Diğer taşlama makineleri (28)

Dişli taşlama makinesi HURTH SRS 400

Auction-ID: A1-47369-2351

Dişli değiştirme makinesi WMW 5822M.

Sanding belt size 150 x 2000 mm, belt speed approximately 30 m/s, grinding diameter approximately 20-114.3 mm, adjustable grinding angle approximately 30-90°, operation with handwheels and lever, suitable for round tube / square tube / rectangular tube, adjustable clamping, Auction-ID: A1-50997-17

Bant taşlama ataşmanı ile mil taşlama makinesi Özellikler: - Esnek şaft 1500 mm - 5 hız - Bant taşlama ataşmanı - Sürücü 380 V - mobil alt şasi - Alan gereksinimi yaklaşık. G 600 x Y 1400 x D 600 mm - Ağırlık yaklaşık. 80 kg

Auction-ID: A1-51634-26

as good as new, hardly any signs of wear, fully functional and complete Auction-ID: A1-51816-28

Used grinding machine Manufacturer: TORMEK Type: SUPER GRIND 1200 Wet grinding machine for cutting tools Performance: 0.12 kW 220V Total dimensions: approx. 600 x 400 x 300 mm Scope of delivery see photos! Changes and errors in the technical data, specifications and prices reserved. Viewing on 20.11.26 only with prior registration at r.schober@kobran.de! Attention! We dismantle and load for you. You just have to organize a transport.; For this service, the additional costs shown are.; Auction-ID: A1-51900-58

Max. sanding length 610 mm, max. sanding width 305-400 mm Auction-ID: A1-51634-12

220V Swiss made Dimensions: 150x67x170cm Weight aprox. 500KG Auction-ID: A1-47367-3557

Drill grinding machineGrinding range 2 - 20 mmAcute angle min./max. 90 - 135 degreesConnected load 230 VMachine weight approx. 8.6 kgDimensions approx. 0.35 x 0.2 x 0.2 mCondition: never used / new (5) Auction-ID: A7-51438-502

Grinding range 2 - 13 mmSharpening angle min./max. 90 - 140 degreesConnected load 230 VMachine weight approx. 10 kgDimensions approx. 0.35 x 0.2 x 0.2 mCondition: never used / new (5) Auction-ID: A7-51438-489

Saw blade grinding machine with:- Diamond grinding wheel for carbide circular saw blades- Rubber feet for damped and low-noise operation- Spacers for different saw blade holesWithout saw blade Saw blade diameter 80 - 700 mmWorkpiece headstock motor 0.25 kWGrinding wheel diameter 125 mmSpeed 2850 rpmGrinding range -20 to +20 degreesMachine weight approx. 12 kgDimensions approx. 700 x 400 x 300 mCondition: never used / new (5) Auction-ID: A7-51438-422

Drill bit grinder:Additional station for grinding back the drill cutting surface (free angle)25tk. Collets ER 40 are included, these are also suitablefor clamping intermediate sizes. For grinding twist drills made of HSS andcarbide with a TiN layer of 8 - 32 mm.Rotor with precision ball bearings guarantees smooth running. Vibration-free running due to high weight and rubber feet. Sharpening angle adjustable for all common twist drills. Packaging dimensions:430 x 240 x 240mm. Weight 16Kg.Grinding range 8 - 32 mmSharpening angle min./max. 90 - 140 degreesConnection voltage 230 VCondition: never used / new (5) Auction-ID: A7-51438-456

This grinder is ideal for regrinding tools such asface mills, drills, TIG welding needles, and more. is supplied as standard with:Accessories for lathe toolsAccessories for drills Accessoriesfor milling5C Spring collet pliers (4-6-8-10-12 mm)Clutch wrench 38-42Grinding disc wrenchAllen key M3-M8ScrewdriverDiamond grinding wheel Ø 100 x 50 x 20Grinding wheel: Ø 100 x 50 x 20Diamond pinSpring collets: 3/16\" - 5/16\" - 3/8\" - 1/2\" Grinding range 3 -28 mmAngle adjustable from - to horizontal 0-180 degreesAngle adjustable from - to vertical 0-45 degreesAngle adjustable from - to negative 0-52 degreesClamping range 3 - 28mm mmSpeed 5200 rpmConnected load 230 / 250 Volt / WattDisc diameter 100 x 50 x 20 mmMachine weight approx. 45 KgDimensions L x W x H 0.5 x 0.4 x 0.4 mCondition: never used / new (5) Auction-ID: A7-51438-407

Belt width 75 mm On a mobile chassis Auction-ID: A1-50663-1643

USED KLEIN CENTER STITCH GRINDING MACHINE Max. length between tip: 1200 mmDimensions and weight1 Euro pallet weight 400 kg Auction-ID: A1-50950-35

Checked and ready to work Auction-ID: A7-50988-112

Checked and ready to work Auction-ID: A7-50988-115

Checked and ready to work Auction-ID: A7-50988-114

Checked and ready to work Auction-ID: A7-50988-113

Checked and ready to work Auction-ID: A7-50988-116

CONTROLS  electronic controls ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 Hz

Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system., Weight approx: 1700 kg, Dimensions W x D x H: 1900 x 1200 x 2400 mm, Cutting disc diameter: Max. 200 mm, Drive power grinding motor: 4,0 kW, Workpiece length without loader magazines: 3 - 450 mm, Workpiece diameter without loading magazine: 3 - 32 mm, Workpiece length with loader magazine: 1-350 mm, Workpiece diameter with loading magazine: from 3 - 20 mm

Üniversal takım ve kesme taşlama makinesi TACCHELLA 4 - Üniversal cihaz, Masanın hidrolik hareketi., Teknik verilerle ilgili bilgiler bağlayıcı değildir., Makine önceden satışa tabidir., Boyuna hareket x ekseni: 400 mm, Çapraz hareket y ekseni: 250 mm, Çalışma tezgahı ve iş mili ekseni arasındaki boşluk: 375 mm, Tekerlek hızı: 3000/6000 rpm, Tekerlek boyutu: 200x20 mm, Spindle motor gücü: 1,5 Kw, Ağırlık: 1150 Kg, Aksesuarlar: Soğutma sistemi, motorlu bölme cihaz�