подкатегории
(уровень третий категории)
Производитель:
(Категория: 203)
Serial number: 440.07.476.12Support surface: approx. 1500 x 300 mmwith suction nozzleReference: Wup - Lot 12 Auction-ID: A7-49882-296
Key data: 410 mm, 240 mm, 4 kW
SCM 2041 FS Строгальный и рейсмусовый станок Производитель SCM Италия АБ 66989 Код 110830 Год выпуска ок. 1994, из школы в хорошем состоянии 3 Строгальный вал Частота вращения строгального вала 5000 об/мин Строгание: Длина стола 2000 мм Ширина строгания 410 мм Длина опорного стола 1040 мм Длина опорного стола 910 мм Максимальная толщина стружки: 10 мм Забор для швартовки поворотный 0 - 45 Регулировка стола для строгального станка с поворотным рычагом Виброзащита нажимного звена Строгание по толщине: ...
Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled------------------------------------------------------------ ----------This machine is currently being refurbished at our facility!Pictures taken before dismantling and currently during the processing phase!Brief Summary:-------------------------------------------------------------- --------- 5 spindles with 8,000 rpm- 4 x HSK/Powerlock- Axially and radial CNC adjustments of the spindles via control- CNC-controlled adjustment and positioning of the feed- Table tops with guide blades at spindles 2 and 3.- Includes Weinig/Neumann RF 15 return conveyor systemDetailed Description:---------------------------------------------------------- -------------Technical ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 140 mmFeed motor: 4 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage.
Number of spindles: 5 St.Working width: 250 mmWorking height: 150 mmLength of the planing table: 2000 mmFeed motor: 4 kWFeed speed: 6-24 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 630 mm, 230 mm, 5 kW
На продажу — тяжёлый, прочный и точный промышленный рубанок толщиной комода традиционного бренда Kölle type HK 63, длина туалетного столика 2100 мм, ширина рубанка толщиной 630 мм, высота 230 мм, 4 ножа, 5,5 кВт, стальной вытягивающий и вытягиваемый ролик. Пробный запуск и помощь с возможной загрузкой, только вывоз, предоплата или наличные при вывозе, Без гарантии или гарантии. Цена плюс НД
Год изготовления: 1980 Рабочая ширина: 860 мм Рабочая высота: 250 мм Рабочая высота 4 угла: 230 мм Количество шпинделей: 4 Схема шпиндели: u-o-r+l Диаметр шпинделя: X-X-50-50 мм Контрподшипники: 1-2 Мощность двигателя: 11-15-5.5-5.5 кВт Регулировка рабочей ширины: ручная Регулировка рабочей высоты: моторизованная Кормление: 4 Приводные ролики в таблице: 3 Верхние подающие ролики: 3 Константа высоты стола: примерно 800 мм Вес: 4850 кг Напряжение/частота: 380 В 50 Гц 3Ph
Planer CHAMBON R233 Used machine Revised Year:1988 Technical characteristics: Electric up/down Star/Triangle Start Emergency stop Working width: 500 mm HSS Irons Auction-ID: A1-49230-1
Weinig Unimat 300 четырёхсторонний брусальщик Рабочая ширина 230 мм Рабочая высота 120 мм Количество шпинделей 5 Схема шпинделя: 1. Снижение на 5,5 кВт 2. Налево Права на 3,11 кВт 4.Top 5,5 кВт 5. Потеря 4 кВт Скорость подачи регулируется инвертором до 12 минут в минуту Пневматические зажимы Чистая цен
Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.control: Memory-Funktion Weinig Powermat 500 with grooved table----------------------------------The machine arrives at the warehouse and is cleaned and fully inspected.Brief Summary:----------------------------------- 5 Spindles- 8,000 rpm- Grooved table for short or difficult-to-guide workpieces, coatedwith Marathon PowerCoating- One driven roller in the outfeed table, hardened: 210 mm wide- Left and top spindles controlled for width and height- Quick-release spindle nutDetailed Description:---------------------------------------------------------- -------------Technical Data:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 51st Spindle - bottom----------------------------------------------- Motor with brake: 7.5 kWSpindle dia ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-24 m/min.total power requirement: 27 kwDimensions (L/W/H): 3900 x 2200 x 2000 mmweight of the machine ca.: 2500 kgWeinig four-side planer Profimat 23 window version withglazing bead removal,ATS control and program control-------------------------------------Machine will be renovated and functionally checked!Technical data summary(please inquire about any additional accessories included)-------------------------------------Generally--------------- ----------------------> Working width: 230 mm> Working height: 120 mm> Number of spindles: 6 pieces.> Dressing table length: 2500 mm> Feed speed: 5-24 m/min> Total power requirement: 27 kW> Dimensions: 3900 x 2200 x 2000 mm> Machine weight, approx.: 2500 kgSpindle arrangement-------------------------------------> ...
Working width: 410 mmLength of the planing table: 1450 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2650x850x1100 mmweight of the machine ca.: 750 kgSCM Surface planer F 410 N-----------------------------Technical manufacturers description:Planing width: 410 mmTotal table length: 2600 mmTable height: 855 mmFeed table length: 1450 mmAluminum planing fence swivels up to 45°Planing fence dimensions: 1100 x 170 mm4-knife planing shaft diameter: 120 mmKnife shaft speed: 5000 rpmMotor power: 4 kWTERSA monobloc one-way reversible cutterheadSCM dressing protection device integrated in machine stand120 mm diameter extraction nozzleManual star-delta switchMotor protection switch, undervoltage releaseLockable main switchAutomatic motor brakePivoting auxiliary fence-----------------------------Price of the above machine on request!-----------------------------(technical data accor ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 3 kWFeed speed: 5-24 m/min.Dimensions (L/W/H): 3900 x 2200 x 2000 mmweight of the machine ca.: 2500 kgWeinig Profimat 23 Four-Sided Planer – Window Version(With glazing bead separation feature, or usable as a grooving spindle)ATS Control and Program Control-------------------------------------Technical Specifications Summary(Please inquire regarding any additional accessories that may be included)-------------------------------------General----------------- -------------------> Working width: 230 mm> Working height: 120 mm> Number of spindles: 6> Infeed table length: 2500 mm> Feed motor: 3 kW> Feed speed: 5–24 m/min> Total power requirement: 27 kW> Dimensions: 3900 x 2200 x 2000 mm> Machine weight (approx.): 2500 kgSpindle Arrangement------------------------------------ ...
Number of spindles: 6 St.Working width: 240 mmWorking height: 200 mmLength of the planing table: 2500 mmFeed speed: 6-36 m/min.Dimensions (L/W/H): 4900x1700x2000 mmweight of the machine ca.: 3500 kgControl: SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production-----------------------------------------------The machine is in process of partial reconditionning at our facility at the moment.Highlights:- Machine with 6 spindles (2 with HSK mounting)- Spindle speed 8,300 rpm- Working width 240 mm, working height 200 mm- Electronic horizontal and vertical spindle positioning- PRL equipment for glazing bead separation- Air-cushion table- Touchscreen controlTechnical Data:Working width: max. 240 mm (kit for min. width 15 to 25 mm)Working height: max. 200 mmFeed speed: infinitely variable 6 to 36 m/min via inverterInfeed table: length 2,500 mmMachine weight: approx. 3,550 kgDimensions: ...
Technical details Configuration: 5-spindle machine Spindle layout: - Bottom spindle (jointing) - Right spindle - Left spindle - Top spindle - Bottom spindle Working capacity: - Working width: 20–230 mm - Working height: 10–160 mm Feed system: - Feed speed: 5–40 m/min - Feed motor power: 5 kW - Electronic infinitely variable feed adjustment - Pneumatic lifting/lowering of feed roller before first spindle - Quick-change feed rollers - Serrated feed roller Electrical specifications: - Supply voltage: 400 V - Frequency: 50 Hz - IE3 Premium Efficiency motors Control system: - Memory Plus touchscreen control - Storage of axial and radial spindle positions - Electrically adjustable pressure elements - Guided machine setup Right spindle: - Motor power: 11 kW - Spindle diameter: 40 mm - Speed: 7000 rpm - Axial movement: 80 mm - Maximum profiling depth: 35 mm Left spindle: - Motor power: 1 ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled------------------------------------------------------------ -----------The machine renovated and functionally checked !Short summary:-------------------------------------------------------------- ---------6 spindles with 8,000 rpm5 x HSK/PowerlockAxial and radial CNC adjustment of the spindles via controlCNC - controlled adjustment and positioning of the feedDetailed description:---------------------------------------------------------- -------------Technical specifications:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 61. Tool holder - below------------------------------------------------Motor with brake: 5.5 kWSpindle diameter: 40mm ...
Number of spindles: 5 St.Working width: 230 mmWorking height: 160 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-24 m/min.Control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER -------------------------------LIKE NEW, showroom machine !- 5 spindles: bottom, right, left, top, bottom- Speed: frequency-controlled 4,000 - 6,000 rpm- Width and height motor-controlled:left spindle radialupper spindle axial- Feed carriage motorized adjustmentTECHNICAL DATA in Detail-------------------------------Working width (for tool diameter 125-163 mm): 15-230 mmWorking height (for tool diameter 125 mm): 10-160 mm(Tool diameter up to 163 mm): 10-160 mmMin. workpiece length:single piece: min. 800 mmpiece by piece: min. 300 mmThe processing of the work pieces is depending on thefollowing operating parameters:material, wood moisture, tools, diameter of the chip removaland f ...
Number of spindles: 5 St.Working width: 240 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-36 m/min.Weight: ca. 3500 kgcontrol: SCM Control 10 SCM Superset NT with workpiece return----------------------------------The machine is in cleaning and completely checking process at the moment.Brief Summary:----------------------------------- 5 spindles- Powerful motors- Left and upper spindles controlled for width and height- With workpiece return to the operator1st spindle----------------------------------First lower horizontal spindleMotor with brake 7.5 kWDiameter 40 mmSpeed 6,000 rpm2nd spindle----------------------------------First right vertical spindleMotor with brake 7.5 kWDiameter 40 mmSpeed 6,000 rpmT-set quick-clamping system3rd spindle----------------------------------First left vertical spindleMotor with brake 7.5 kWDiameter 40 mmSpeed 6,0 ...
Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: Memory-Funktion Weinig Powermat 600 Compact--------------------------------------------------------------- -------The machine has been cleaned and fully inspected.Brief Summary:----------------------------------- 5 Spindles- Powerful Motors- Left and top spindles controlled for width and heightDetailed Description:---------------------------------------------------------- -------------Technical Data:Working Width: 20-230 mmWorking Height: 10-120 mmNumber of Spindles: 51st Spindle - Bottom-----------------------------------------------Motor with brake: 7.5 kWSpindle diameter: 40 mmSpeed: 6,000 rpmTool Circle: 125-145 mmTool Circle for Rebating Cutter: 130-160 mmAxially Travel: 5 mmRebating DeviceMarathonCoatine for table insert in front of ...
Number of spindles: 9 St.Working width: 240 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 7,5 kWWorking speed: 6-36 m/minweight of the machine ca.: 6500 kgControl: CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015, currently undergoing partial recondtionning in stock------------------------------------------------------------Summa ry:- 9 spindles (including 4 x HSK 85 S)- Electronic horizontal and vertical positioning- 8,300 rpm- SCM Set-up- SCM T-Set- Includes workpiece infeed magazineWorking dimensions:- Maximum working width: 240 mm- Minimum working width: 25 mm (reducible to 15 mm via installed special kit)- Maximum working height: 120 mm- Minimum working height: 10 mm (reducible to 6 mm via installed special kit)Special working cross-section equipment: Equipped with a special kit forextremely small minimum cutting dimensions of 15 x 6 mm.Infeed ta ...
Number of spindles: 6 St.Working width: 230 mmWorking height: 150 mmLength of the planing table: 2000 mmFeed motor: 5,5 kWFeed speed: 7-36 m/min.Kuper SWT 23 XL-6 Four-Sided Planer-----------------------------------------------Machine fully functional tested!... Working width min/max: 18 - 230 mmWorking height min/max: 8 - 150 mmSpindle configuration:1st Spindle - bottom-----------------------------------------------Power: 5.5 kWSpeed: 6,200 rpm, incl. brakeSpindle diameter: 40 mmSpindle length: 240 mmPulley diameter: 160 mmAdjustment: axial and radial, manual2nd Spindle - right------------------Power: 5.5 kWSpeed: 6,200 rpm, incl. brakeSpindle diameter: 40 mmSpindle length: 160 mmPulley diameter: min. 110 mm - max. 200 mmAdjustment: axial and radial, manual, via mechanical digital displayAdjustment: vertical 35 mm below Table3rd Spindle - Left------------------Power: 7.5 kWSpeed: 6,200 ...
Dimensions (L/W/H): 2650x950x1850 mmWeight: 2100 kgTotal power requirement: 15 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: 230 x 130 mm.Spindles: 7Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kWspindles 2, 3, 4 and 5 are 8000 tr/minstraight jointer on 2nd bottom spindleCardan shaft drivePneumatic pressuresIntermediate driven feedroller for short pieces0,8 m infeed straightening tablemanual bed lubricationSpindle diameter: 50 mm.5 driven rollers in tableFeed: 6 - 36 m/min, motor 7,5 kWmotor height adjustment
Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW? Fence / Near 11 kW ? Top 7,5 kW ? Bottom 5,5 kWSpindle speed 6000 rpmVariable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mmDriven table rollerMechanical/digital read-out Centralised lubrication CE sound/safety hoodInterior lightHopperfeed EM 11, upt to 60 cycles/minWorkpiece length: 350 to 3000 mmWorkpiece width: 20 to 230 mmWorkpiece thickness: 12 to 70 mmAir requirement: 8 bar, connection DN8Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/sTooling not included
Capacity: 230 x 130 mm.Number of shafts: 9Bottom 7.5 kW, right 7.5 kW, left 7.5 kW, right 7.5 kW, left 7.5 kW , top 7.5 kW, bottom 7.5 kW, top 7.5 kW, bottom 7.5 kWKardan drivePneumatic pushersFront surface tableFeed rollers for short workpiecesManually operated pump for bed lubricationShaft diameter: 50 mm.Powered rollers in the tableFeed: 6 - 36 m/minMotorized height adjustment
Maximum feed width: 800 mmMaximum feed height: 230 mmVariable feed speed: 8 - 20 m/minPlaning head with 4 bladesExtraction diameter: 200 mmMotor 5.5 kW
Useful width: 520 mmMax pass: 300 mm Motorised table rise and fallAnti-kick-back safety device4-knife cutterblockMotor 4 kW
Capacity: 220 x 120 mm.Spindles: 5Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kWSpindle diameter: 40 mmMotorised thickness adjustment, motor 1,5 kW digital displayInfeed table1700 mm longSiko reading on the shaft positioningProtective hood with electrical contactExtension 5 x 140 mm
1.000 € 
