torque (40% DC) | 345 Nm |
| Turning-milling spindle | |
| Spindle taper | HSK-A 63 DIN 69893 |
| Spindle speed | -12000 rpm |
| Drive power (100% DC) | 8,8 kW |
| Drive power (40% DC) | 10,5 kW |
| Torque (100% DC) | 73 Nm |
| Torque (40% DC) | 90 Nm |
| locking moment | 850 Nm |
| Swivelling range | +/- 120 degree |
| Tool magazine | |
| Type of magazine | Chain |
| Number of tools | 30 |
| Max. tool diameter | 78 mm |
| Max. tool-Ø with free adjacent pockets | 125 mm |
| Floor space/Weight | |
| Dimensions (L x W x H) | 5,19 x 2,11 x 2,47 m |
| Weight approx. | 11200 Kg |
| Automation package | B-Z0205 (1x) Signal lamp 4-fold coloured B-H7050 (1x) Automatic door, electrical B-L7208 (1x) Electrical interface for Robo2Go B-Z0908 (1x) 3D data model of working area |
| Easy Tool Monitor 2.0 | Tool breakage monitoring Easy Tool Monitor 2.0 Simplified holistic view of the actual state of the tools in Side screen of CELOS Setting of one monitoring limit for each tool selected from the tool list. Easy teaching function to measure monitoring limit |
| Coolant/compressed air switchable on main spindle | Cooling lubricant and compressed air switchable on the main spindle by M-function Note: Only external cooling |
| Coolant/compressed air switchable on counter spindle | Cooling lubricant and compressed air switchable on the counter spindle by M-function Note: Internal and external cooling (if possible) |
| Extension of the discharge chute about 300 mm | Extension of the discharge chute at the chip conveyor about 300 mm |
| BFU 8/20 bar, 600 l | Compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (CTX gamma TC 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6 |
| Chain magazine for 60 tools | Chain magazine 60fold, instead of chain magazine 30fold |
| Tool admission Capto C6, instead HSK-63A | Turn/mill spindle and tool magazine with tool reception Capto C6 (Sandvik) |
| Tool breakage detection Z-Nano, BLUM | Tool breakage detection Z-Nano, BLUM - For tool breakage control - Minimal tool dia.: 0,1 mm (0.0039 in) - Changeable measuring surface Note: No tool length measurement Attention: For the CTX beta 4A, the max. chuck diameter is 350 mm |
| MPC - Machine Protection Control | MPC 1.0 - Machine Protection Control Machine protection by quick shutdown of milling head in less than 0,01 sec - only for TC machines with compactMASTER® - only for machines with CELOS® with Siemens control |
| 3D data model of working area on CD (Step a.IGES). | 3D data model of working area of specified machine as data format Step and IGES. Delivery of 3D data model will be by CD. |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
