trabalho de chapa metálica usadas para venda (3,341)

Tube bending machine including molds Capacity up to 1 ton Auction-ID: A3-46152-19418

Joint/punching tool machining and sharpening machine, with Lenze DISCO variable speed drive, 0.37 kW, variable speed. Auction-ID: A1-49723-20

Specifications: model B-500, 230 V, 1,400 W, 6.5 A, 950 rpm, 50/60 Hz. Auction-ID: A1-41279-420

equipped with 5x hydraulic jack; including hydraulic unit; foot control; mounted on profile steel frame; bending table size 1100x900x1100 mm; transport dimensions approximately 1600x900x1300 mm; Auction-ID: A1-49001-20

Includes various accessories. Auction-ID: A1-41279-408

mounted on profile steel frame; including hydraulic unit; including accessories; Auction-ID: A1-49001-51

Extension: 580mm, including punching tools Auction-ID: A1-49001-12

Includes various accessories. Auction-ID: A1-41279-418

Cold bending: flat steel 100 x 5 mm, square steel 16 x 16 mm, round steel 18 mm, angle steel 60 x 8 mm - Hot bending: flat steel 100 x 15 mm, square steel 30 x 30 mm, round steel 30 mm, angle steel 100 x 12 mm, equipped with eccentric quick-clamping device, readable bending angle up to 120 degrees, angle stop, lever and bending templates, material stop, delivered in original packaging Auction-ID: A1-48552-139

sheet width: 1020 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 0,40 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmControl: Heidenhain iTNC 530 spindle speed:: 6000 1/min.spindle taper: CAT-50 ISOspindle drive: (S1) 10 kWtable surface area: 1300 x 600 mmtable load: 1200 kgfeed speeds: 1-10000 mm/minrapid travel x/y/z: 20/20/15 m/mindistance table - lower edge spindle: 125-725 mmtotal power requirement: 25 kVAweight of the machine ca.: 7,5 tdimensions of machine: 3600 x 2300 x 3000 mmEquipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer- Max. tool diameter 80/150 mm- Max. tool length 250 mm- Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentationWorking hours (date 29. July 2026):- Control on: 60.822 h- Machine on: 59.602 h- Program cycle: 22.283 h- Sp ...

cutting length: 2500 mmplate thickness: 3 mmdistance between columns: 2050 mmblade length: 2650 mmtotal power requirement: 3 kWweight of the machine ca.: 2,5 t- The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size.- Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6080 mmplate thickness: 6.0 mmrear stop: 1000 mmcutting angle: 0.5 - 2.0 °down holder: 29 Stkno. of strokes: ca. 10 Hub/mintotal power requirement: 22.0 kWdimensions of the machine ca.: 7300 x 2150 x 2750 mmweight: 25500 kg Current list price: approx. 150.000 eurosFeatures:- Electro-hydraulic, slide-guided sheet metal shear- Electro-hydraulic cutting angle adjustment- Electro-hydraulic cutting gap adjustment- Electrically driven backgauge with ball screws- Manual central lubrication- Cut line illumination- Ball bearings in the table- Fold-up finger guard, 1.000 mm- Side stop with T-slots, tilting stop, and scale- 5 support arms with T-slots- Photoelectric sensors on the rear of the machine- 1 freely movable foot switch Includes optional equipment:- Pneumatic sheet metal holding deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

According to photos, weight estimated Auction-ID: A1-48554-156

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-49514-228

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-49514-26

: neu : ca. 8 Wochen ab Auftragse : Spanien : 11500 €: 220.8 €: 1 : 55 to: 500 mm: 40 x 10 mm: 37 1/min: 5 kW: 1550 mm: 1200 mm: 1950 mm: 1150 kghydraulic drivetable with gaugeuser manual in GERMAN and ENGLISHCNC options on requestWe have a big stock of punches and dies for immediate dispatchWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0089 : 142 €: 1 : 835 mm: 1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0013 : 265 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0052 : 292 €: 1 : 835 mm: 80 mm: 16 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0053 : 292 €: 835 mm: 80 mm: 16 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0054 : 292 €: 1 : 835 mm: 80 mm: 16 mmMint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0145 : 840 €: 1 : 3100 mm: 40 mm: 115 mmslightly crankedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0008 : 325 €: 1 : 835 mm: 120 mm: 12 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0066 : 860 €: 1 : 550 mm: 220 mmmint conditiondividedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0067 : 860 €: 1 : 515 mm: 220 mmmint conditiondividedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1968 : 9581 : 3200 €: 1 : 1050 mm: 2 mm: 150 1/min: 500 mm: 1500 mm: 1700 mm: 1100 mm: 800 kgman. back gauge with hand wheel and scaleuser manual in GERMANdidn&apos,t according to CE rulesBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-maschinen.com/en/lp/used-machinesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Italien Eurostamp Tooling is quality,competence and precision.Since 1970, we have been producing exceptionally precise tools and offering extremely high-quality solutions for all those customers who constantly require the highest level of performance and reliability.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48000 €: 916.8 €: 6 mm: 4 mm: 70 mm: 4000 mm: 550 mm: 8.75 kW: 4250 mm: 720 mm: 2000 mm: 2015 kgEasy operation with mobile control panel with push buttonsBuilt according to EC Safety Directives and has CE MarkOne set of flanging rolls included. Radius can be selected.One set of cutting blades includedMin. cutting diameter: 600 mm (with adapter for small diameter 400 mm)Min. flanging diameter: 550 mm (with adapter for small diameter 350 mm)Rotating speed 70 rpm with adjustable max. torqueTop and bottom flanging rolls powered in rotation with planetary reducersHydraulically adjustable bottom head for both, flat and crowned dish flangingBoth cutting and flanging operation on the same headUsers ManualOptional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on re ...